REVTeX (latest version 4.1) is a document class and a set of packages designed for the preparations of manuscripts to the journals of the American Physical Society (APS) and American Institute of Physics (AIP).

learn more… | top users | synonyms

2
votes
1answer
398 views

REVTeX bibliography author initals

I am trying to get my bibliography in a REVTeX4.1 document to print out: Smith, PJ as the author instead of Peter John Smith (which of course is horrible if you're searching for ...
2
votes
1answer
252 views

\chapter command in REVTeX 4.1

I'm currently writing my Bachelor's thesis in LaTeX using the REVTeX 4.1 document class (revtex4-1 package). I am using this package because of the clear citation style and nice figure caption layout. ...
2
votes
1answer
1k views

\newpage stays in right column

I am using RevTEX 4.1 with the following parameters: \documentclass[aps,prb,reprint]{revtex4-1} This gives a two-column layout with a balanced two-column bibliography at the end. I would like to ...
1
vote
1answer
186 views

revtex4-1 and colortbl doesn't fill cells

The MWE below shows that the \cellcolor command doesn't properly fill a table cell in revtex4-1 where it would do so in a simple article. Can anyone help me get fills that extend to the boundaries of ...
3
votes
0answers
244 views

Revtex4-1 with prl option doesn't show email address [closed]

I have a strange problem. I'm running latest MacTeX on Mountain Lion 10.8.2. When I compose an article using revtex4-1 with prl as document class option, it doesn't display my email address while if I ...
2
votes
1answer
691 views

Shared author footnotes in REVTeX

REVTeX automatically combines \email and \thanks macros into a single footnote, and uses the same footnote if multiple authors share the exact same set of macros. Is there any way to force the \email ...
4
votes
1answer
3k views

How to get APS BibTeX style file to work

I just started to use BibTeX and have found it amazingly convenient. So far I have tried to use the style file h-physrev.bst from arXiv, and copied the BibTeX information directly from the site of ...
4
votes
2answers
629 views

Modifying contents of maketitle

I am attempting to get a LaTeX style to match a journal's specification (PDF) I have used a revtex document style with a number of tweaks, and I've gotten things close the desired output, but I'm ...
3
votes
1answer
1k views

What's the least dangerous way to upgrade revtex and natbib on Ubuntu?

The version of revtex4-1 that ships with Ubuntu 12.04 LTS is buggy. The latest version of revtex requires the latest version of natbib, newer than what comes with Ubuntu. What's the correct way to ...
9
votes
2answers
625 views

Revtex - using math in footnote

How one can use mathematics in footnote using ReVteX? I have a particular problem with \rangle Minimal Example: \documentclass[aps,amsmath,amssymb, prl]{revtex4-1} \begin{document} ...
2
votes
1answer
286 views

Numbering in revtex4

I use revtex for my paper, and the sections are numbered as I. II. (roman), but when I use \numberwithin{equation}{section}, I get sth like (I.1), but I'd like it to be like (1.1), I looked around but ...
3
votes
4answers
4k views

Numbering sections

I want my sections, subsections and subsubsections in revtex to be marked by arabic numbers and 1.1., 1.1.1. etc. Instead I'm having roman numbers and letters. Can somebody help me?
3
votes
1answer
2k views

Footnote in revtex4

Can somebody explain to me how to make a footnote in revtex4, so that it is placed on the same page as text and not in the bibliography?
2
votes
1answer
391 views

Revtex 4.1 using superscript and square bracket style of citation in the same article

I am preparing an manuscript for an AIP journal and using Revtex 4.1. By default AIP uses superscript citation style. However, sometimes I'd like to use square-bracket style in the text when ...
0
votes
0answers
12 views

I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type a “1” after her name? [duplicate]

Possible Duplicate: Simple Author, affiliation and email example fails in RevTex4-1 I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type ...
8
votes
2answers
289 views

Revtex's tensor macro interferes with nested amsmath split and align environments

I've encountered a strange collision between RevTeX and AMSLaTeX. If I nest a split environment inside an align environment, it works as it should, but then the next time I use the RevTeX \tensor{} ...
4
votes
1answer
783 views

modification of Revtex 4.1 bibliography style [closed]

I'm using the book class along with apsrev4-1 bibliographystyle. Everything is fine except from the fact that I'd like titles of the papers that I cite to be visible (not a standard thing in apsrev4-1 ...
1
vote
1answer
226 views

revtex-4.1 no bibliography

I have exactly the same problem as: Trouble generating bibliography in LaTeX using Revtex 4, but there is no solution :// Does someone know how to solve it? My os is gentoo-linux, I have installed ...
5
votes
1answer
2k views

Revtex warning with bibtex

I get a warning every time I run bibtex on files using revtex4-1. The warning is Warning--jnrlst (dependency: not reversed) set 1 This even happens with files revtex supplies as examples, but I've ...
2
votes
1answer
182 views

automatic truncate author list in revtex4-1 [closed]

I have a problem about using revtex4-1. This version does not automatically truncate long author lists anymore. So I followed the instruction I found here, I made an new .bst file through makebst and ...
5
votes
2answers
488 views

Wrong cross-reference format for sections using revtex4-1

I am producing a document using the revtex4-1 document class, in which the sections should appear as, for example I.A.1. To achieve this, I've simply added the following lines to the preamble: ...
4
votes
2answers
2k views

Revtex4-1 and algorithm2e indentation clash

there seems to exists a clash between revtex4-1 and the algorithm2e package. Whenever I try to insert an algorithm block when using the revtex4-1 document class, the tabulation is not working ...
1
vote
0answers
255 views

Footnote Labels [closed]

I am new to using LaTeX/TeX (not sure what the difference is) and I am trying to add a footnote. The actual footnote appears alright with a number [1] in front of the text of the footnote itself. ...
6
votes
1answer
839 views

How can I change my Bibliography to enumerate the supplemental references like [S1], [S2],…,instead of [1],[2],

I'm writing a scientific paper, using \documentclass[aps,prl,...]{revtex4-1} with supplemental Material. The Supplemental Material is an extra tex file and I want that the references there to be ...
2
votes
1answer
174 views

Getting email address as endnote in LyX revtex document

I'm having trouble getting the author email address to appear as an endnote -- marked with a letter -- in a LyX revtex document. Instead, it's showing up as a footnote. Here's a .lyx document and an ...
1
vote
1answer
1k views

Some styles work in Lyx's BibTeX Generated Bibliography, others don't

Some styles work correctly for Lyx's BibTeX Generated Bibliography, others give errors. For example, if I set the style to IEEEtran, then all is well. However, if I set it to apsrev, I get output ...
0
votes
1answer
628 views

REVTEX author affiliation

Good morning I am triing to use RevTex to write an article to APS. I use this code for author affiliation. \documentclass[aps]{revtex4-1} \begin{document} \title{A title} \author{Author A} ...
0
votes
1answer
896 views

Error when using REVTeX 4.1

I've tried to upgrade to REVTeX 4.1 but am getting compile error even with the simplest document: \documentclass{revtex4-1} \filelist \begin{document} test \end{document} produces: ...snip... ! ...
2
votes
2answers
583 views

Can't list bilibliography in order cited using ReVTeX 4.1

The journal I am submitting to requires the bibliography be listed in the order cited in the text. How can I do this with ReVTeX? I have tried different journal styles but can't get it to work. ...
5
votes
1answer
322 views

How to retain the double-column formatting of the previous page after \clearpage?

I'd like to have some additional material after a paper, starting on a new page. For this purpose I'm using \clearpage or \cleardoublepage (\newpage doesn't work the way I want). Unfortunately, while ...
3
votes
1answer
2k views

Explicit line spacing in revtex 4

I am required to use 13pt line spacing for a report and want to use revtex 4 as document class. However, I am not able to set the line spacing explicitly.
3
votes
2answers
306 views

using combine class with revtex4-1 - command \published already defined

I'm trying to combine (with combine class) many (about 100) TeX files to prepare a book of abstracts for a conference. They are written using revtex4-1 class. When I use this classes together ...
3
votes
2answers
3k views

REVTeX4-1 biblography problems

My co-author and me have decided to send a paper to the Journal of Mathematical Physics which is a publication of American Institute of Physics. Being a junior co-author I got the dirty job of ...
3
votes
2answers
279 views

Cross-referencing within text

Is there a way to reference a place in the text using \hyperref, instead of using \nameref to reference the section that portion of text belongs to? Probably a WME will help in getting my point ...
0
votes
1answer
129 views

Apparent Instability in REVTeX4 After Adding xpatch Package

This is a follow-up question to How can Acrobat features be controlled from within LaTeX? It seems that xpatch package makes REVTeX unstable and even appears to turn off some of its features. Thus, ...
4
votes
2answers
246 views

How can Acrobat features be controlled from within LaTeX?

I needed to install the package xpatch which fixes a glitch in revtex4 regarding cross-referencing. However, now, every time I compile a LaTeX file the produced PDF document has the annoying sideband ...
6
votes
1answer
462 views

\nameref only shows reference as a red rectangle, no name in it

I'm trying to use \usepackage{hyperref} to reference in the text a section by name. The section to be referenced is \section{whatever}\label{sec:marker} However, when I place in the text ...
2
votes
1answer
761 views

preprint REVTeX 4.1 moves the body on the second page

This is a follow-up to single-column revtex4-1 adds a page break after the title section I was looking to make the body come right after the abstract. But the solution posted there (insert the option ...
0
votes
0answers
310 views

Kile and Ubuntu 11.10 AND RevTeX [duplicate]

Possible Duplicate: How can I manually install a LaTeX package (Debian/Ubuntu Linux)? I just downloaded RevTeX for a PRL paper that I propose to write. However, after unzipping the contents ...
5
votes
1answer
580 views

Changing “Contents” name in revtex4-1

I need to change the way "Contents" appears in \tableofcontents in a revtex4-1 document. Other answers indicate \renewcommand{\contentsname}{changes!}, however when I uncomment any of those in ...
3
votes
1answer
1k views

REVTeX affiliations without superscripts

I tried searching for this, but wasn't turning up anything. Maybe I missed something. I have multiple authors, all with the same affiliations. Is there a way I can get REVTeX to suppress ...
6
votes
1answer
1k views

Problem with \tableofcontents in revtex4-1

While I was answering List of Figures/Tables - eliminate dots? I found some strange behaviour; this document: \documentclass[aps,pra,reprint]{revtex4-1} \begin{document} \listoffigures ...
8
votes
2answers
2k views

List of Figures/Tables - eliminate dots?

I need to eliminate the dots that appear in \listoffigures and \listoftables results - is there an easy way to do that? EDIT: I think I need to actually eliminate the dots. Modifying @dotsep via ...
11
votes
1answer
2k views

Is it possible to load biblatex with a class that has already loaded natbib?

A while ago I asked a meta question on how big a question can be. I was wondering in particular about breaking open REVTeX and reorganising the goo within to replace the natbib bits with bits that ...
2
votes
1answer
562 views

Can I include an article (revtex4) inside a book-class latex document?

I would like to include in an Appendix of my thesis some articles written, and I would like to do so in the original style which is revtex-prl. The thesis is written as a book. Can I actually do ...
3
votes
1answer
684 views

\tableofcontents and multiple files from \include

I am trying to compile a table of contents with \tableofcontents{} from multiple files I have included (with \include, i.e. chapters). What do I need to do to get the chapters included in the table ...
4
votes
1answer
1k views

How is the longbibliography option used in revtex?

I would like my bibliography to display article titles. The documentation says to use the longbibliography option, but it won't compile, so obviously I am doing something wrong. My doc looks like ...
2
votes
1answer
3k views

Simple Author, affiliation and email example fails in RevTex4-1

I can't get the following simple author / email / affiliation code to function perfectly in a document for Journal of Mathematical Physics (JMP): \documentclass[aip,jmp,preprint]{revtex4-1} ... ...
4
votes
1answer
956 views

REVTeX 4.1 + fixltx2e + includegraphics = doesn't work?

I use MacOSX Leopard and TeXShop. This piece of code works: \documentclass[preprint,floatfix]{revtex4-1} \usepackage{graphicx} \begin{document} \title{empty} \section{fixltx2e or REVTeX 4.1 problem ...
15
votes
2answers
11k views

One column equation in twocolumn document class

I am writing a paper (revtex4-1, reprint documentclass which I believe uses twocolumn) and need to have a long equation that needs to break the two column format. I've seen answers to this question ...