{parts} is about the \part command which is one of the sectioning commands forming the logical structure of documents. This tag should only be used *in addition* to the more general {sectioning}.

learn more… | top users | synonyms

0
votes
2answers
25 views

Part contents in TOC in two lines

I have reached this: To look like this: So that the page number is in front of the title of the part and aligned with the other page numbers, and the title of the part is aligned with the part ...
0
votes
1answer
63 views

How to change name of “part”s in table of contents

I am writing a long document with two main parts and appendices, and I am struggling to customize the table of contents. I have the following code: \documentclass[12pt,twoside,a4paper,openright]{...
2
votes
1answer
40 views

Split table of contents on “Part” page

In the code below, there is a table of contents on the "Part" page. However, I have a lot of chapters in Part One of the document and the contents overextends the page. How can I split the table of ...
2
votes
0answers
41 views

How to reference sections in other chapters mentioning the chapter?

I have an article class document with a structure like this. Part A Section 1 Section 2 Part B Section 1 Section 2 I want to reference Section 1 in part A from Section 2 in part B. When I ...
2
votes
1answer
34 views

Centering part name in book

How can I center the part name in the TOC ? I want the TOC to print : Partie I - First part Chapitre 1 - First chapter Chapitre 2 - Second one Instead ...
3
votes
3answers
214 views

Part title framed

I was wondering how I could put a blue ({cmyk}{1,0.80,0.30,0.05}) coloured frame around my chapter titles, leaving out "PART 1" and just give the part title name itself, as is depicted in the picture ...
1
vote
0answers
36 views

Problem “\part” before a include [closed]

I'm new in latex using, and there's something I can't understand yet. I'm splitting my thesis in chapter added by \include as an upper division structure I'm using \part. As in the following (.tex ...
6
votes
4answers
2k views

How to increase the numwidth for a part in ToC?

I am using a Koma-Script Book and I would like to begin the part numbers from 2012. However, 4 digit part number entries are causing a problem in the tableofcontents. There is a hbox overfull and the ...
0
votes
0answers
13 views

How can you go back to the root after using the “Part” command in Latex? [duplicate]

Here is the scenario: You have a book document, you use \part command to create different 3 parts each containing a few chapters. At the end, you want the last two chapters to be under the root. This ...
4
votes
3answers
54 views

Part cross reference name clash with redefinition of \thepart

I want to use some automatic cross referencing (I am using hyperref in the whole document which I customized) to write something like : We see in \autoref{partname} that To print : We see in ...
2
votes
2answers
62 views

Center the “part name” in the table of contents [duplicate]

I want to change in the table of contents the look of the parts. I reproduced on Word what I want : I've looked into the site if the question was already answered but I didn't found what I want. ...
22
votes
6answers
11k views

How to get part name in LaTeX ?

Actually I am using the fancyhdr package, and trying to put the current part name in the right header. I know that \rightmark and \leftmark are used to represent the current section and chapter ...
2
votes
1answer
18 views

Vertical positioning of “part”-level header

I am using the \part sectioning with the following definition: \def\@part[#1]#2{% <------------------------------- \part[..]{...} \ifnum \c@secnumdepth >\m@ne \refstepcounter{part}% ...
0
votes
0answers
20 views

How to flow page numbers across parts

(This question has been asked before but i have found no satisfactory answer, that is, nothing that actually works). Using: This is pdfTeX, Version 3.14159265-2.6-1.40.16 (TeX Live 2015) (preloaded ...
1
vote
1answer
91 views

My personal TOC

I have read about this: Pretty table of contents Can someone tell me how to do that circle for my \part? I tried to copy some code but obviously did not work. \documentclass[twoside]{book} \...
3
votes
2answers
159 views

How to remove period after part number in TOC (KOMA used)

How to remove period after part number in TOC (KOMA used)? My solution was to set tocloft package, which is provide command \cftpartaftersnum but I do not want to use it for some compatibility reasons....
0
votes
1answer
78 views

TOC Indent CHAPTER past PART

I'd like to figure out how to indent Chapters in my TOC past the Parts headings. I'd like to do this to improve legibility. This is how my document is laid out in main.tex \documentclass[oneside,11pt,...
3
votes
1answer
141 views

Do not show chapter thumb on first chapter page

In the MWE below, the code modified by Gonzalo Medina found here, I would like to have the chapter thumb to not show up just on the first page of the chapter (i.e. the page where the chapter number ...
2
votes
1answer
33 views

Wrap part title in part's page with titleformat

I am using titleformat to make some adjustments in the part's page and I want to wrap the title in half, to be centered as a text, but on the right side of the page. Any ideas? This is my code \...
3
votes
0answers
63 views

Function to create a Chapter color

I am writing a project for a course and I want to make each Part's Chapters' first page to have a different color on the side. This is my code. (I put % (comment) in the problem for the code to run.) ...
5
votes
2answers
143 views

If command in LaTex

I am writing a project for a course and I want to make each Part to have a different color image on the side. But to do this I have to make a loop (that's what I think) to recognize the Part and and ...
1
vote
2answers
48 views

Force text between part and chapter to be on the next page after the part title

I have not found a better title sorry. I have a document (book class) in which I have something like : \part{MyPart} The brief introduction of my part, where I present the three chapters I will ...
1
vote
0answers
69 views

How to create a custom \part in LaTeX book?

I am trying to create a custom \part for a book in XeLaTeX. I'd like to be able to have the Part number and title in larger font as is typically found. However, I'd also like to have a short paragraph ...
0
votes
0answers
66 views

change header for appendix part

I am currently writing a thesis. I need to work with this template: https://gitlab.cg.tuwien.ac.at/auzinger/vutinfth/tree/master I define several chapters with \chapter{chaptername}. The head for ...
1
vote
1answer
55 views

Is there a way to render the name of a part on both sides of the page for the book documentclass?

Is there a way to render the name of a part on both sides of a page for the book documentclass? Essentially, rather than displaying the inserted page for the part title with a blank back, I would ...
2
votes
1answer
44 views

Parts not working when using multiple languages with polyglossia

I'm working on a book document with xelatex. The document is divided into parts, and I have the occasional need to switch between two languages. I've found that when my document contains more than ...
3
votes
1answer
109 views

Putting appendix outside the last part

I have the following LaTeX structure: \documentclass{book} \usepackage{hyperref} \begin{document} \tableofcontents \chapter{Introduction} \part{Fruits} \chapter{The Apple} \chapter{The Peach} \...
1
vote
1answer
62 views

appearance of parts titles

I am writing my thesis which is divided in two parts. If I use the following simplified code: \begin{document} \part{Title of the first part} ... \part{Title of the second part} .... \end{...
2
votes
0answers
68 views

Reset/clear Part with \backmatter in a customized book.cls? [closed]

I'm producing a fairly large volume using a customized version of book.cls with four Parts containing several chapters in \mainmatter, followed by a \backmatter that contains only the Bibliography for ...
2
votes
1answer
57 views

Add “Part” before the number in Toc when using titlesec package

According to other answers here and elsewhere on the Internet, to add "Part" before the part number in the ToC you do this: \usepackage{tocloft} \renewcommand\cftpartpresnum{Part~} However, I've ...
2
votes
1answer
121 views

Make part name uppercase with lower case part number in toc (KOMA)

I tried to change the part name in the toc to upper case letter but unfortunately it doesn't work. Has someone an idea how to change the title to upper case but to set the partnumber to lower case(in ...
0
votes
1answer
119 views

Titletoc: split part title in two lines

I need to split the part title in the ToC as follow: Part I title of the part I am using the titletoc package. It seems easy with the chapter, but I am not able to figure out how to do it on parts. ...
2
votes
1answer
120 views

Insert part title in footnote in beamer presentation

I have a presentation made using beamer. I would like to have a part title in the footer. I have succeeded in putting the part number with \thepart, but haven't been able to put the title. Is this ...
1
vote
1answer
49 views

Old code to define \@part in scrbook does not work with TeX Live 2014 and I need a replacement

I have to compile an old book from 2007 which uses scrbook (from KOMA-script v3.12) and redefines the part page. The definition of \@part does not work any more (TL 2014), though. Here's a minimum non-...
4
votes
1answer
205 views

Reset counter \section in \part*

I'm a rookie with LaTeX, I'm using LyX, but I think this is a LaTeX problem. Im using this LaTeX preamble for reset counter after parts \usepackage{chngcntr} \counterwithin*{section}{part} But it ...
6
votes
1answer
56 views

How to distinguish numbered from unnumbered parts?

This question is analogous to my earlier recent question. The other questions refers to chapters, this one refers to parts. The solution for chapters does not seem to work for parts. I am writing a ...
3
votes
1answer
69 views

How do you set page numbering on the “part” page?

I'm trying to get something together for my thesis and part of the organization I would like to use employs the \part{} feature (it is to the chapter what a chapter is to a subsection). The beginning ...
5
votes
4answers
138 views

How to add \part only to TOC?

I wonder how I can add a \part entry to the TOC without any output in the the document itself. I actually got a nearly working version: \begin{filecontents}{chap1.tex} \chapter{Chapter} This is a ...
6
votes
2answers
94 views

Modifying what \part prints

I have uploaded a picture. I wrote \part{Functions from $\mathbb{R}^{n}$ to $\mathbb{R}^{m}$} and it printed what you see in the picture. However I just want it to be seen as I Functions from....
3
votes
1answer
355 views

How to proper end a part

I have downloaded the template from latextemplates.com. It has something called parts which I would like to use. However, I dont want e.g. the references to be inside of the last defined part. How do ...
15
votes
1answer
1k views

customizing part style with Tikz

How can I customize part style like below picture?
1
vote
1answer
283 views

Several appendix chapters after each part in book

I have a plain latex document with book document class, which has several \parts. And I would like to organize my book in the following manner: Part I Chapter 1 Chapter 2 Chapter 3 Chapter* (...
0
votes
1answer
128 views

customizing part style

I'm trying to custom my part style, how could I customize it like below picture?
3
votes
1answer
192 views

How can I set Empty pagestyle at the beginning of a part?

I am creating a document, that is separated in parts. What I would like to do, is have an empty \pagestyle at the beginning of the part. My code is \documentclass[11pt]{book} \usepackage{lipsum} \...
1
vote
1answer
117 views

How to include an abstract on a Part page?

I want in Part I and an abstract on the same page (so I want make different part with different abstract, one abstract per part) \documentclass[a4paper,twoside,11pt,final]{report} \usepackage[latin1]{...
2
votes
1answer
208 views

Epigraph on Part Page

I used the solution given here to get a nice, customizable epigraph on a part page. However, the solution uses the command \usepagestyle{epigraph}, and because of this, the part page has a pagenumber,...
1
vote
2answers
150 views

Any command from KOMA-Script to set part title and partnumber in one line?

Is there any command from KOMA-Script to set the part title and partnumber in one line and if the title is long enough to get wrapped, indentation would be applied to the second line (align with the ...
0
votes
1answer
80 views

sectioning / document hierarchy issue / start new root / move section up one level [duplicate]

Sorry for the bad title, but couldn't come up with something better. I have a problem with the section-hierarchy of my latex document: This is my document structure: \begin{document} [...] \part{ ...
2
votes
1answer
53 views

Grouping bookmarks

I am writing my thesis and I would like to collect the parts in two (or more) groups without modifying the header styles. Namely, I have: Part 1 ... Part 2 ... Part 3 .... Part 4 ... and I want to ...
1
vote
0answers
52 views

Introducing a “sub-part” within the Book Class

Is there a straightforward way to introduce a "sub-part" within the Book Class (between "part" and "chapter")? Here is an illustration. Suppose I write a long book discussing the natural sciences, and ...