{roman-numerals} is about dealing with, processing and generating roman style numerals.

learn more… | top users | synonyms

3
votes
2answers
229 views

ALL CAPITAL Roman Numeral Chapter Style. How?

Question revised: What must I do to make "Chapter 1" display as "CHAPTER I", "Chapter 2" as "CHAPTER II", and so forth? Background and details: This is a requirement for my thesis. I've searched a ...
2
votes
1answer
36 views

In LyX, how to change section headings from Arabic to Roman

I'm relatively new to LyX. I'm writing an article and would need to change the numbering of sections from Arabic to Roman. Would anyone know how to do this? (e.g. by means of ERT?) Also, the ...
4
votes
0answers
68 views

Format \ref as a roman numeral? Strange bug [closed]

How do I get a \ref to format as a Roman numeral? At the moment I have the code: \newcommand{\appendixref}[1]{Appendix~\romannumeral 0\ref{#1}\relax} This works great... except for when it ...
2
votes
1answer
77 views

Using the nth package for Roman Numerals

\documentclass{book} \usepackage{nth} \begin{document} \nth{3} is not the same as $\nth{3}$ \end{document} This code works fine for numbers.Now , In the argument if I want to pass III , what should ...
3
votes
2answers
68 views

Enumerate package wont allow to change format

I have a [journal]{IEEEtran} document (I just don't want to change the document type). I have had lots of problems, like: I cannot manage to enumerate even pages to the left and odd pages to the ...
4
votes
1answer
682 views

Roman numerals in sans serif fonts

Inspired by a question, that unfortunately has been deleted by the OP after getting some hints from me in a comment. Lacking serifs the Roman numerals in sans serif fonts look sometimes a bit ...
4
votes
1answer
168 views

Lower-case roman numerals in enumerate with Spanish babel

I want to use lower-case roman numerals in a list, and I used: %Redefine the first level \renewcommand{\theenumi}{\Roman{enumi})} \renewcommand{\labelenumi}{\theenumi} %Redefine the second level ...
8
votes
1answer
197 views

Subbibliography with roman numbers and Biblatex

I am currently working on a thesis, where I have to use one subbibliography. This works pretty well with Biblatex and keywords. Now my faculty wants to have this subbibliography (and only this) to be ...
2
votes
1answer
171 views

classicthesis part numerals TOC vs. in text

My question is similar to this one this one. I use classicthesis and have the problem that a) when I don't redefine \thepart, I get lower case (instead of uppercase) roman numerals in the TOC ...
3
votes
3answers
264 views

How to obtain “correct” Roman Numerals in ToC

I'm currently writing my second thesis template for LyX 2.0.6 under MiKTeX 2.9, and since I'm using the article document class I have to manually organize the page numbering inside the ToC, LoF, LoT ...
2
votes
1answer
215 views

Roman page numbers in appendix in Lyx

I use LyX 2.0.5.1 I have a report with several chapters and 2 appendices. I have roman page numbering before chapter 1 (for table of contents, table of figures, etc) and I have arabic page numbering ...
3
votes
1answer
271 views

Wrong roman numbering in toc

I have two types on numbering, roman for toc tof and tables and arabic for the document. I'm using \usepackage[hidelinks]{hyperref} \usepackage{bookmark} and the code is written this way. ...
3
votes
1answer
171 views

How to obtain formatted page number in ConTeXt?

Problem The \pagenumber macro does not reflect the conversion attribute value within the context of front matter vs. body matter. The front matter uses Roman numerals, the body matter uses regular ...
5
votes
1answer
343 views

Toptesi class and sequential page numbering

I'm working on a final dissertation and I've been using the toptesi class provided by our university. The problem is that I wanted to manually add the glossaries package. Now, whilst I managed to ...
3
votes
2answers
96 views

Pagenumbering with romanbar compatible to hyperref

Is there a good way to use the package romanbar also for page numbering, with compatibility to hyperref? The following example works without hyperref but not with it. ...
4
votes
1answer
194 views

How to use roman numerals for backup slides on beamer?

I'm making a LaTeX presentation using beamer, and I'd like to prepare some slides for possible questions I can be asked for. I find how to ignore slides numbering in this post, but I don't like the ...
1
vote
0answers
189 views

Problem with roman/arabic numerals [closed]

I have a problem with abstract numbering. I have this chapter ahead of the table of contents together with the acknowledgements. The toc, list of tables/figures, acknowledgements are all numbered ...
0
votes
1answer
229 views

Roman numbers on annexes

I'd like to have roman numbered annexes like this: 1 First Section 2 Second Section 3 Final Section Bibliography Annexes I First Annex II Second Annex III Third Annex IV Fourth Annex I'm ...
4
votes
1answer
169 views

Page numbers (Roman number and Arabic numerals) in ConTeXt

My simple document is divided into only two parts (it's only some math notes). \starttext % frontmatter \startstandardmakeup ... % the cover \stopstandardmakeup \completecontent \startbodymatter ... ...
3
votes
1answer
295 views

Change theorem numbering from Roman to Arabic

I am trying to number my theorems according to section number. I use the following in the preamble, which works: \newtheorem{theorem}{Theorem}[section] However, since my section is numbered as ...
2
votes
1answer
167 views

Page numbers in Romannumeral in ConTeXt

I tried to change the page number into Romannumeral with \setuppagenumbering[conversion=romannumerals] but it did nothing. I had to use a macro to achieve that: ...
0
votes
0answers
34 views

Figure numbers appearing wrongly within the text [duplicate]

I am new to Latex and I am facing a lot of problems with Figure numbers. They appear correctly next to the figure in Arabic numericals. But when I refer to any figure within the text, it shows a wrong ...
5
votes
1answer
209 views

Resuming in enumerate with roman numerals

I want to suspend and resume an enumerated list, with Roman numerals. I am using the enumerate and mdwlist packages and have the following: \begin{enumerate}[I] \item Item \item Item ...
3
votes
2answers
218 views

Excluding the number that appears before sections and using roman numbers in table of content

Whenever I have \section{something} a number appears before it, like 1.Something How can I exclude this number? And for table of content, I have something like \setcounter{tocdepth} ...
2
votes
1answer
127 views

roman numbering for few sections [closed]

I have some attachments in my document and I would like to number them with a roman style. How can I do this? I tried: \documentclass[12pt,a4paper,oneside]{book} \begin{document} ...
6
votes
4answers
5k views

Typesetting Roman numerals within LaTeX text

I want to typeset real Roman numerals (both uppercase and lowercase) in LaTeX text. I've checked out a previous thread but found no satisfactory solution. (In fact, several solutions mentioned in that ...
10
votes
1answer
339 views

How to separate Roman numerals for a range of numbers?

Arabic numerals are separated using en-dash: pages 101--123, 2--3 and so on What is typographically correct way to separate Roman numerals? For example: with en-dash in the XIX--XX centuries ...
4
votes
1answer
415 views

How to display Arabic numerals with \ref but Roman numerals otherwise?

To show all chapter numbers as Roman numerals, I’m using \renewcommand\thechapter{\Roman{chapter}} The fourth chapter, for instance, is therefore “Chapter IV” everywhere. Is it possible to show ...
7
votes
1answer
176 views

How do I get a chapter \ref in counting numbers when the ToC uses Roman numerals?

My university's formatting requirements for theses require Roman numerals for chapters in the table of contents (e.g. "Chapter II ..... Lions"), but for references to chapters within the text, ...
7
votes
1answer
362 views

Using ligatures from libertine for roman numerals in pdftex

I am using the Linux Libertine font through the libertine-legacy package with pdftex. This font contains nice ligatures for roman numerals, e.g., \LibertineGlyph{tworoman} gives ii. Now I want to use ...
0
votes
1answer
170 views

How to get Roman line numbering in algorithmicx? What is the counter name?

I try to get Roman numbering but couldn't find how to change it in the package documentation. After some research, I figured out how to do it using the algorithm2e package. (Use algonl as optional ...
6
votes
1answer
760 views

Roman Number Symbols

I am looking for a latex package which supports roman number symbols. Particularly alternative / ancient roman symbols should be included in this package. To be more precise, I currently need a ...
6
votes
2answers
702 views

Align the roman numbers of the parts in ToC

How can I align the roman numbers of the parts in this manner? The alternative is to use an arabic enumeration. I would not any changes at the TOC of classicthesis outside of the alignment of the ...
6
votes
2answers
555 views

Roman chapter numbers cause overfull hbox in titletoc-ToC

Overfull hbox in ToC after chapter numbers changed to Roman; see MWE below. With the tocloft package \setlength\cftchapternumwidth{3em} solves the problem. But: Is there any solution to the problem ...
3
votes
1answer
253 views

Roman numerals appear in toc but not in document

I'm writing a thesis and sections are required to have roman numerals in both the toc and the document itself. The pertinent document code looks like this: \documentclass[twoside,12pt]{report} ...
11
votes
1answer
2k views

Roman Page Numbering for TOC in Article

I'm writing something with the article class, and I'd like to have the table of contents pages numbered with roman numerals, and in addition and most importantly: to have the arabic numbers reset ...
5
votes
2answers
3k views

Roman numbering, cleardoublepage and table of content not working

I'm currently doing the thesis report and I cant seem to get the numbering to work as well as the along with some other stuff. What I want is Abstract(eng) Abstract(swe) and Acknowledgments to all be ...
1
vote
0answers
828 views

pagenumbering{Roman} doesn't work [closed]

I have a document I want to number in uppercase-Roman letters only. If I add \pagenumbering{Roman} to the document, I get the error message "Missing number, treated as zero", and the page ...
3
votes
1answer
457 views

Numbering for a theorem and enumerated list within that theorem

I have the following amsthm environment defined \newtheorem{cslist}{Comparative Static Hypothesis} In instances of cslist, I would like to have an enumerated list like this. ...
18
votes
3answers
2k views

Using unicode Roman numerals in XeTeX

As mentioned in How can I get Roman numerals in text?, there are several ways in which one can add Roman numerals to text in TeX. However, these solutions all seem to use three I's to make a roman ...
7
votes
2answers
608 views

Page numbering with a mixed Roman numeral-Arabic numeral format

How can I create page numbers with a mixed Roman numeral-Arabic numeral (<Roman numeral>.<Arabic numeral>) format? They increment as: "I.1", "I.2", "I.3", etc. The Roman numerals change ...
13
votes
1answer
1k views

Centre roman numbers in enumerate environment

I have an enumerated list that uses roman numbers. \documentclass{article} \usepackage{enumitem} \begin{document} \begin{enumerate}[label=\roman*] \item first entry \item second entry ...
5
votes
1answer
577 views

Problem with hyperref's pagebackref, modroman and thebibliography

Following @yiannis-lazarides comment here, I decided to use the modroman package for my frontmatters. In my actual project I don't have that many references, and thus decided to use the ...
11
votes
2answers
385 views

Middle age roman numerals formatting

I've recently read about a middle age variation on roman numerals where the last "i" character is replaced by a "j". I was thinking about writing my own \roman and \Roman variations, but hit a stone ...
13
votes
3answers
15k views

Roman numeral page numbering

I am writing a thesis that contains an abstract and acknowledgements page, but need to number the page numbers using Roman numerals. How would I do this? I don't want to include the title page but ...
23
votes
1answer
3k views

Roman numerals with over- and underline

This question led to a new package: romanbar (using a variation of egreg's code, and stating this in the manual; the package isn't really new now, sorry for the delayed announcement) I have ...
19
votes
5answers
31k views

How can I get Roman numerals in text?

For example: Charles's sister Bona, married the eldest son of Philip VI of France, the future John II of France, in 1335. How can I get Roman numerals?
2
votes
1answer
450 views

Varying style for chapter-references

I would like to refer to a chapter (roman numbering) partly with arabic numerals (e.g. as part of equation numbers) and partly with roman numerals (e.g. when refering directly to the chapter) ... ...
6
votes
2answers
987 views

Uppercase pagenumbering (roman) using \frontmatter

I am using \frontmatter, \mainmatter and \backmatter so my pagenumbering is correct. However, i would like my roman pagenumbering in \frontmatter to be uppercase. Is there any easy way to do so? ps: ...
3
votes
2answers
393 views

Using roman numerals for \volcite in BibLaTeX

I would like to submit an article to a journal that requires all references to volumes to appear in roman numerals before the page reference, e.g.: William Shakespeare, Complete Works, III, 25. For ...