{sans-serif} fonts are those that do not have the small projecting features called "serifs" at the end of strokes.

learn more… | top users | synonyms

3
votes
2answers
25 views

Forcing algorithm2e to typeset using Times New Roman

I am writing a book using a sans serif font, and I have a need for typesetting pseudocode. The pseudocode, however, is typeset with sans serif font as well, yet I need the Times New Roman for that ...
0
votes
1answer
76 views

Sans-serif font in siunitx does not work with \electronmass

As default font, I want to have a serif font (MinionPro in my case). But for figure and table captions I like to use a sans-serif font (MyriadPro in my case). If I want to give a mass in electron ...
6
votes
2answers
170 views

Decimal point in sans serif font

For some reason, when I use \mathsf{}, the decimal point doesn't seem to be affected: \documentclass{article} \begin{document} \textsf{This is an example.} $ \mathsf{\frac{1}{2} = 0.5} $ The rest of ...
0
votes
1answer
31 views

Sans-serif references in captions

I use a serif font for my document (koma-script document class scrbook) but a sans-serif font for captions. If I reference, e.g. an equation, within my caption, this number is printed in serif, not ...
2
votes
1answer
45 views

Switch between sans and sans-serif math with MyriadPro and MinionPro

I have a document using MinionPro as serif and MyriadPro as sans-serif font families. Math is set by default with the serif font but for captions I like to switch to the sans-serif font. A minimal ...
3
votes
0answers
30 views

Conflict between siunitx and sansmath?

I use the following preamble to get a sans serif font in my docs: \usepackage{lmodern} \renewcommand*\familydefault{\sfdefault} \usepackage[T1]{fontenc} The siunitx package works well with this, ...
2
votes
1answer
38 views

How to change the sans serif font used by IEEEtran document class

The sans serif fonts used by article and IEEEtran document classes clearly differ. Below are two MWEs and corresponding outputs. \documentclass[10pt]{article} \begin{document} \textsf{The quick ...
4
votes
1answer
41 views

\textasteriskcentered invisible with [garamond]{mathdesign}

Please try this MWE: \documentclass{article} \usepackage[garamond]{mathdesign} \usepackage{roboto} % or another sans serif font, e.g. the cabin package \usepackage{blindtext} \begin{document} Centred ...
2
votes
1answer
33 views

\sffamily does not show Greek characters

I have been trying to generate a timetable for my weekly schedule via a GNU SF template that I've found. As I'm Greek, I wanted the text in the schedule to be in Greek. The template I use is Pascal ...
2
votes
0answers
32 views

\usepackage[T1]{fontenc} with \textsf: strange phenomenon [duplicate]

I have some trouble using \usepackage[T1]{fontenc}: \textsf text is no longer sans-serif. For instance, {\Huge\textsf{\bfseries SOME TEXT some text}} becomes instead of the usual I suppose ...
1
vote
0answers
62 views

Using a sans serif text font with XITS math [closed]

I'm working with a Macintosh and am looking for a clear, readable sans serif font which would be vaguely compatible with XITS Math. I've tried Helvetica Sans, but am finding the the x-height to ...
3
votes
0answers
135 views

Is there any sans-serif font that fully supports unicode-math?

As stated in the question title, is there any sans-serif font that fully supports the unicode-math package? Alternatively, is there a list that shows the different levels of support for (preferably ...
1
vote
3answers
83 views

How can one obtain true sans serif for the numeral 1?

For the numeral 1, neither \textsf nor \mathsf provide true sans serif; there is always a pedestal. How can 1 be typeset in true sans serif?
2
votes
1answer
29 views

In FoilTeX, with sans serif font, \emph gives serif font

I'm using the foils class. I'd like all the text to be serif, so I added \renewcommand{\familydefault}{\rmdefault} to the preamble. However, when I use \emph{}, it displays italicised SANS serif! ...
2
votes
2answers
89 views

Change the sans serif math font

I would like to change the sans serif math font to, say, Kurier, while keeping the roman font as the default. In other words, I'd like to change the font that is used with \mathsf whithout affecting ...
7
votes
1answer
293 views

How to have Helvetica or helvet font with lualatex having similar look as with pdflatex?

Continuing the migration to lualatex, how to have the same aspect for sans serif fonts in lualatex as with pdflatex ? Is there something I haven't install or is it the wrong commands ? ...
1
vote
1answer
338 views

fontspec – sans-serif as main font?

fontspec defines the commands \setmainfont[font features]{font name} \setsansfont[font features]{font name} \setmonofont[font features]{font name} to set the document's default fonts. However, if I ...
7
votes
3answers
356 views

Sans-serif partial derivative symbol?

How can I typeset a partial derivative symbol (∂) in an upright, sans-serif font? I am using pdfLaTeX. I know this problem could be solved easily by switching to another engine — and feel free to ...
4
votes
2answers
134 views

Redefine \textbf to always be sans serif

As the title says, is there any way to make bold text automatically also be typeset in sans serif? I'm thinking something along the lines of \renewcommand{\bfdefault}{???} I don't know what to ...
2
votes
0answers
38 views

problem using subscripts with sansmath

I have had to (hastily) adapt some Latex to sans serif and I have had some small problems. I cobbled a preamble together (lifting some stuff from the web) which seems to work, except for some small ...
1
vote
0answers
136 views

Sans-Serif and Monospace font matching Gentium (pdflatex) [closed]

Since I could not find a typography / font SX I figure this question might be suited best here (also I want to use the fonts for a LaTeX document). I find the Gentium font visually attractive and I ...
2
votes
1answer
270 views

CMBright for math and Iwona for text?

Is there a way to load packages Iwona and CMBright so that Iwona is used only for text, CMBright only for math, and all text and math is sans-serif? The only command I've thought of so far are: ...
0
votes
2answers
126 views

One alphabet in a different font

I wanted a sans serif font in Latex, where the capital I looks different than the small l. I came across droid font, which is nice but too wide and takes up too much space. Currently, I am using ...
1
vote
2answers
204 views

How to combine another sans-serif math font with helvet for text?

The existing question Typeset WHOLE document in sans-serif, Including Math Mode uses the sansmath package to use helvet glyphs also in math-mode. But being not designed for use in math mode, the ...
4
votes
1answer
230 views

Replace several letters in math font

I need to typeset a whole document sans serif with sourcesanspro, including formulas. I know that there are a lot of arguments against doing this, but in this particular case it makes sense. My ...
0
votes
1answer
484 views

Set default sans serif font in XeLaTeX

How can I set the default sans serif font to the default in this example in XeLaTeX? I can only get Helvetica with \documentclass{article} \usepackage[a4paper,margin=5pt]{geometry} ...
7
votes
2answers
330 views

Using sans font for tick labels in pgfplots

I am using a sans font for my figures. Hence I also want the tick labels of the pgfplots to be in sans. The tick labels, however, are set in a math enviroment. So changing the text font does not ...
4
votes
1answer
296 views

Changing Number Font Into Sans Serif

I want to use Libertine Sans Serif numbers (only numbers) in math font. Can i get this result using a command like this: \DeclareSymbolFont{numbers}{T1}{libertine}{m}{n} ...
7
votes
2answers
207 views

How to make ellipsis work with sans serif font?

Problem/question It seems that the ellipsis package does not work with sans-serif fonts. Is it a known problem or maybe not a problem at all? This question follows this one, about "how to change the ...
6
votes
1answer
194 views

Choosing sans-serif font, without changing anything else

How do I make Arev the font for the sans-serif family, but nothing else? I tried using \usepackage{arev} \usepackage[T1]{fontenc} as instructed on this page, but that made everything sans-serif. I ...
7
votes
1answer
369 views

Typeset WHOLE document in sans-serif, Including Math Mode

The reigning answer for the Simplest way to typeset entire document in sans serif (Helvetica) completely disregards math-mode. This might be preferred when all math equations are set display style, ...
2
votes
1answer
244 views

Custom typeface for sans serif in math mode

How to set custom typeface for sans serif in math mode for pdfLaTeX? Background: I use \usepackage[bitstream-charter]{mathdesign} which does not provide sans serif font, CM-super is used instead for ...
0
votes
1answer
97 views

Issue with \bar accent and fontspec

Consider the following MWE: \documentclass[png,border=2pt]{standalone} \usepackage[no-math]{fontspec} \usepackage{sfmath} \begin{document} $\bar 1$ $\vec 1$ \end{document} This produces in ...
5
votes
2answers
206 views

Removing gap above “Chapter X” introduces problems with the text formatting

I am trying to get the page layout of my thesis sorted out. I am using fancyhdr to give me the page number in the top right and chapter name in the top left with a horizontal rule under, and sectsty ...
6
votes
1answer
720 views

Package “comicsans”: How to prevent setting of default fonts [duplicate]

I'm using the comicsans package and I noticed that it automatically changes a lot of default fonts to comics. I was wondering if there is some command to restore everything to the default fonts? ...
6
votes
2answers
190 views

Reference to subequation forces serif font; how to work around?

I'm using the subequations environment in a book in which some text is in sans serif font. When I have a reference to a subequation, the reference comes out in a serif font, even if the surrounding ...
4
votes
1answer
90 views

Different font for all headings

I am new to LaTeX and I am trying to use an Arial-like font for all the standard text but a different Sans-Serif font for all the headings. Can somebody please put me in the right direction or an ...
4
votes
1answer
1k views

Roman numerals in sans serif fonts

Inspired by a question, that unfortunately has been deleted by the OP after getting some hints from me in a comment. Lacking serifs the Roman numerals in sans serif fonts look sometimes a bit ...
4
votes
2answers
660 views

Xelatex Calibri without serif math

I have to write a document in Calibri. Please find my minimal example thereafter. The issue is when I include some math, the design looks "ugly". Is there a way to change the serif math font and ...
2
votes
1answer
162 views

Fonts that look alike as text and as math

What fonts give similar look when used as text and within math environment? I'm particularly interested in sans serif fonts, but serif fonts are also very welcomed.
4
votes
1answer
237 views

Package arev and sansmath

I would like to use the package sansmath and be able at the time to define a new symbol \varheart. To define the latter, following this answer, I use the code ...
6
votes
1answer
534 views

How to set font to Serif in Beamer title only

I want to use a serif font for the title in the title slide only. I have tried: \documentclass[12pt]{beamer} \usefonttheme[stillsansserifsmall, stillsansseriftext]{serif} \title{\sc Great title} ...
3
votes
1answer
258 views

Set font weight of \textbf

I am using Source Sans Pro as my main sans serif font, like so: \usepackage[semibold]{sourcesanspro} Using the semibold option works as intended, but it affects all other fonts as well. When I later ...
8
votes
3answers
512 views

How to switch easily between normal font and sans-serif font for maths?

I would like to switch easily to sans-serif font, even for the mathematical symbols. Is it possible? So far is what I have tried : \documentclass{article} ...
1
vote
1answer
263 views

What is your favorite light sans-serif font? [closed]

I am looking for a light (or ultralight) sans-serif fonts for latex. I am only interested in standard ones, those which are installed by default by the TeXLive distribution. Please give one answer ...
4
votes
1answer
1k views

Using Open Sans font with LaTeX: Alphabetic chars right, numeric chars wrong

I've downloaded the Open Sans font from CTAN for use in MiKTeX on Windows (using pdfLaTeX). After the download, I just copied all the files into the MiKTeX root directory (= texmf). As described ...
0
votes
2answers
528 views

Which fonts in images when using URW Palladio, Palatino, etc

I am using the URW Palladio L font in my LaTeX document. For the section headings, as well as the main text. I have many images which include texts. This text is in the sizes between 8pt and 12pt, so ...
5
votes
2answers
373 views

Computer Modern Bright font and blackboard bold symbols

I am trying to match the sans serif math font provided by cmbright with proper blackboard bold symbols (also sans serif). I found that the fourier and stix (xits?) fonts provide such symbols. But how ...
2
votes
1answer
361 views

Using two different Sans Serif fonts eliminates bold font

Say I want to have my document in the default sans serif font, but I occasionally wish to have some other features in the document be in a different font. I am using \usepackage{libertine} to load ...
5
votes
1answer
223 views

How do I make en/em dashes work in Myriad when using it with MinionPro

I'm using MinionPro for the body of a document and Myriad for figure/table captions. Because I can't load packages MinionPro and Myriad at the same time, I load the Myriad fonts for the sans-serif ...