One of the standard {document-classes}, and one of the simplest to contain the {sectioning} command {chapter}; similar to {book}.

learn more… | top users | synonyms

0
votes
4answers
43 views

Vertical line in the middle of the page

How can I get a vertical line in the middle of the page ? and I want also to write same text in the right and the left of the vertical bar (like this example) : I tried \rule but i don't know how to ...
2
votes
1answer
17 views

Cannot set documentclass size parameter

I am using LaTeX to write a report, my header is : \documentclass[12pt]{extreport} %packages \usepackage[francais]{babel} \usepackage[utf8]{inputenc} ...
1
vote
1answer
15 views

Change ToC to \section instead of \chapter

I'm using the report class, and because of this, my table of contents is also displayed as a chapter (i.e. using a chapter heading for "Contents"). This is overly large, and just causes my ToC to wrap ...
1
vote
0answers
30 views

Getting minted and LyX work together

I need to insert code in my report, so I decided to use minted with LyX, my usual editor. I found a solution for getting minted and LyX together in this post (pwaller answer), by adding a custom ...
2
votes
1answer
37 views

LaTeX report - table of contents without chapter

I am trying to write a LaTeX report (using class report) but I don't want to use chapters, only sections, subsections and subsub. Using \renewcommand{\thesection}{\arabic{section}}, my sections ...
1
vote
1answer
63 views

How to read \vartheta and vocally distinguish it from \theta? [closed]

I am going to vocally report my paper. I have used both $\vartheta$ and $\theta$ in the equations. How should I read $\vartheta$ and vocally distinguish it from $\theta$.
0
votes
0answers
27 views

Conflict of backrefalt for bibliographies at end of each chapter (using natbib and chapterbib)

I want to have the bibliographies at end of each chapter and still have the cross-reference on the reference list stating "Cited on pages:" using natbib and chapterbib packages. To compile the ...
0
votes
0answers
37 views

LaTeX read permission

I am currently writing my master's dissertation in LaTeX on a mac (using texmaker). I have created a LaTeX document with a main file and linked each chapter to the main file using \input{chapter}. ...
1
vote
2answers
48 views

How to test whether report has been called with “draft” option

How can I test within a document, whether or not the initial \documentclass[a4paper,11pt,twoside,fleqn,draft]{report} includes the "draft" option? My naive attempt \newif\ifmydraft \mydraftfalse ...
3
votes
0answers
55 views

Remove page-breaks after chapters in the report class?

So I am using the report class, and every time I try to create a new \chapter it creates it on a new blank page with just the title. I have tried using \usepackage{etoolbox} but I keep getting Latex ...
4
votes
1answer
23 views

list of figures numbering

I'm looking to include the "part" number in the list of figures numbering. Here is what my List of Figures looks like now: I wish instead that each element would show I.1.1 Caption for Figure 1.1 ...
0
votes
1answer
18 views

List of Figures adds vertical space with new Part

I'm trying to remove the vertical space added in the List of Figures when I have new Parts. This is how I'm removing the vertical space when adding new chapters: \usepackage{etoolbox} \makeatletter ...
1
vote
0answers
46 views

Report template for thesis [closed]

I am writing my thesis using the report template. I want to start counting the pages from the first chapter and leave all the presentation pages with no page numbering. I also need to reduce the ...
1
vote
0answers
29 views

Is there any difference in the default text alignment between document classes book, report, article, and so on?

I've come to the question if there are differences in the text alignments regarding the document classes. I'm trying to justify a text in my whole document (report). Reading question I came to the ...
2
votes
1answer
50 views

Unexpected error with report class [closed]

Anyone who knows why it gives me the error Undefined control sequence. \documentclass[12pt]{report} \usepackage[utf8]{inputenc} \usepackage{graphicx} \graphicspath{{images/}} \title{ ...
2
votes
1answer
60 views

Duplicate and modify section hierarchy

In a large thesis style document being prepared, there are certain parts (latex hierarchy \part{}) that are being treated as insertions of previously prepared work. This may include articles or ...
1
vote
0answers
143 views

Is there a way to extract data from a PDF form and use it to generate a report in LaTeX?

I tried to search for this question but failed. I hope it is not a duplicate. I am trying to automate the process of summarizing a long PDF form. I want to extract data from certain fields in a PDF ...
3
votes
1answer
376 views

I want to take a CSV file, process the data, and generate a report file, where can I go to learn how to do this?

I have access to MATLAB for data processing, and TeXstudio for the report. I am familiar with MATLAB about 100x more than LaTeX. The data flow I am trying to create: CSV file is generated with 50 ...
5
votes
1answer
233 views

Set page number in all Chapter start pages with KOMA-Script

I'm using the KOMA-Script to define my headings and I would like to show only the page number in the chapter start pages. I got this by creating a new style and using it with ...
2
votes
2answers
53 views

Bookmarks to the second part leads to the wrong page (page of the first part)

The bookmark/link in PDF to the second part ("Quels impacts ?") leads to the wrong page (one early). This is also true for the ToC in the PDF (the page number here is correct, just the hyperlink is ...
2
votes
1answer
99 views

Bookmarks linked to incorrect page

I have a document that looks exactly like I want but the bookmarks link to the wrong spot. This MWE is long because if I hacked it down too much I couldn't replicate the issue. Unfortunately, I ...
2
votes
1answer
130 views

Footnotes misbehaving in report go to front page but behave correctly in other report

I wonder if anyone can advise me as to what is wrong? I have a LaTeX report where I referencing the same footnote more than once on a page in the Introduction: documentclass[oneside,11pt]{report} ...
6
votes
2answers
133 views

Is it possible to add text underneath a part's title?

In a LaTeX report I'm working on, I have used \part{title of part} to organise the chapters into parts. This gives me distinct pages for each \part specified which is what I want. But if I try to add ...
1
vote
0answers
35 views

LyX 2.1 Report Class Changing Part to Other Text When Using non-TeX fonts (via XeTeX/LuaTeX) [duplicate]

I am using LyX 2.1 with the document class "Report". I am writing my thesis, which consists of three essays. How do I change word "Part" for each section to "Essay"? I have not been able to find an ...
4
votes
2answers
106 views

Wrapper to enclose several chapters in LaTeX

If I have a document with the order of chapters as follows \documentclass[oneside,11pt]{report} % ... \tableofcontents \listoffigures \listoftables \chapter{Introduction} \chapter{Background} ...
0
votes
0answers
35 views

Creating self notes while preparing a manuscript (Yellow block of text in between the normal text) [duplicate]

I am writing a pretty long report (more than 100 pages) and at times I need to keep track of several things to do in a particular page, or section, or chapter. What I currently do is that I keep a ...
3
votes
1answer
152 views

Report custom format

I'm new to LaTeX and I want create a report for my college. The format specified is as follows: Left Margin – 1.5 inch Right Margin - 0.5 inch Top Margin – 1 inch Bottom Margin – 1 inch ...
3
votes
1answer
91 views

Front page of a report

I've been stuck for hours on this since I'm just a beginner on Latex,can anyone help me build this front page : Much appreciated! Here's what I tried so far : ...
1
vote
0answers
53 views

table of contents and fancyhdr [closed]

I'm using the report class to write my phd. But when I tried the \usepackage[Conny]{fncychap} I have to delete \tableofcontents \listoffigures and \listoftable, otherwise it wouldn't work. ...
2
votes
0answers
33 views

Sections are labeled as 0.x in the output [duplicate]

This is probably a very basic question, but I am new at this. I am using \section{} to create a new section. Latex labels it as 0.1. How can I get it to label it as 1.0? \documentclass{report} ...
1
vote
1answer
403 views

Roman page numbering for abstracts in report class problem

I am writing a document with class report. I want that the first pages i.e. Declaration, Abstract, Acknowledgements, Table of Contents, List of Figures and List of Tables have page numbering roman, ...
2
votes
1answer
278 views

Chapter Style- Report Class

I am looking for different types of chapter style formats for report class document. i like memoir class Veelo chapter style. how to do exactly the same format for report class document class ...
3
votes
2answers
540 views

How to set binding offset in report class

I want to add bigger margin to the left side of document for binding purposes. The default margin with report class is ~1.5 inches, but when I use the geometry to set the bindingoffset, whole layout ...
3
votes
1answer
132 views

Change the margin twice on one page

I am attempting to change the margin on a section of the first page of my report. \documentclass[10pt]{article} \usepackage[left=25.4mm, right=25.4mm, top=12.7mm, bottom=25.4mm]{geometry} ...
5
votes
1answer
45 views

Reducing space before chapter works with english but not with hungarian babel package

I write my thesis recently and I want to reduce the spaces before chapters. I find the solution, but it isn't working for me with \usepackage[magyar]{babel} I use the following codes: ...
6
votes
0answers
40 views

Figures on report counter page (without styling) [duplicate]

Context : I am writing a report with article style in latex and I am wondering if it is possible to have : on right page : my usual text, my full report without figures ; on counter page (left ...
0
votes
0answers
20 views

How to reference an Annex [duplicate]

How to reference an Annex (A)? I've tried \ref{Annex A}, but this wouldn't work.
2
votes
0answers
73 views

Question about suitablity of Latex for university works with strictly specified page layout [closed]

I don't have prior experience with Latex so I'm wondering if it would meet my needs well. So I need to write some reports on my studies in university. Problem is, we don't seem to have Latex template ...
1
vote
1answer
47 views

Can I add a \for field in a report style?

I'm using a report class, which works just fine. On the title page I have listed the author, but I'm doing it for someone else. Like writing a memo, it would be nice to put in a field, something like ...
6
votes
1answer
198 views

Empty pages in the preface section of my thesis

I am writing a thesis and I'd like to use the openright option: \documentclass[letterpaper,12pt,twoside,openright]{report} The problem is that when I use this option, empty pages are placed between ...
4
votes
1answer
552 views

Change chapter title format in scrreprt without titlesec?

I'm working with scrreprt and I have loaded minitoc to have a short TOC after each chapter title. However when I give the \chapter command I get: 1 Chapter Title I'd like to have: Chapter 1 ...
1
vote
0answers
77 views

Latex font not scalable for report class title? [closed]

I'm trying to run the following code in texmaker on Ubuntu Linux \documentclass[12pt,a4paper]{report} \usepackage[utf8]{inputenc} \usepackage{helvet} \usepackage{amsmath} \usepackage{amsfonts} ...
7
votes
1answer
163 views

How can I set footnotes' numbers as superscript in a French report?

How to make footnotes' numbers take this form? Preferable by \renewcommand. Here is what I'm getting using this code: \documentclass[% ,12pt ,french ]{report} \usepackage{babel} ...
3
votes
2answers
1k views

Using fancyhdr in titlepage using Report Class

In the report class I am having trouble getting the header to show up on the title page. From what I understand, the \maketitle command automatically sets the pagestyle to empty. I had tried ...
4
votes
2answers
212 views

What type of .sty or document class will be good for thesis? [closed]

I am writing my thesis but i want to write it with Latex as my University do not have a document class or .sty as i used to see other university. Could any one know the the .sty that has the under ...
1
vote
0answers
385 views

Font messed up in print, but looks good on the screen? [closed]

Okay, so I turned in this assignment a few days ago. It looked great on my machine (and I've had it tested on other machines too) but it looked DREADFUL once I printed it. The fist page, using bookman ...
5
votes
1answer
5k views

Is there an easy way to get the \frontmatter \mainmatter, and \backmatter in a LaTeX report?

I'm writing my thesis using the report class, which does not support the \frontmatter, \mainmatter, or \backmatter commands. However, I really like the idea of having Roman numeral page numbering for ...
4
votes
1answer
473 views

Reproduction of Word Report Template in LaTeX

I am trying to reproduce a word report template in LaTeX to speed up my report writing. I have some basic LaTeX skill, but I am having trouble producing the blue page border as shown in the picture. ...
8
votes
1answer
156 views

Make ltxdoc class use report as underlying class

The ltxdoc class, designed for documenting LaTeX source files, is based on the article class. Beyond a certain threshold, the documentation may need to be divided in chapters and another class, e.g. ...
8
votes
1answer
488 views

Show chapter name in fancyhdr when no section is available

The following code shows only section names in the headers. \documentclass[12pt,a4paper,oneside]{report} \usepackage{fancyhdr} \usepackage{lipsum} \pagestyle{fancy} \fancyhf{} ...