{positioning} is about positioning document elements. Use this tag in addition to other tags specifying what should be positioned.

learn more… | top users | synonyms (1)

2
votes
1answer
41 views

Scheduling a float to appear on a specific, later page?

Consider the following MWE - let's say it's called test.tex: \batchmode % \ifx\article\undefined % \documentclass[12pt,journal,onecolumn,twoside,draftcls,letterpaper]{IEEEtran} % \else % ...
0
votes
0answers
19 views

\include{} with picture environment takes whole page [duplicate]

Octave gives me the possibility to safe a figure as .tex document, which then basically just includes one big picture-environment that includes the blank figure and adds the labels. It looks like this ...
1
vote
1answer
20 views

How do I keep one figure in its place and move the rest to the end?

I am working on my thesis with many chapters. In one of it, I use a lot of figure and table. I have been able to use endfloat to send all of the figure and table. However, other chapter has only one ...
3
votes
3answers
68 views

Text in Footer of Document

Whenever my class handouts require a second side, I add the indicator Page 2$\rightarrow$ at the bottom (flush right) to spotlight the fact that there is additional content on the flip-side. ...
5
votes
2answers
167 views

Tikz coordinate calculation

Consider the followinting tikz picture. I need to place the segment re-D so that its measure will be 8/9ths the measure of the segment ut-C. Now I just placed it at a random distance of 8/9 between ut ...
4
votes
2answers
29 views

Positioning/centering a diagram with picture environment

i just put up some Dynkin diagram (already thanks to you guys :)) but it appears that this is too large fir the page and is thus not centered, as the code shows : \documentclass{article} ...
38
votes
4answers
180k views

LaTeX figures side by side [duplicate]

Possible Duplicate: Caption issue when placing figure side by side I want to place 2 images side by side in LaTeX. I have 2 .png files and I don't understand how to do it in LaTeX. I have ...
1
vote
1answer
39 views

Problem of positioning and size of the additional text on tikz/gnuplot figures

I want to at my legend using tikz environment on top of my figures generated with gnuplot. I am happy with the result when I comment the part \node[anchor=center, text width=0.39cm, xshift=0cm, ...
6
votes
1answer
74 views

3D surface plot with axis inside plot

I try to draw the energy surface of a magnetic particle. For this i want the axis system to come from the inside of the particles pointing to the ouside. Ist ist basically the example below, but with ...
2
votes
1answer
39 views

Insert a figure on the corner of the page

I am using the following title page: \documentclass[12pt]{article} \usepackage{amsmath} \usepackage[hidelinks]{hyperref} \usepackage[usenames,dvipsnames]{color} \usepackage{tikz} ...
2
votes
1answer
28 views

An alternative way to align figure and table in \subfloat

So I realise this has been asked/alluded to a couple of times previously as in: Figure and table side-by-side in subfloats Table and Figure side-by-side with Table caption above, Figure caption ...
3
votes
2answers
118 views

adding a coloured-box in flowchart

I am trying to make a flowchart in Latex, I want to put some of steps in a coloured box with a label, e.g. Deterministic Annealing, I added scope part but it doesn't compile with the new change. ...
3
votes
1answer
64 views

Multipart graph with linear and circular node patterns

I'm trying to draw a graph (PDF output of code below attached) that's a linear process, with a potentially circular element in it. As you may see in the upper picture, the the B,C,D elements aren't ...
0
votes
0answers
38 views

I have 3 data series and 2 different y-axis. How can I add, outside the graph, the legend for each of three series?

Does someone know how can i change the position of my legend to right-side of my graph? I try many things but i can't. Please give me some help! Here is my code! \resizebox{\textwidth}{!}{ ...
0
votes
1answer
43 views

Place a table on a new landscape page in a two column paper

Very related to this question and some of the comments therein, I need to insert a landscape page for a wide table, in a two column document. As suggested there, I have tried to use \afterpage{% ...
0
votes
0answers
13 views

forcing certain figure environments to be on top of page globally? [duplicate]

There are certain environments, such as the figure environment and environments that I defined myself that I want to force to appear (by default) on the top of a page, in a global way (instead of ...
2
votes
1answer
59 views

Keep float out of a environment (for example definitions)

I knew that floats float around and sometimes are placed far away from where one wants them to be. With the times I learned to work with it, and there are already many posts about it. I have a kind ...
1
vote
0answers
55 views

Revisiting middle of page footnote problem

Configuration: Report document class Problem: \usepackage[bottom]{footmisc} is not producing footnotes to the bottom of page as it should, but rather in the middle of a page with few lines of body ...
2
votes
1answer
34 views

Constrain a float to be positioned on right page only?

How can I constrain a float to be positioned only on a new right (recto) page and never on a verso page? I'd like behaviour similar to \begin{figure}[p] But as if there were a positioning option ...
3
votes
2answers
124 views

Tikz-Connecting nodes with multiple lines

I am trying to reproduce the following image I made in "Power point". Although, there is no difficulty in designing the boxes, I find it rather hard to properly position the red and black lines. ...
4
votes
1answer
61 views

Sideway tables flipping back and forth

I'm joining my papers for my thesis and face an issue with sideways tables. I have several sideways tables. In each separate paper, they are fine, always top on the left. When I put the papers ...
3
votes
3answers
53 views

move \footnoterule to right

I would like to move a \footnoterule to right, by 3cm, to be aligned with a footgroup moved to right by 3 cm. I know that footnote rule use a \hrule To move the rule, I should put it in a \vbox, and ...
2
votes
1answer
61 views

accuratelly place a node above and left of another node

I am trying to draw a box which is defined as a node, next to another node. My code is \documentclass{standalone} \usepackage{tikz} \usetikzlibrary{positioning} \tikzset{ pipe/.style = { ...
2
votes
1answer
36 views

Best subfigure placement wrt length of subcaptions

My Problem is twofold: First i'm not sure what the established/best way is to place the captions in question. Secondly i don't know how to do implement my ideas with Latex. My supervisor ...
0
votes
1answer
136 views

Framed float box, spanning two columns in paracol

I'm looking for a simple, framed, float box-environment that has (or can have by construction) a star equivalent (like figure* or table*) so that it may span both columns in the paracol environment. ...
1
vote
1answer
73 views

need to put a figure above another figure in beamer

In beamer I created a slide like using code \documentclass[slidestop,compress,mathserif]{beamer} \usepackage[latin1]{inputenc} \usepackage{verbatim} \usepackage{graphicx} \usetheme{Boadilla} ...
15
votes
4answers
952 views

Hyperref jumps to the wrong equation if the equation has a \tag and cleveref is used

The problem I'm writing a document where all of my equations are labeled, not by numbers, but by names, which I provide with amsmath's \tag command. I also use cleveref for ease of ...
1
vote
1answer
60 views

How can I specify a minimum length for my graph's edges?

I've just started to use the (new?) graphdrawing library (see section 27 of the TikZ & PGF 3.0.0). It's awesome! However, I can't seem to effect a minimum length for my graph's edges. That's ...
4
votes
2answers
141 views

Move a tikz node somewhat below in relative positioning

I have the following code (stripped down from a much larger one). (I understand that there are numerous questions (and answers including this excellent one) on relative positioning of nodes, but they ...
1
vote
2answers
76 views

Two figures with side captions next to one another

I currently have the following figure placed at the bottom of my page: \begin{SCfigure}[][h] \centering \caption{Georg Kantor (1845--1918)} ...
2
votes
2answers
89 views

Relative node positioning with calc library

Hi I'm trying to place same nodes relative to each other. I'm trying to place a node in the middle between two other nodes, but also half a cm to the right. \usepackage{tikz} \usetikzlibrary{calc} ...
5
votes
2answers
70 views

boxing the entire page

Sorry if you don't understand me, but English is not my native language. Is it possible to put a frame at x cm from the right and left edges of the page and at y cm from the up and bottom edges of ...
2
votes
2answers
301 views

Floating figures and tikzposter

I'm trying to use the class tikzposter to write a scientific poster. I need to link the figures to my text, therefore I need to use \caption and \label commands. It seems impossible to use floating ...
1
vote
1answer
46 views

Float after paragraph on the same page

I always put my float environments at the end of the paragraph where it was first referenced. But I have a problem when the paragraph is split over two pages (beginning at the bottom of the first ...
0
votes
0answers
98 views

How to design and place different things in LaTeX?

Is it possible to design something in Scribus and then convert the Scribus document to an .tex-file? That would be nice. In Scribus (free alternative to InDesign and Quarkexpress) you can see your ...
1
vote
1answer
60 views

Table position at Top Problem

I am trying to place my table at the top of page but it seems there is something I am missing. First of all here is what my document structure \documentclass{article} \begin{document} ...
5
votes
1answer
46 views

How to pass figure position to keyval macro?

I want to wrap a macro around figure-env to make my document more readable. Here is minimal example of how it is now: \documentclass[10pt,a4paper]{article} \usepackage{keyval} \makeatletter ...
5
votes
1answer
3k views

Latex : algorithm not display under correct section

I'm using the algorithm2e package to put algorithm in my Latex documents. In my document, I have something like this : \section My algorithms \subsection Algo 1 code for first algorithm ... ...
3
votes
1answer
92 views

How to position TikZ nodes

How can I shift the system node right of control1 but vertically centered between control1 and control2? \tikzstyle{controller} = [draw, fill=blue!20, rectangle, minimum height=3em, minimum ...
2
votes
1answer
39 views

Usage of subcaption leads to a misalignment (horizontal and vertical)

I use the package "subcaption" to put my pictures into my script. I prefere to use subcaption instead of subfig because if I use \continuedFloat it makes a correct enumeration. Sadly the last two ...
4
votes
1answer
1k views

How do I position title, frametitle, navigation bar and contents in arbitrary absolute positions?

I am trying to adapt the structure of a slide in beamer in order to match a background I would like to use. However, if I just insert the components of the frame (title, frametitle, contents), things ...
2
votes
2answers
74 views

imported table positioning

I am importing a data table into a document and want the table to be within the text. When I import with \input{bodyrate}[htpb], the table is placed at the end of the document and [htpb] is printed ...
0
votes
0answers
41 views

Big watermark for tiled pages

I want to arrange pages of my presentation in a rectangular array. I want to print on each page (what may be the equivalent of) a watermark which is a portion of a glyph. For this discussion let us ...
2
votes
1answer
256 views

Curve CV - Photo in Rubric

I just started to create my CV by using CurVe package (CurVe at CTAN). But while I tried to include my photo inside the personal category I had some troubles, because I was not able to place the image ...
2
votes
1answer
41 views

Landscape table in multicol-environment

I am facing a very weird problem; see the output: I am trying to get my table in the landscape mode within a two-column layout. Therefor the package "multicol" is used. The table does not appear on ...
8
votes
1answer
8k views

Putting two images next to each other that are 0.5\textwidth wide

I need to put 4 images in one group and put it on the page. All images have the same length and width, however I have problem with placing them by two in a row. I used this code \begin{figure}[h] ...
2
votes
1answer
32 views

How to add a one-column figure with caption after title and before abstract in a two-column document?

I'm trying to add a teaser (figure) after title and before the abstract section in a document with acm_proc_article-sp class but no luck! Tried to use the following solution by David Carlisle, but ...
5
votes
1answer
64 views

How label position and color can be modified in tikzpicture in posters?

I am working on a poster with fancytikzposter package, I cutted out the problematic part, it can be downloaded from here. I created a tikzpicture inside the poster and some problems occured: ...
2
votes
1answer
57 views

Figure at the bottom of same page as another item

I'm writing up lecture notes which include quick questions for the reader, together with upside-down answers at the bottom of the page. The code I'm currently using for this has basically the ...
2
votes
0answers
38 views

image position problem

I have a problem with images positioning. I dont know why but latex puts the last figure on a new page. I want it all at the same page. And I cant find what is wrong. Here is my code: ...