controls the amount of vertical space inserted between paragraphs

learn more… | top users | synonyms

5
votes
0answers
50 views

pstool + pgfplots + parskip conflict

I've recently observed extremely strange latex bug if pstool + pgfplots + parskip packages are used at the same time. \documentclass{article} \usepackage{pstool} \usepackage{pgfplots} ...
1
vote
1answer
44 views

Inconsistent spacing with parskip option of KOMA script and amsthm

This problem is similar to Question 25346, however the proposed solution does not solve my problem. \documentclass[parskip=full]{scrreprt} \usepackage{amsmath, amsthm} \theoremstyle{definition} ...
0
votes
0answers
35 views

Spacing around thm environments when parskip is changed

I am a beginner with LaTeX and have this probably tyro problem - when I use asmthmpackage environments in combination with \parskip, the (vertical) spacing above and below theorems, definitions, etc ...
1
vote
0answers
56 views

\parskip setting effect on page break?

What is the effect of the \parskip-setting on where LaTeX does the page break? I wonder why there is a page break before the paragraph-headline with my \parskip settings (unless I insert the ...
0
votes
0answers
94 views

Change paragraph spacing without messing up the rest of the document

If I use \setlength{\parskip}{1cm plus4mm minus3mm} Or change the lengh of parskip in anyway, it not only changes the space between paragraphs, but also the space before and after equations, the ...
4
votes
1answer
66 views

Smaller parskip than half for KOMA-Script?

I am using the documentclass scrbook. To mark paragraphs I need both vertical spacing and indentation. I know that KOMA-Script supports the option parskip or halfparskip, however, this disables the ...
1
vote
1answer
42 views

Using parskip with ntheorem in a book

I am writing a mathematical book and would like to use ntheorem for theorems. Also, I would like to use parskip, because I like these styles of paragraphs more. My problem is that as soon as I include ...
8
votes
2answers
136 views

How do I control parskip within a tcolorbox?

I am using the tcolorbox to provide some beautiful frames around certain parts of my document; I use the parskip to give nice spacing between paragraphs. When I have more than one paragraph inside a ...
2
votes
1answer
64 views

skip a line aside a matrix [closed]

Well, This is what I tried to compile If you compile it the sequence of number will be next to the matrix, but I want it to be in other line. Do you know how to do that space? Thank you so much in ...
2
votes
2answers
139 views

How to skip parskip linespread for all chapter definitions?

I'm trying to skip my parskip and linespread settings for all of my \chapter definitions. Here's my complete example: \documentclass[12pt,a4paper,oneside,]{scrreprt} \usepackage[T1]{fontenc} ...
0
votes
1answer
123 views

How to use two parskips?

I'll go straight to the point. I'm using the parskip package, in particular with this option \setlength{\parskip}{0.3\baselineskip plus2pt minus2pt}. This code: Lorem ipsum dolor sit amet, ...
0
votes
1answer
369 views

Using the parskip package, I find the space between subtitles ugly

I recently started using the parskip package. However, I find the space between the ending of text and the next subtitle too small. Similarly, I find the space between the Subtitle and the subsubtitle ...
10
votes
2answers
355 views

Why does \parskip add space after section headings inconsistently?

There are already several questions dealing with the extra vertical space after section headings that result from setting \parskip to a non-zero value. Here, I just want to understand why extra space ...
4
votes
1answer
231 views

Parskip: Suppressing parskip in some places

I use the package parskip, but want to suppress the parskip in some places, i.e. after headings inserted by a specific macro. A negative vspace doesn't work, since parskip's spacing can stretch. The ...
4
votes
1answer
233 views

Fool-proof paragraph skipping

I'm using XeLaTeX, and I need to have paragraphs that are only separated by vertical space, and with no indentation. However, no matter what I try, I always get indented paragraphs. This is my ...
8
votes
2answers
531 views

Odd vertical gap with multicol, scrreprt and parskip=half

I'm having a weird vertical gap in one of my documents, which only is there when I use multicol together with \documentclass[parskip=half]{scrreprt}. Minimal example ...
2
votes
2answers
119 views

Changing the vertical spacing before and after the quoting environment when using parskip

I'm working with the quoting environment but I can't figure out how to adjust the vertical space before and after it. I would like the environment to be indented on either side like it is but not have ...
9
votes
1answer
366 views

Why is parskip=half messing up the spacing in mdframed?

without parskip: parskip=half: \documentclass[parskip=half]{scrartcl} \usepackage{blindtext} \usepackage{amsmath} \usepackage{amsthm} \usepackage{thmtools} ...
1
vote
2answers
406 views

\usepackage{parskip} and \tabular

As I had issue with line breaks, How should I do manual line breaks?, I used \usepackage{parskip}. This worked fine. But, when I have a tabular environment, there is a lot of vertical spacing before ...
6
votes
1answer
320 views

Newline, indentation, parskip - when to use what in what stylistic manner?

I intend to use scrbook. In real-life literature, English and German language, the text often looks like this: Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod ...
8
votes
1answer
813 views

Remove indent of paragraph and add line skip with tufte-latex

I'm using tufte-latex and I want paragraphs to have no indent, but a line skip instead. Normally you can achive this with: \usepackage[parfill]{parskip} Using tufte-latex this does not work ...
17
votes
2answers
186 views

Why doesn't parskip=half work together with fontenc in bibliographies?

If \usepackage[T1]{fontenc} is used and parskip=half is set: Else (either \usepackage[T1]{fontenc} isn't used or parskip=half isn't set): I consider the second one the correct style. Why is ...
3
votes
2answers
191 views

How is possible to set interline inside this block of code?

Have this code that generate an aside section: \RequirePackage[absolute,overlay]{textpos} \setlength{\TPHorizModule}{1cm} \setlength{\TPVertModule}{1cm} \newenvironment{aside}{% ...
1
vote
2answers
212 views

Correct spacing around environments without the comment symbol when using parskip?

I prefer inserting blank lines between paragraphs, and no indenting. I know that the package parskip can offer this functionality, but it comes with a catch. When writing \documentclass{article} ...
2
votes
4answers
520 views

Un-indent all paragraphs and increase the space between paragraphs

How could I un-indent all paragraphs and increase the space between paragraphs, avoiding - at the same time - unwanted changes? Package parskip works partially fine for me (it causes some unwanted ...
7
votes
1answer
180 views

\parskip stretches more than expected

I wonder if I get something wrong with TeX’s glue concept. If define a length to be 2pt plus 1pt minus 1pt I expect that the length should be exactly 2pt where possible an if not it should be between ...
7
votes
2answers
5k views

How to disable automatic indent?

I know there are some similar questions here, but I haven't found the perfect answer for my problem. I don't like that TeX indents he first line of each paragraph and I'm too lazy to write \noindent ...
6
votes
1answer
584 views

How to avoid \parskip being applied to \listoffigures etc.?

Follow-up question of Why are \listof{}{} and \listoffigures styled differently?... With the issue mentioned above I finally managed to design my \listof{}{} and \listoffigures as desired but one ...
8
votes
2answers
207 views

Ignore first parskip inside a save box

I have the following definition (MWE below) of a lrbox. If I use the normal setting parskip=off the interaction \mdf@restoreparams works as expected. Inside the lrbox I can use parskip and parindent. ...
4
votes
1answer
667 views

table of contents title removed

I wanted to change my paragraph style in my report so that there was no indentation. I used in my preamble: \usepackage[parfill]{parskip} Whilst this has dealt with the indentation, it appears to ...
1
vote
1answer
600 views

half parskip in koma scrartcl resulting in space at the end of last line before next paragraph

I wrote some things and wanted to have a part of those left aligned and on the same line some words (or formulas) right aligned. I solved that with \hfill. So sad it is not working on the last line ...
15
votes
2answers
3k views

Cancel/undo a \setlength{\parindent}{3ex}

Assume I want to have a section within an article with different indentation/parskipping. Is there a way to undo that command at the end of the section so the next section behaves again as if I never ...
16
votes
2answers
2k views

How to preserve the same parskip in minipage

I have following structure: \begin{document} Paragraph1. Paragraph2. \begin{minipage} Some paragraph1. Some paragraph2. \end{minipage} \end{document} How can I make the same spacing between ...
7
votes
1answer
2k views

\parskip inserts extra space after floats (and listings)

This question seems to be a duplicate of How to remove the skip after a listing when "\parskip" is increased with "\baselineskip"? but the answer given there doesn’t work although ...
12
votes
1answer
17k views

How to use the parskip package? (space in between paragraphs)

Sorry, because I think it's a many times asked topic. But I don't find an example which help me to understand how to create a white space between paragraphs. I think parskip is the package I need to ...
9
votes
2answers
1k views

Paragraph spacing affecting table of contents [duplicate]

Possible Duplicate: Is there an easy way to have my whole document with a space between paragraphs rather than indentation? I am trying to increase the spacing between paragraphs, using ...
3
votes
1answer
319 views

How to remove the skip after a listing when “\parskip” is increased with “\baselineskip”?

I've increased \parskip with \baselineskip to use the "skipped" paragrahs style instead of the default "indented" style. However, this causes all listings to automatically include a baselineskip ...
1
vote
1answer
559 views

paragraph design and single lines

By default LaTeX will not indent the first paragraph after a section heading indent every following paragraph not insert a space between paragraphs \section{heading} first paragraph which is not ...
1
vote
2answers
175 views

Package “preview” + parskip?

Using the "preview"-package, I want to put several paragraphs into one preview-environment. This works; however, any parskip-setting seems to be ignored. \documentclass{minimal} ...
3
votes
2answers
1k views

Automatically add vertical space /only/ between two sequential paragraphs

I am using KOMA-script scrreprt class. I know I can use \usepackage{parskip} or \setlength{\parskip}{12pt}, but both of these also affect headings. Adding \vspace{12pt} manually between all two ...
3
votes
1answer
2k views

A new paragraph followed by a big skip

Here is the code I am using to place a heading with a line above and below the text, from this post. \newcommand{\rheading}[1] { \par \bigskip \hrule height 1pt \kern 5pt \hbox to ...
8
votes
1answer
1k views

Memoir parskip package

How do I get the same effect as using the parskip package when using the memoir class. I want no indents, and spaces between paragraphs. What is the proper way to do this in the memoir class?
4
votes
4answers
8k views

Avoid large spaces between text and equations

I use the options \renewcommand{\baselinestretch}{1.25} \setlength{\parskip}{0pt} \setlength{\parindent}{0pt} in the preamble of my document and most of the time the document looks like intended. ...
12
votes
1answer
6k views

Too much space after sections when I change parskip

I changed the parident and parskip of my document. But now there is a huge empty space after the sections. How can I reduce the space after a section? \documentclass[12pt,a4paper]{scrartcl} ...
14
votes
3answers
2k views

What is the default \parskip in memoir?

Everywhere the usual word is that it is 0. But that is clearly wrong, it is 0 + some rubber length. But how is that rubber length defined? In my search I found the following definition in the memoir ...
11
votes
2answers
1k views

Rhythm: different values for parskip and baselineskip in scrartcl

I am writing some small demo files, each trying to implement a specific advice from Bringhurst's Elements of Typograhpic Style. He recommends to keep the vertical rhythm of the page, and to return to ...
11
votes
3answers
3k views

Too much whitespace before lists when changing the \parskip length

I have the following in my preamble: \addtolength{\parskip}{\baselineskip} \setlength{\parindent}{0 pt} Now there is too much whitespace before an enumerate list environment, in the example I have ...
6
votes
1answer
13k views

Remove/Reduce vertical space between paragraphs for acm_proc_article-sp

I need to use a certain document class (acm_proc_article-sp) that introduces vertical space between paragraphs. I want to remove or at least reduce that space, which I am unable to. Here is a minimal ...
9
votes
1answer
4k views

Increasing paragraph indentation in KOMA script

The default parindent in KOMA scrartcl is too small for me. I remember reading somewhere that just changing \parindent directly is not wise, since it also affects other things (like itemize etc). And ...
15
votes
3answers
8k views

Distance between chapter title and text

In my scrreprt I've changed distance between paragraphs with \setlength{\parskip}{9pt}. But \parskip changes also distance between chapter title and the paragraph. How can I change distance between ...