REVTeX (latest version 4.1) is a document class and a set of packages designed for the preparations of manuscripts to the journals of the American Physical Society (APS) and American Institute of Physics (AIP).

learn more… | top users | synonyms

1
vote
1answer
280 views

revtex-4.1 no bibliography

I have exactly the same problem as: Trouble generating bibliography in LaTeX using Revtex 4, but there is no solution :// Does someone know how to solve it? My os is gentoo-linux, I have installed ...
1
vote
3answers
3k views

widetext equation in revtex4 messed up

I have stumbled upon a problem. I have a seminar I'm working on, and I'm writing it in revtex4 two column mode. I already used one widetext environment and the equation came out nicely. So I ...
1
vote
2answers
326 views

How to align section heading left with revtex4-1

I am using revtex4-1 and section headings are aligned in the center. How do I modify this?
1
vote
2answers
261 views

Change option of natbib in AIP

I really want to have my references generated with BibTeX like [1], [2] instead of 1, 2 in the AIP class which uses revtex4-1.cls. I guess I need to change the super option of the package natbib. I ...
1
vote
1answer
1k views

To have abstract in the document class revtex?

I had to change my document class to revtex4-1 to be able to have \widetext parameter for one of my equation, discussion about implementation. However, the abstract \begin{abstract}...\end{abstract} ...
1
vote
1answer
274 views

Creating title page in revtex with twocolumn layout

I'm trying to create a separate title page for a report in revtex. This works fine if I have single column layout however I want the report to be in two column format. When I have this even including ...
1
vote
1answer
2k views

Warning Message Using Revtex4 in Preamble

I was wondering what was the cause of the following warning! message with the documentclass below: Using the following: \documentclass[amssymb,twocolumn]{revtex4} WARNING MESSAGE BELOW Class ...
1
vote
2answers
1k views

revtex4 left and right margins are not the same

I seem to have a problem with margins. I'm using revtex4 (4-1 messes up my references, but that's not the point). The preambule is this: \documentclass[twocolumn,prc,floats,amsmath,amssymb]{revtex4} ...
1
vote
1answer
29 views

Section references in RevTex 4.1

How does one reference sections in RevTex4.1? I've tried \section{\label{sec:Coupling}Coupling Efficiency} \section{Coupling Efficiency\label{sec:Coupling}} \section{Coupling ...
1
vote
1answer
95 views

How to reduce spacing between figure and text

I want to reduce spacing between figure and text (not caption) and between paragraphs. I'm using revtex4 package (two column style).
1
vote
1answer
117 views

How to get a J. Appl. Phys. like bibliography with scrreprt document class?

J. Appl. Phys. like bibliography can be generated by using revtex4-1 document class with jap option and aipnum4-1 bibliographystyle. But how can I get that J. Appl. Phys. like bibliography with ...
1
vote
1answer
107 views

chapterbib package not working on revtex4

I am trying to create two separate bibliographies for my article, one for the main part and another for the supplementary part of an article using chapterbib package. The below is my minimum working ...
1
vote
1answer
425 views

Problem in bibliography when using revtex4-1 class for publication in AIP

I am trying to create a manuscript by using revtex4-1 class. I am using MikTeX 2.9 on Windows 7 x64. This manuscript is for publication in Physics of Fluids. The following is a MWE. ...
1
vote
1answer
168 views

same fontsize in plot in revtex document as text

I am making a figure in PSTricks for a RevTeX document. A MWE of my figure is the following \documentclass{article}[28pt] \usepackage{pstricks, pst-node, pst-plot, pst-circ} \usepackage{moredefs} ...
1
vote
1answer
470 views

How to position wide figures in two column documents

I want to an image at the bottom of a page in a two column document. Using figure* causes the image to jump to the bottom of the document. Is there a way to avoid this? Here is an example: ...
1
vote
0answers
15 views

How to create indentation before the figure index of a caption

I need to include subfigures in my file with documentclass {revtex4-1}. As the caption package is incompatible with the class, I used \usepackage[caption=false]{subfig}, but then the problem is that ...
1
vote
1answer
47 views

how to remove “Eds” after authors name in bibtex

I have no idea why LaTeX insistently puts "eds." after authors name in the bib file. I simply use the following bibliography : @PREAMBLE{ "\providecommand{\noopsort}[1]{}" # ...
1
vote
0answers
47 views

Correct way of writing math expressions in text (Revtex)

Up to now, I have been writing small mathematical expressions in a Latex/Revtex paragraph like that: ..., so this is where $a$ is the dominant parameter. However, in my latest paper, all ...
1
vote
0answers
41 views

Multiple references on one line of bibliography in LyX 2.0 with revtex4-1

The documentclass revtex4-1 allows multiple citations to appear on the same line in the bibliography. This is accomplished by adding a star next to the citation key [1]: \cite{bethe, *feynman, ...
1
vote
0answers
85 views

algorithm2e with RevTex

Note: I have seen the previous answer to this problem here and it doesn't work for my purposes. I suspect that others are in the same boat. I'm writing a paper for which the publisher requires the ...
1
vote
0answers
58 views

RevTeX strange behaviour. (Possible bug???)

I'm using the class revtex4-1 to write a paper, and it has a very strange behaviour. Let me show you In the above there is no problem, everything looks perfect. However, when I keep writing the ...
1
vote
0answers
59 views

Bibliography in Revtex not only show Journal but also arxiv source

One of my bibtex entries contains both journal field and eprint field like: @ARTICLE{ journal = {Nature}, archiveprefix = {arXiv}, eprint = {1105.1234} } I found Revtex4.1 format the ...
1
vote
0answers
1k views

LaTeX Compilation Problem: revtex4-1.cls Not Found [closed]

I'm using TeXmaker with MikTeX2.9 on Windows 7. Recently I've installed revtex4-1 according to the instructions in the README file. However when I tried to compile the sample .tex file using ...
1
vote
0answers
248 views

epstopdf creating blank .pdf file -eps-converted-to.pdf file [closed]

I am a newbie trying to use the most recent pdfLaTeX. Whenever I try to add an eps file to my document epstopdf just creates a blank .pdf file and I just see blank space where there should be my ...
1
vote
0answers
355 views

apsrev4-1 bibliography style: only show the starting page

See the following MWE: \documentclass[secnumarabic,amssymb, nobibnotes, aps, pre, twocolumn]{revtex4-1} \newcommand{\revtex}{REV\TeX\ } \newcommand{\classoption}[1]{\texttt{#1}} ...
1
vote
0answers
65 views

revtex incompatible with stfloats?

Very similar to this one: revtex incompatible with dblfloatfix? Is revtex known to be incompatible with stfloats? In this MWE, the second figure is just gone (with a "Float cannot be placed" ...
1
vote
0answers
118 views

Footnotes in REVTeX after `\onecolumngrid`

I have a two-column paper that uses revtex4-1 class, which is followed by a single-column supplementary material. I use \onecolumngrid to switch to the single-column mode, but unfortunately this seems ...
1
vote
0answers
51 views

To have bibliography of Revtex along the text in two-columns

I am thinking about having a heading for References, since I think it is needed in publications. My minimum tex \documentclass[twocolumn]{revtex4-1} \usepackage{newunicodechar} ...
1
vote
0answers
80 views

Showing bibtex article entry “number” with revtex

I am using revtex4-1 and BibTeX to create a bibliography. Most entries in my bib file shows up fine, but I am having troubles with two journals, Cosmology and astroparticle physics and Living Reviews ...
1
vote
0answers
120 views

Multiple footnotes break revtex4-1 [closed]

I am observing the same behavior that occurred in a previous question. However, I have been able to figure out what is the problem: basically, using multiple footnotes causes the () to appear. For ...
1
vote
0answers
330 views

Fitting equation inside a column [closed]

I am using twocolumn revtex mode, and for my matrix to fit inside the column I used this 'trick' \begin{equation} \resizebox{1.\hsize}{!}{ \bordermatrix{~ & \tau & r & \theta & ...
1
vote
0answers
315 views

Footnote Labels [closed]

I am new to using LaTeX/TeX (not sure what the difference is) and I am trying to add a footnote. The actual footnote appears alright with a number [1] in front of the text of the footnote itself. ...
1
vote
1answer
2k views

Some styles work in Lyx's BibTeX Generated Bibliography, others don't

Some styles work correctly for Lyx's BibTeX Generated Bibliography, others give errors. For example, if I set the style to IEEEtran, then all is well. However, if I set it to apsrev, I get output ...
1
vote
1answer
22 views

tableofcontents depth in revtex4-1

The revtex style files override the usual tocdepth command, so it has no effect. From a previous post I learned how to DECREASE the tocdepth: For instance, \makeatletter \def\l@subsubsection#1#2{} ...
0
votes
1answer
132 views

Apparent Instability in REVTeX4 After Adding xpatch Package

This is a follow-up question to How can Acrobat features be controlled from within LaTeX? It seems that xpatch package makes REVTeX unstable and even appears to turn off some of its features. Thus, ...
0
votes
1answer
982 views

REVTEX author affiliation

Good morning I am triing to use RevTex to write an article to APS. I use this code for author affiliation. \documentclass[aps]{revtex4-1} \begin{document} \title{A title} \author{Author A} ...
0
votes
1answer
1k views

Error when using REVTeX 4.1

I've tried to upgrade to REVTeX 4.1 but am getting compile error even with the simplest document: \documentclass{revtex4-1} \filelist \begin{document} test \end{document} produces: ...snip... ! ...
0
votes
1answer
299 views

revtex reporting underfull hbox at every newline

So I'm working on a seminar, and I was wondering, why revtex, every time I make newline after a paragraph (\), reports underfull hbox warning? I mean, everything looks fine once in pdf (I would expect ...
0
votes
1answer
28 views

Appendices in REVTeX 4.1 [closed]

How does one get into appendix mode when using the \prl option in the documentclass? According to the instructions you put \appendix into the code and everything following is treated as an appendix. ...
0
votes
0answers
63 views

onlinecite natbib for REVTeX not working

Is there simple reason why \onlinecite{} could not be working? The specific problem is when I use \cite{} I get the citation as a numerical value. Such as superscript 1 for the first citation. But ...
0
votes
0answers
28 views

Switch a vertical Letter size frame to a horizontal Letter size frame at a specific page

Is there a way to change a vertical Letter size frame to a horizontal Letter size frame in the revtex4? I have a huge figure which suits better in a horizontal Letter size frame. For example, in ...
0
votes
0answers
149 views

How do I write a Physical Review or APS paper in lyx?

I am using RevTex 4.1 Document class in Lyx to write an APS paper. I do not find an option to enter Author or Abstract without the words 'Abstract' and 'Author' appearing. Also, when I convert to pdf, ...
0
votes
1answer
105 views

TOC line spacing using Revtex

I am trying to change the linespacing in my table of contents (using revtex4-1) but with no luck. My Preamble: \documentclass[aps,prd,amsmath,amssymb,a4paper,nofootinbib,12pt]{revtex4-1} ...
0
votes
0answers
93 views

revtex 4.1 in aps style: section numbers do not show up in typeset text

Typesetting using Revtex 4-1 and Texlive gave me this problem: The source fragment is \documentclass[12pt,aps,prl,showpacs,showkeys,preprintnumbers]{revtex4-1} \usepackage{graphicx} ...
0
votes
0answers
125 views

Revtex generating corrupt .bib file

I am trying to write a report using RevTeX to format my document. Here is a MWE: \documentclass{revtex4-1} \begin{document} Some text \cite{article} \bibliography{bibliography} \end{document} This ...
0
votes
0answers
11 views

Modifying apsrev.bst file? [duplicate]

I would like that my references for which I use apsrev show the title of the article. I've found here apsrev-title.bst file that should allow me to do so. But this doesn't work :\ I've downloaded ...
0
votes
0answers
1k views

Problems with deluxetable

I'm currently using revtex4 as the document class and I'm trying to use deluxetable here as well, but deluxetable is not working. I've added it to root and refreshed the database so the .sty is found. ...
0
votes
0answers
18 views

Removing “And” in Revtex 4.1 author list [duplicate]

I am submitting an abstract using a LaTeX template. The template makes use of RevTex 4.1 and it includes an example abstract. In this example, the numbers that show the author affiliation are ...
0
votes
0answers
13 views

I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type a “1” after her name? [duplicate]

Possible Duplicate: Simple Author, affiliation and email example fails in RevTex4-1 I am using revtex for APS and the first author does not have an affiliation. How do I get it to not type ...
0
votes
0answers
310 views

Kile and Ubuntu 11.10 AND RevTeX [duplicate]

Possible Duplicate: How can I manually install a LaTeX package (Debian/Ubuntu Linux)? I just downloaded RevTeX for a PRL paper that I propose to write. However, after unzipping the contents ...