One of the standard {document-classes}, and one of the simplest to contain the {sectioning} command {chapter}; similar to {book}.

learn more… | top users | synonyms

1
vote
2answers
24 views

Suppressing in the word “Chapter N” from header, documentclass: report

I want to suppress the word "Chapter n" from my header. I want to have only the chapter title in the header e.g. "Introduction" not as "Chapter 1. Introduction" The document class is report. Here is ...
2
votes
1answer
27 views

Continuous numbering of theorems in report

I have a report class document with sections and chapters: \documentclass[a4paper,12pt]{report} And I need to add theorems \newtheorem{theorem}{Theorem} under chapters \begin{theorem} Let $f$ be a ...
2
votes
1answer
31 views

how add bibliography to a LYX report

I'm writing my report using LYX . I have to integrate bibliography reference. I would know if there is a package to add.
1
vote
0answers
18 views

display figures on LYX [duplicate]

Am using Lyx to write report. I have to add some figures. But when compiling my file all the figuers are displayed on the top of the page. Any help is appreciated.
1
vote
0answers
28 views

The sections of my document aren't being numbered properly [duplicate]

I have to write my report in latex, and I'm using a sharelatex template to write it. The particular template I'm using is this Norwegian University of Science and technology template ...
1
vote
0answers
59 views

Unwanted empty page in front of the document

i'm working on my master's thesis, and have this problem with an empty page at the start of the document. I'm using TexMaker and use a "headdocument" where i put the preamble with include files. The ...
1
vote
1answer
57 views

Remove automatic page break after paragraph

i'm using the report class and have set the section depth to 5 using the following command: \setcounter{secnumdepth}{5} However, when I use the \paragraph{} section, the compiled pdf adds a page ...
3
votes
2answers
39 views

When I use the \begin{thebibliography} command, I get it as a chapter. How can I get rid of that?

I want to include a reference list at the end of my report, but when I use the command \begin{thebibliography}, I get a heading which says "Chapter 1". Here is an example: ...
11
votes
2answers
31k views

Custom title page in report or book class?

I have a long academic report to write and I am thinking of using the book class or the report class? However in both these classes the title page has the title in the centre. I want to make my own ...
1
vote
1answer
37 views

How do I fix wrong numbering when using afterpage in appendix?

So I'm writing my thesis and was in need of a table in landscape mode as it was too big, and found a simple solution at How to place a table on a new page with landscape orientation without clearing ...
4
votes
1answer
33 views

How to place the caption of an image under the image self in a Report documentclass

How can i make it so that the caption ends under the image? \documentclass[12pt]{report} \usepackage{graphicx} \begin{document} \begin{figure}[h!] \includegraphics[scale= 0.3]{images/MRS.jpg} ...
3
votes
0answers
36 views

Set a caption under an image in Report documentclass

I've been working on a report but i can't seem to find out how to get the caption of a image UNDER the specific image, instead it stays at the top of the image. Heres my code: ...
1
vote
2answers
56 views

How can I make this header like in the image? And how can I reuse it easily on multiple pages?

Does anybody know how I can make this header in LaTex? I want it like it is in the image. Is it somehow possible to reuse it easily? I wanted to use it for multiple homework assignments and tasks ...
3
votes
1answer
151 views

LaTeX Report Template for Windows PdfTeX

I am very novice in LaTeX and would like to make similar documents (template) like the one referenced in the LaTeX template here. I would like to place the header, footer as in the similar fashion ...
1
vote
1answer
54 views

Bold incorrectly applied to Table of Contents

I am using the report class in TeXworks/MiKTeX and was provided with a style that is a little out of date. I am having trouble with a bold section format being transferred from a page into my Table of ...
3
votes
1answer
93 views

Roman numbers in abstract of report class

I want to add roman page numbering to all the pages up to the end of the table of contents, apart from the title page. So I did the following, which works, apart from the fact that the abstract does ...
1
vote
1answer
20 views

Custom short citation merging author-title-volume to one single field

How can I make a custom short citation merging the fields of author-title-volume to a custom field such as "MRCLC 61:130" instead of "Matuz, Contemporary Literary Criticism, 130." I need this in view ...
6
votes
1answer
35 views

Multiple references to same footnotes in memoir with cleveref and french babel

I'm trying to have multiple references to a footnotes, in a class memoir (or report) and using [french]babel and cleveref. According to this question Multiple references to the same footnote with ...
2
votes
1answer
52 views

Report Table of contents layers

I have a \subsubsection in the table of contents (ToC). It is layered correctly in the table, however for some reason the section number doesn't appear. Every other section appears fine. Any ideas ? ...
1
vote
1answer
212 views

ERROR: You can't use a prefix with `\begingroup'

Here is a minimal example of a document which does not compile. \documentclass{report} \usepackage[francais]{babel} \usepackage{expl3} \usepackage{appendix} \usepackage{multicol} ...
1
vote
1answer
95 views

Need urgently assistance in LaTeX - unable to change the document class without totally blowing my thesis

First of all I'm a beginner in LaTeX, of course I used it for writing short articles but never for a thesis... For This reason (now I think it was stupid) I looked for a sample of a thesis and I was ...
0
votes
0answers
28 views

Help, how would I create a report with this as a preamble? Link in desc

I need to create this report with size 11pt arial font. It needs to include an image at the top, a title in the middle and an area for a line or two of information. ...
4
votes
3answers
91 views

Epigraph and fancyhdr: a patching problem

I would like to add epigraphs on my part pages using epigraph, but since I also use fancyhdr, I cannot get the proper page style on the part page using the solution given in the package documentation. ...
0
votes
1answer
52 views

BibLaTeX bibliography not displayed at all [duplicate]

I have a lot of problems with the bibliography. I read the BibLaTeX manual but I couldn't find a way to fix it. Here is the source: \documentclass[]{report} \usepackage[latin1]{inputenc} ...
0
votes
0answers
14 views

Binding margin on Report double sided document [duplicate]

I'm writing a double sided report document. Exporting the PDF I will obtain a larger margin on the right for the odd pages, as usually encountered in books. But I would obtain a centred double sided ...
1
vote
0answers
142 views

Linking Maple outputs to Latex [closed]

I'm doing a report in latex on matrices and matrix exponentials and have used maple to work out some results and do some checks. I need to show these results in my report on Latex,is there anyway I ...
0
votes
1answer
41 views

How to create a double-side printable report?

I am using this code (\documentclass[12pt, twoside]{report}) to make my thesis able to print in double-side. I assume it should create some blank pages to have the chapters always in the right. But it ...
2
votes
1answer
68 views

I am trying to assemble my thesis but I am having troubles

I have started assembling my thesis, and ran up into problems while assembling it. My chapters and appendices are in folder called "Chapters". Here is my main file: \documentclass[12, ...
3
votes
1answer
46 views

Paragraph numbering not showing when paragraph begins a page

I've made this code to number paragraphs for easy reference, but if a paragraph "normally starts" in a new page that paragraph number goes out of the scope of the page. The numbering works fine if a ...
1
vote
1answer
44 views

Table positioning won't do what I want

I want to write a report Portfolio (Berichtsheft in german) with LaTeX. There has to be a table where I can write in what I did everyday, split up in work hours. And under that two fields where we can ...
0
votes
0answers
20 views

Contents are not clickable for navigation in Report file [duplicate]

I have preparing a report. The items in the table of contents are not clickable in the pdf file and hence, I cannot go to a chapter directly from the table of contents page. My Code: ...
0
votes
0answers
26 views

Edit the leftmark command [duplicate]

I want to edit the \leftmark so it just displays the number and the title of the chapter. I have shown a minimal example of my document below. Instead of “Chapter 1. The first chapter”, I just want ...
1
vote
1answer
72 views

How to set space in the Title

i want to set the space between the title lines \newcommand{\reporttitle}{ this is a title with a lot of text bla bla bla} i used \usepackage{setspace} \setstretch{2} but nothing happens ...
1
vote
0answers
16 views

How to write a good report with LateX [duplicate]

this is my first post on tex exchange , i am using latex for the first time for my internship report . I read that lateX is very useful and professionnal especially for writing equation . I've found a ...
0
votes
1answer
639 views

LaTeX Error: There's no line here to end. with \maketitle

I'm begginer in Latex and I get this error when I compile my file LaTeX Error: There's no line here to end. following is the code that I used : \documentclass[12pt,a4paper]{article} ...
0
votes
1answer
137 views

Rotating page incl. footers

I am trying to rotate a page in my thesis. I have now spend time by reading other questions about the same answer. I found this in preamble: \usepackage{pdflscape} And this in the thesis, where I ...
9
votes
2answers
4k views

List of Symbols?

I'm trying to make a list of symbols that looks a lot like the one shown here But I'm having some trouble making 2 columns that are spaced in that manner for the 2 pages I have for my list. Can ...
4
votes
1answer
468 views

Combining report and apa6 class for a dissertation

I am a complete newcomer to LaTeX. Here is what I am attempting to do - combine a thesis template (made with the report class) with a template based on the apa6 class. In other words, I need the ...
2
votes
1answer
81 views

How to keep Appendix (as is) in TOC but have heading capitalized in report

I am using report and I need to have chapter headings be in all caps (including the Appendix) but not in the TOC. E.g. instead of "Appendix A", it should appear as "APPENDIX A" inside the paper and ...
2
votes
1answer
180 views

Section Titles in Margin Notes

I am struggling to reproduce the following layout in Latex. I have tried using the package marginnote, and playing around with geometry and fancyhdr. I end up going around and around in circles, ...
0
votes
2answers
261 views

Font size of Chapter number and Chapter Title [duplicate]

As in the picture below I want to change the font size of Chapter number "Chapter 1" and title "Introduction" separately. Is there any way I can do that. I have used the package sectsty but it changed ...
2
votes
0answers
140 views

How can I insert the abstract, acknowledgment, and contribution sections in Roman numerals?

I am assembling my thesis in biochemistry. It's the first time that I am using latex. I am quite happy and proud that I learned how to use it (basics). Thank you to the community for helping me (and ...
1
vote
0answers
87 views

The bibliography is not working [closed]

I am looking at videos on how to assemble a thesis. I am converting my endnote database into references.bib. Here is my code: \documentclass[12, twoside]{report} \usepackage{graphicx} ...
1
vote
1answer
212 views

Appendix A instead of Chapter 1

\documentclass[12pt]{report} \usepackage{graphicx} \usepackage{sectsty} \usepackage[inner=4cm,outer=2cm]{geometry} \usepackage{mathptmx} \renewcommand{\rmdefault}{ptm} \graphicspath{{images/}} ...
0
votes
1answer
87 views

Redefining \chapter*, \section* and \subsection*

My problem is this one: I'm creating a LaTeX template for reports, my goal is to make a .tex file that is the simplest possible. I use a .cls file, where I'd like to redefine \chapter* (and so on), ...
1
vote
1answer
73 views

Delete Chapter, section etc.. titles from pdf body only include them in TOC

I want chapter, section, subsections in TOC but I do not want them in the pdf body as 1 title occupies entire page. I have already put the chapter names, section names etc in headers. So the only task ...
1
vote
1answer
123 views

Chapter formatting and spacing

I use report document class and the thing is that I would like to change the chapter both in format, letterspace and place on the page. Right now a chapter look like this: I want it to look like ...
0
votes
4answers
383 views

Vertical line in the middle of the page

How can I get a vertical line in the middle of the page ? and I want also to write same text in the right and the left of the vertical bar (like this example) : I tried \rule but i don't know how to ...
2
votes
1answer
75 views

Cannot set documentclass size parameter

I am using LaTeX to write a report, my header is : \documentclass[12pt]{extreport} %packages \usepackage[francais]{babel} \usepackage[utf8]{inputenc} ...
1
vote
1answer
92 views

Change ToC to \section instead of \chapter

I'm using the report class, and because of this, my table of contents is also displayed as a chapter (i.e. using a chapter heading for "Contents"). This is overly large, and just causes my ToC to wrap ...