{positioning} is about positioning document elements. Use this tag in addition to other tags specifying what should be positioned.

learn more… | top users | synonyms (1)

2
votes
1answer
113 views

Fixing the photo position in ModernCV

I used an offset of 2.5cm for the title and now I want to move the photo 2.5cm more to the left. How can I get that done? My MWE: \documentclass[11pt,a4paper]{moderncv} ...
1
vote
1answer
69 views

Minipage not centered in frame

I'm making a presentation, and I have a lot of graphs and text. In one specific frame, I'm using the \only command to separate the graphs and the text. Here's the code: \documentclass{beamer} ...
1
vote
1answer
33 views

Make a float “between” parts

Well say I have a float (figure/table) - how can I make it so this float is always before a certain piece of text (and always after another). If the float would switch to the page the next it should ...
2
votes
1answer
136 views

Node position in decision tree with TikZ

Hi I am trying to make a decision tree in Latex, and for now I have that But my tree will probably be important, so that I want my nodes to be closer to the left, but not in a vertical dimension. ...
1
vote
1answer
30 views

Text automatically goes to the top of a table even if text position immediately after the table [duplicate]

This is the top \begin {table} \caption {Table Title} \begin{center} \begin{tabular}{| l | l | l |} \hline Measurement& Uncertainty & Range \\ \hline \hline \end{tabular} \caption*{What is ...
0
votes
0answers
19 views

\include{} with picture environment takes whole page [duplicate]

Octave gives me the possibility to safe a figure as .tex document, which then basically just includes one big picture-environment that includes the blank figure and adds the labels. It looks like this ...
1
vote
1answer
65 views

How do I keep one figure in its place and move the rest to the end?

I am working on my thesis with many chapters. In one of it, I use a lot of figure and table. I have been able to use endfloat to send all of the figure and table. However, other chapter has only one ...
5
votes
2answers
577 views

Tikz coordinate calculation

Consider the followinting tikz picture. I need to place the segment re-D so that its measure will be 8/9ths the measure of the segment ut-C. Now I just placed it at a random distance of 8/9 between ut ...
3
votes
3answers
80 views

Text in Footer of Document

Whenever my class handouts require a second side, I add the indicator Page 2$\rightarrow$ at the bottom (flush right) to spotlight the fact that there is additional content on the flip-side. ...
4
votes
2answers
32 views

Positioning/centering a diagram with picture environment

i just put up some Dynkin diagram (already thanks to you guys :)) but it appears that this is too large fir the page and is thus not centered, as the code shows : \documentclass{article} ...
1
vote
1answer
87 views

Problem of positioning and size of the additional text on tikz/gnuplot figures

I want to at my legend using tikz environment on top of my figures generated with gnuplot. I am happy with the result when I comment the part \node[anchor=center, text width=0.39cm, xshift=0cm, ...
6
votes
1answer
106 views

3D surface plot with axis inside plot

I try to draw the energy surface of a magnetic particle. For this i want the axis system to come from the inside of the particles pointing to the ouside. Ist ist basically the example below, but with ...
2
votes
1answer
54 views

Insert a figure on the corner of the page

I am using the following title page: \documentclass[12pt]{article} \usepackage{amsmath} \usepackage[hidelinks]{hyperref} \usepackage[usenames,dvipsnames]{color} \usepackage{tikz} ...
2
votes
1answer
63 views

An alternative way to align figure and table in \subfloat

So I realise this has been asked/alluded to a couple of times previously as in: Figure and table side-by-side in subfloats Table and Figure side-by-side with Table caption above, Figure caption ...
3
votes
2answers
193 views

adding a coloured-box in flowchart

I am trying to make a flowchart in Latex, I want to put some of steps in a coloured box with a label, e.g. Deterministic Annealing, I added scope part but it doesn't compile with the new change. ...
3
votes
1answer
101 views

Multipart graph with linear and circular node patterns

I'm trying to draw a graph (PDF output of code below attached) that's a linear process, with a potentially circular element in it. As you may see in the upper picture, the the B,C,D elements aren't ...
0
votes
0answers
57 views

I have 3 data series and 2 different y-axis. How can I add, outside the graph, the legend for each of three series?

Does someone know how can i change the position of my legend to right-side of my graph? I try many things but i can't. Please give me some help! Here is my code! \resizebox{\textwidth}{!}{ ...
0
votes
1answer
69 views

Place a table on a new landscape page in a two column paper

Very related to this question and some of the comments therein, I need to insert a landscape page for a wide table, in a two column document. As suggested there, I have tried to use \afterpage{% ...
0
votes
0answers
16 views

forcing certain figure environments to be on top of page globally? [duplicate]

There are certain environments, such as the figure environment and environments that I defined myself that I want to force to appear (by default) on the top of a page, in a global way (instead of ...
1
vote
0answers
84 views

Revisiting middle of page footnote problem

Configuration: Report document class Problem: \usepackage[bottom]{footmisc} is not producing footnotes to the bottom of page as it should, but rather in the middle of a page with few lines of body ...
4
votes
2answers
268 views

Tikz-Connecting nodes with multiple lines

I am trying to reproduce the following image I made in "Power point". Although, there is no difficulty in designing the boxes, I find it rather hard to properly position the red and black lines. ...
2
votes
1answer
37 views

Constrain a float to be positioned on right page only?

How can I constrain a float to be positioned only on a new right (recto) page and never on a verso page? I'd like behaviour similar to \begin{figure}[p] But as if there were a positioning option ...
4
votes
1answer
77 views

Sideway tables flipping back and forth

I'm joining my papers for my thesis and face an issue with sideways tables. I have several sideways tables. In each separate paper, they are fine, always top on the left. When I put the papers ...
2
votes
1answer
111 views

accuratelly place a node above and left of another node

I am trying to draw a box which is defined as a node, next to another node. My code is \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{positioning} \tikzset{ pipe/.style = { ...
2
votes
1answer
53 views

Best subfigure placement wrt length of subcaptions

My Problem is twofold: First i'm not sure what the established/best way is to place the captions in question. Secondly i don't know how to do implement my ideas with Latex. My supervisor ...
1
vote
1answer
143 views

need to put a figure above another figure in beamer

In beamer I created a slide like using code \documentclass[slidestop,compress,mathserif]{beamer} \usepackage[latin1]{inputenc} \usepackage{verbatim} \usepackage{graphicx} \usetheme{Boadilla} ...
3
votes
3answers
79 views

move \footnoterule to right

I would like to move a \footnoterule to right, by 3cm, to be aligned with a footgroup moved to right by 3 cm. I know that footnote rule use a \hrule To move the rule, I should put it in a \vbox, and ...
1
vote
1answer
76 views

How can I specify a minimum length for my graph's edges?

I've just started to use the (new?) graphdrawing library (see section 27 of the TikZ & PGF 3.0.0). It's awesome! However, I can't seem to effect a minimum length for my graph's edges. That's ...
4
votes
2answers
487 views

Move a tikz node somewhat below in relative positioning

I have the following code (stripped down from a much larger one). (I understand that there are numerous questions (and answers including this excellent one) on relative positioning of nodes, but they ...
2
votes
2answers
155 views

Relative node positioning with calc library

Hi I'm trying to place same nodes relative to each other. I'm trying to place a node in the middle between two other nodes, but also half a cm to the right. \usepackage{tikz} \usetikzlibrary{calc} ...
1
vote
1answer
57 views

Float after paragraph on the same page

I always put my float environments at the end of the paragraph where it was first referenced. But I have a problem when the paragraph is split over two pages (beginning at the bottom of the first ...
0
votes
0answers
118 views

How to design and place different things in LaTeX?

Is it possible to design something in Scribus and then convert the Scribus document to an .tex-file? That would be nice. In Scribus (free alternative to InDesign and Quarkexpress) you can see your ...
5
votes
2answers
77 views

boxing the entire page

Sorry if you don't understand me, but English is not my native language. Is it possible to put a frame at x cm from the right and left edges of the page and at y cm from the up and bottom edges of ...
6
votes
1answer
58 views

How to pass figure position to keyval macro?

I want to wrap a macro around figure-env to make my document more readable. Here is minimal example of how it is now: \documentclass[10pt,a4paper]{article} \usepackage{keyval} \makeatletter ...
3
votes
1answer
353 views

How to position TikZ nodes

How can I shift the system node right of control1 but vertically centered between control1 and control2? \tikzstyle{controller} = [draw, fill=blue!20, rectangle, minimum height=3em, minimum ...
1
vote
1answer
131 views

Placing graphics in chapter section

I am trying to typeset the chapter header for a book. It will need to include a custom image to the right of the text Chapter #. I have currently tried to achieve this using multi cols, e.g. ...
2
votes
1answer
47 views

Usage of subcaption leads to a misalignment (horizontal and vertical)

I use the package "subcaption" to put my pictures into my script. I prefere to use subcaption instead of subfig because if I use \continuedFloat it makes a correct enumeration. Sadly the last two ...
1
vote
1answer
75 views

Table position at Top Problem

I am trying to place my table at the top of page but it seems there is something I am missing. First of all here is what my document structure \documentclass{article} \begin{document} ...
0
votes
0answers
53 views

Big watermark for tiled pages

I want to arrange pages of my presentation in a rectangular array. I want to print on each page (what may be the equivalent of) a watermark which is a portion of a glyph. For this discussion let us ...
3
votes
1answer
68 views

Landscape table in multicol-environment

I am facing a very weird problem; see the output: I am trying to get my table in the landscape mode within a two-column layout. Therefor the package "multicol" is used. The table does not appear on ...
2
votes
1answer
60 views

How to add a one-column figure with caption after title and before abstract in a two-column document?

I'm trying to add a teaser (figure) after title and before the abstract section in a document with acm_proc_article-sp class but no luck! Tried to use the following solution by David Carlisle, but ...
5
votes
1answer
83 views

How label position and color can be modified in tikzpicture in posters?

I am working on a poster with fancytikzposter package, I cutted out the problematic part, it can be downloaded from here. I created a tikzpicture inside the poster and some problems occured: ...
2
votes
0answers
61 views

image position problem

I have a problem with images positioning. I dont know why but latex puts the last figure on a new page. I want it all at the same page. And I cant find what is wrong. Here is my code: ...
2
votes
1answer
65 views

Figure at the bottom of same page as another item

I'm writing up lecture notes which include quick questions for the reader, together with upside-down answers at the bottom of the page. The code I'm currently using for this has basically the ...
3
votes
2answers
188 views

Macro for moving hat symbol up

I use mathpazo font package and I think the hat symbol is too low. Can I make a macro to change behavior of all my hats? This question has a good example, but I don't want to have to retype all of ...
3
votes
2answers
85 views

How to move one y label to the right

As you see the image below, the label "4" on y-axis gets in the way with the plot. How do I move it to the right? I tried adding the following statement: psyTick[ylabelPos=right](4){4} But ...
3
votes
1answer
43 views

Tables and figures at the end of each chapter

Right now I have all my figures and tables at the end of my dissertation. To do this I'm using this: \usepackage[nomarkers]{endfloat} \renewcommand{\efloatseparator}{\mbox{}} ...
1
vote
1answer
49 views

Starting a picture at the left position and enlarging it to fill the whole page [duplicate]

I'm having an image which I need to display so that it takes up most of a page (the total width of the page to be exact). The picture itself has a larger width than height and is so big in width that ...
2
votes
4answers
91 views

Centering an image vertically

I'm currently having a few problems with centering an image on a page (both vertically and horizontally) while enlarging the image so that it is taking the whole width of the page. I'm managing to ...
3
votes
1answer
67 views

Scheduling a float to appear on a specific, later page?

Consider the following MWE - let's say it's called test.tex: \batchmode % \ifx\article\undefined % \documentclass[12pt,journal,onecolumn,twoside,draftcls,letterpaper]{IEEEtran} % \else % ...