REVTeX (latest version 4.1) is a document class and a set of packages designed for the preparations of manuscripts to the journals of the American Physical Society (APS) and American Institute of Physics (AIP).

learn more… | top users | synonyms

6
votes
1answer
115 views

Problem in revtex4-1 when a footnote ends with an equation

RevTeX4-1 automatically ensures that a period appears at the end of each footnote (or endnote). In most circumstances this causes no difficulty. But when an endnote ends with an equation, RevTeX ...
3
votes
1answer
189 views

How do I use REVTeX?

This seems like a really stupid question, but I am confused. I am LaTeX-ing papers for a professor, but APS requires the REVTeX format. Is it as simple as \documentclass{revtex4-1}, and remains as a ...
1
vote
0answers
114 views

Footnotes in REVTeX after `\onecolumngrid`

I have a two-column paper that uses revtex4-1 class, which is followed by a single-column supplementary material. I use \onecolumngrid to switch to the single-column mode, but unfortunately this seems ...
1
vote
0answers
50 views

To have bibliography of Revtex along the text in two-columns

I am thinking about having a heading for References, since I think it is needed in publications. My minimum tex \documentclass[twocolumn]{revtex4-1} \usepackage{newunicodechar} ...
1
vote
1answer
909 views

To have abstract in the document class revtex?

I had to change my document class to revtex4-1 to be able to have \widetext parameter for one of my equation, discussion about implementation. However, the abstract \begin{abstract}...\end{abstract} ...
5
votes
1answer
800 views

Caption automatically centered in a REVTeX document

I'm recently writing an APS paper with REVTeX and encountered a problem. The captions in all figure and table floats are automatically centered instead of being fully justified. I tried \captionsetup ...
6
votes
0answers
134 views

lscape rotates the whole document

I have been struggling with this for a couple of hours: Including the package lscape immediately rotates the whole document. I have no clue why it happens. The document is very simple: ...
2
votes
1answer
662 views

LYX- Change title of “Acknowledgments” in LYX

In Lyx, section Acknowledgments, I need to change the title displayed as "Acknowledgements" in the pdf. How can I do that ?
1
vote
0answers
77 views

Showing bibtex article entry “number” with revtex

I am using revtex4-1 and BibTeX to create a bibliography. Most entries in my bib file shows up fine, but I am having troubles with two journals, Cosmology and astroparticle physics and Living Reviews ...
1
vote
1answer
386 views

Problem in bibliography when using revtex4-1 class for publication in AIP

I am trying to create a manuscript by using revtex4-1 class. I am using MikTeX 2.9 on Windows 7 x64. This manuscript is for publication in Physics of Fluids. The following is a MWE. ...
3
votes
2answers
902 views

Color with gnuplot generated TikZ file not working (other TikZ has color)

I have generated a tikz .tex file from gnuplot and I am attempting to simply \include{mytikzfile} in my main .tex file, which uses the revtex4-1 document class. Upon compiling I get a number of errors ...
1
vote
1answer
165 views

same fontsize in plot in revtex document as text

I am making a figure in PSTricks for a RevTeX document. A MWE of my figure is the following \documentclass{article}[28pt] \usepackage{pstricks, pst-node, pst-plot, pst-circ} \usepackage{moredefs} ...
7
votes
2answers
241 views

How can I use accents (like \"{o}) in \footnote?

I get following error when I use in my tex file \footnote{Shr\"{o}dinger}. When I change to \footnote{Shrodinger} there is no error. Can you give me an advice what should I do? I use BiBTeX for ...
1
vote
1answer
162 views

Renaming date in revtex4

I found the similar question and answer for renaming some of the keywords, but they were for revtex4-1. Since my document is giving me strange errors when I'm using revtex4-1, and not when I'm using ...
0
votes
0answers
18 views

Removing “And” in Revtex 4.1 author list [duplicate]

I am submitting an abstract using a LaTeX template. The template makes use of RevTex 4.1 and it includes an example abstract. In this example, the numbers that show the author affiliation are ...
4
votes
1answer
57 views

pageskip when loading text from external file

I have the following MWE, using REVTeX: \documentclass[aps, prl, twocolumn]{revtex4-1} \begin{document} \title{Title} \author{Dog} \date{\today} \begin{abstract} ...
2
votes
0answers
440 views

Breaking long links in bibliography using REVTeX and Bibtex [closed]

I'm writing an article using the REVTeX documentclass, and use hyperref. The problem is that when I add URLs to my references, the linked titles aren't broken at all. Minimal example: .tex file: ...
3
votes
3answers
301 views

REVTEX 4.1 and PeerX-Press LaTeX workflow

I am having trouble finding a practical workflow for REVTEX 4.1 documents to be uploaded using the AIP PeerX-press system. The PeerX system only accepts images in EPS and TIFF format. My native ...
4
votes
1answer
163 views

revtex incompatible with dblfloatfix?

This minimal example makes my latex/pdflatex from MiKTeX (or TeX Live of a colleague) crash: \documentclass{revtex4-1} \usepackage{dblfloatfix} \begin{document} Hello World! \begin{figure} ...
1
vote
0answers
118 views

Multiple footnotes break revtex4-1 [closed]

I am observing the same behavior that occurred in a previous question. However, I have been able to figure out what is the problem: basically, using multiple footnotes causes the () to appear. For ...
1
vote
1answer
254 views

Creating title page in revtex with twocolumn layout

I'm trying to create a separate title page for a report in revtex. This works fine if I have single column layout however I want the report to be in two column format. When I have this even including ...
2
votes
1answer
58 views

Is it possible to apply commands to specific pages (the first page)

Tricky question (for me at least!) I am using revtex which allows you to switch between a one and two column environment using the \onecolumngrid and \twocolumngrid commands. I would like my first ...
3
votes
2answers
385 views

Warning Message

I was wonder why I receive the following message. Warning line 1 No Society specified, using generic APS style. Here is my code: \documentclass[apl, aps4, twocolumn, superscriptaddress]{revtex4} ...
2
votes
1answer
587 views

REVTeX bibliography author initals

I am trying to get my bibliography in a REVTeX4.1 document to print out: Smith, PJ as the author instead of Peter John Smith (which of course is horrible if you're searching for ...
2
votes
1answer
327 views

\chapter command in REVTeX 4.1

I'm currently writing my Bachelor's thesis in LaTeX using the REVTeX 4.1 document class (revtex4-1 package). I am using this package because of the clear citation style and nice figure caption layout. ...
2
votes
1answer
2k views

\newpage stays in right column

I am using RevTEX 4.1 with the following parameters: \documentclass[aps,prb,reprint]{revtex4-1} This gives a two-column layout with a balanced two-column bibliography at the end. I would like to ...
1
vote
1answer
261 views

revtex4-1 and colortbl doesn't fill cells

The MWE below shows that the \cellcolor command doesn't properly fill a table cell in revtex4-1 where it would do so in a simple article. Can anyone help me get fills that extend to the boundaries of ...
4
votes
0answers
379 views

Revtex4-1 with prl option doesn't show email address [closed]

I have a strange problem. I'm running latest MacTeX on Mountain Lion 10.8.2. When I compose an article using revtex4-1 with prl as document class option, it doesn't display my email address while if I ...
2
votes
1answer
1k views

Shared author footnotes in REVTeX

REVTeX automatically combines \email and \thanks macros into a single footnote, and uses the same footnote if multiple authors share the exact same set of macros. Is there any way to force the \email ...
4
votes
1answer
7k views

How to get APS BibTeX style file to work

I just started to use BibTeX and have found it amazingly convenient. So far I have tried to use the style file h-physrev.bst from arXiv, and copied the BibTeX information directly from the site of ...
4
votes
2answers
1k views

Modifying contents of maketitle

I am attempting to get a LaTeX style to match a journal's specification (PDF) I have used a revtex document style with a number of tweaks, and I've gotten things close the desired output, but I'm ...
3
votes
1answer
2k views

What's the least dangerous way to upgrade revtex and natbib on Ubuntu?

The version of revtex4-1 that ships with Ubuntu 12.04 LTS is buggy. The latest version of revtex requires the latest version of natbib, newer than what comes with Ubuntu. What's the correct way to ...
1
vote
0answers
319 views

Fitting equation inside a column [closed]

I am using twocolumn revtex mode, and for my matrix to fit inside the column I used this 'trick' \begin{equation} \resizebox{1.\hsize}{!}{ \bordermatrix{~ & \tau & r & \theta & ...
9
votes
2answers
952 views

Revtex - using math in footnote

How one can use mathematics in footnote using ReVteX? I have a particular problem with \rangle Minimal Example: \documentclass[aps,amsmath,amssymb, prl]{revtex4-1} \begin{document} ...
2
votes
1answer
469 views

Numbering in revtex4

I use revtex for my paper, and the sections are numbered as I. II. (roman), but when I use \numberwithin{equation}{section}, I get sth like (I.1), but I'd like it to be like (1.1), I looked around but ...
3
votes
4answers
5k views

Numbering sections

I want my sections, subsections and subsubsections in revtex to be marked by arabic numbers and 1.1., 1.1.1. etc. Instead I'm having roman numbers and letters. Can somebody help me?
4
votes
1answer
3k views

Footnote in revtex4

Can somebody explain to me how to make a footnote in revtex4, so that it is placed on the same page as text and not in the bibliography?
2
votes
1answer
496 views

Revtex 4.1 using superscript and square bracket style of citation in the same article

I am preparing an manuscript for an AIP journal and using Revtex 4.1. By default AIP uses superscript citation style. However, sometimes I'd like to use square-bracket style in the text when ...
0
votes
0answers
13 views

I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type a “1” after her name? [duplicate]

Possible Duplicate: Simple Author, affiliation and email example fails in RevTex4-1 I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type ...
8
votes
2answers
338 views

Revtex's tensor macro interferes with nested amsmath split and align environments

I've encountered a strange collision between RevTeX and AMSLaTeX. If I nest a split environment inside an align environment, it works as it should, but then the next time I use the RevTeX \tensor{} ...
4
votes
1answer
1k views

modification of Revtex 4.1 bibliography style [closed]

I'm using the book class along with apsrev4-1 bibliographystyle. Everything is fine except from the fact that I'd like titles of the papers that I cite to be visible (not a standard thing in apsrev4-1 ...
1
vote
1answer
273 views

revtex-4.1 no bibliography

I have exactly the same problem as: Trouble generating bibliography in LaTeX using Revtex 4, but there is no solution :// Does someone know how to solve it? My os is gentoo-linux, I have installed ...
5
votes
1answer
2k views

Revtex warning with bibtex

I get a warning every time I run bibtex on files using revtex4-1. The warning is Warning--jnrlst (dependency: not reversed) set 1 This even happens with files revtex supplies as examples, but I've ...
2
votes
1answer
215 views

automatic truncate author list in revtex4-1 [closed]

I have a problem about using revtex4-1. This version does not automatically truncate long author lists anymore. So I followed the instruction I found here, I made an new .bst file through makebst and ...
6
votes
2answers
644 views

Wrong cross-reference format for sections using revtex4-1

I am producing a document using the revtex4-1 document class, in which the sections should appear as, for example I.A.1. To achieve this, I've simply added the following lines to the preamble: ...
4
votes
2answers
3k views

Revtex4-1 and algorithm2e indentation clash

there seems to exists a clash between revtex4-1 and the algorithm2e package. Whenever I try to insert an algorithm block when using the revtex4-1 document class, the tabulation is not working ...
1
vote
0answers
310 views

Footnote Labels [closed]

I am new to using LaTeX/TeX (not sure what the difference is) and I am trying to add a footnote. The actual footnote appears alright with a number [1] in front of the text of the footnote itself. ...
7
votes
1answer
1k views

How can I change my Bibliography to enumerate the supplemental references like [S1], [S2],…,instead of [1],[2],

I'm writing a scientific paper, using \documentclass[aps,prl,...]{revtex4-1} with supplemental Material. The Supplemental Material is an extra tex file and I want that the references there to be ...
2
votes
1answer
192 views

Getting email address as endnote in LyX revtex document

I'm having trouble getting the author email address to appear as an endnote -- marked with a letter -- in a LyX revtex document. Instead, it's showing up as a footnote. Here's a .lyx document and an ...
1
vote
1answer
2k views

Some styles work in Lyx's BibTeX Generated Bibliography, others don't

Some styles work correctly for Lyx's BibTeX Generated Bibliography, others give errors. For example, if I set the style to IEEEtran, then all is well. However, if I set it to apsrev, I get output ...