3
votes
1answer
44 views

Remove numbering from `thebibliography` header

So I realize I'm asking for trouble with this question because of its unknown document class, but... I'm using my university's document class for my dissertation (a requirement), and thus it's not a ...
4
votes
1answer
115 views

How to remove the section number from References?

I am using the following for the bibliography part: \bibliographystyle{APA} \bibliography{Bibliography/mybib} and I am getting a section number for the reference part. How can I remove it (I just ...
4
votes
2answers
127 views

How can I enumerate references?

I tried to write a paper for practicing, but I encountered some problems. Namely, Why don't I see references on the table of contents and why the references chapter has number two instead of three and ...
2
votes
1answer
73 views

Changing the heading style of references section

\documentclass[twoside, a4paper, 11pt]{article} \usepackage{natbib} \begin{document} \bibliographystyle{apa-good} \bibliography{bibliography} \end{document} How can I make the section header for ...
1
vote
0answers
65 views

Removing number from bibliography title [closed]

I am using the following commands to rename the title of the bibliography, and I declare the bibliography in this style: \documentclass[11pt,a4paper,twoside,openright]{article} ...
2
votes
0answers
84 views

\renewcommand{\bibheadtitle} not working with hyperref package [closed]

I had a document that properly divided my biblography into three sections with the help of multibib package, and forcing the Biliography Section Titles by means of a \renewcommand{\bibheadtitle}, but ...
1
vote
1answer
65 views

Remove chapter number from Bibliography

MWE: \documentclass[english]{scrreprt} %%% PAGE DIMENSIONS \usepackage{geometry} \geometry{verbose,a4paper,tmargin=3.5cm,bmargin=2.5cm,lmargin=2.6cm,rmargin=2.6cm,headheight=1.3cm,headsep=1cm} ...
0
votes
1answer
69 views

Bibiliography included in ToC but wrong hyperref linking [duplicate]

I included my bibliography in the tableofcontents as follows (documentclass report): \clearpage \addcontentsline{toc}{chapter}{References} \phantomsection \bibliographystyle{IEEEtran} ...
4
votes
1answer
531 views

Numbering Appendices After Bibliography in Backmatter [duplicate]

My graduate school requires the appendices to be after the bibliography but still numbered A,B,C, etc. I'm running into a problem because I am using \backmatter before calling the bibliography but ...
2
votes
1answer
132 views

How can I have list of figure etc. labelled D. List of Figures, E. List of Tables, F. Bibliography…?

I am using KOMA class scrreport and want the following structure of my appendix: A. Abbreviations B. ... C. ... D. List of Figures E. List of Tables F. Bibliography G. Acknowledgments ...
2
votes
2answers
449 views

How can I remove “thebibliography” from the Table of Contents (TOC)?

I want to use a manual Bibliography but I need it as a subsection. In order to do this I did: \documentclass[12pt]{article} \begin{document} \section{My Section} \subsection{References} ...
4
votes
1answer
129 views

Per-section cited and uncited reference list with biblatex

I'm using the example in section 3.11.3: Multiple Bibliographies of the Biblatex Documentation. I want to combine it with this example to get per-section cited and uncited bibliographies. It's not ...
6
votes
1answer
3k views

Omit heading in biblatex with printbibliography

Is it possible to omit the heading when I use the \printbibliography command? I want to print two different bibliographies one after the other and need to add some text between the second heading and ...
2
votes
2answers
160 views

Get next section to put bibliography in TOC

I'd like to show the bibliography in the TOC. This is how far I got: \clearpage \def \nextsection{\thesection + 1} \addcontentsline{toc}{section}{\nextsection Bibliography} \printbibliography ...
5
votes
1answer
93 views

How to get the References section to be numbered as if it were created via \section

I am using the bibtex library to reference. Everything works fine but ideally I would like the reference section generated by bibtex to have the ordered number like \section{} generates. For ...
2
votes
1answer
405 views

Remove heading from bibunit

I'm using bibunit to enter multiple bibliographies in a document. I don't want the bibunit to have a separate heading. I can remove the text with by redefining \refname, but this still leaves big ...
5
votes
1answer
199 views

Section header for references shows wrong number

So I downloaded a nice looking article template which has a custom look for section titles. But now the number next to the References header is the same as that of the last section. How do I fix ...
1
vote
1answer
760 views

titlesec - set top margin for the appendix and bibliography

A while ago I was helped using titlesec to format the chapter title for my thesis. Today a reviewer says that the appendix and the bibliography need 1in top margin. How do I do it? Thanks. ...
1
vote
1answer
431 views

Make “Reference” in Bibliography Smaller / Spacing in Bibliography

I have trouble making my bibliography section smaller. This is important because I am applying for the NSF Graduate Fellowship and they want everything to fit 2 pages. Here is what it looks like right ...
6
votes
1answer
343 views

Wrong section counter for references when using titlesec

Changing the style of my sections using the package titlesec works fine with these lines \usepackage{titlesec} \titleformat{\section}[block]{\large\scshape\centering{\Roman{section}.}}{}{1em}{} but ...
2
votes
1answer
683 views

titlesec and bibliography

I use titlesec to capitalize and display the chapter title at the center. Everything is fine until I get to the bibliography, the word 'bibliography' is not capitalized. Here is an example ...
0
votes
0answers
55 views

Chapters or sections in different files [duplicate]

Possible Duplicate: Keep chapter number of chapters inserted with \include I would like to write down a paper with 4 chapters or sections and I would like to write them in separate files ...
8
votes
2answers
8k views

How to change Bibliography heading?

Let's take article document class with bibliography: \documentclass{article} \begin{document} Some text \cite{key01}. \begin{thebibliography}{9}% 2nd arg is the width of the widest label. ...
5
votes
1answer
653 views

titleformat not being applied to bibliography

Here is a MWE of the code I am using for applying a titleformat to my chapters. But it does not get applied to my bibliography chapter. Any ideas why? \documentclass[a4paper,11pt]{report} ...
5
votes
1answer
2k views

Missing “References” heading

The word "References" does not appear before the references which I entered in my paper. The packages I am using are: \documentclass[final,times,1p,leqno,11pt]{elsarticle} ...
1
vote
1answer
1k views

Vertical space after Bibliography name

I am using Bibtex and need to change (smaller size) between bibliography name and authors names. The document class is report and I am using the natbib package. ...
1
vote
1answer
328 views

APA formatting and changing the parameters

So my teacher is being really picky with the APA formatting of my paper and I decided to use LaTeX to typeset my paper (currently its 21 pages). I used the package \usepackage[man]{apa} which has ...
2
votes
3answers
2k views

Bibliography title fontsize problem with BibTeX and the natbib package

I'm trying to change the fontsize of the Bibliography title to a normal size but I can't do it. I already try (without results): \let\chapter=\chapter \let\chapter=\section %works, but all the ...
6
votes
1answer
2k views

Remove bibliography title in moderncv with multibib

I want to have multiple bibliographies within my CV (moderncv class) so I've been using multibib. The trouble is, multibib automatically places a bibliography title above each bibliography, which I ...
1
vote
2answers
2k views

Force References Heading to Uppercase when calling \bibliography{bib filename}

Using \bibliography{filename} when I have \documentclass[10pt,letterpaper,twocolumn]{article} And \bibliographystyle{plain} before I call: \bibliography{filename} I get the heading ...
2
votes
3answers
630 views

LaTeX, BibTeX and keyword Reference

Is there a way of preventing LaTeX class article from printing keyword References. Namely, I would like to get LaTeX to print references from my database processed by BibTeX in the regular fashion but ...
9
votes
1answer
487 views

How to put bibliography under appendix

I already have a reference put using bibtex. I need to put few of my references under appendix. I tried giving like this in my project report: \bibliography{biblio} \bibliographystyle{ieeetr} ...
3
votes
1answer
331 views

Force no breaks after manual biographies in book doc class

After successfully applying tips on how to insert multiple manual bibliographies I have a new problem: each bibliography begins on a new page. This does not look good, and I tried supressing it with ...
1
vote
1answer
598 views

How to lower the bibliography's title by 3.3cm? And change its alignment?

I'm running a pretty hacked-up template for my thesis, and the bibliography chapter's title is now too high. (This is due to various changes to the 'normal' chapter titles and their alignment/spacing, ...
7
votes
1answer
922 views

\subsection{\citeauthor{some-bib-ref}} => “Token not allowed in PDF string”

I've got a section in my document in which every \subsection{} is about some paper and should be headed by a (textual) reference to that paper in the bibliography. However, with hyperref included, ...
2
votes
1answer
87 views

How can I include bibliography into numbering?

\documentclass[12pt,a4paper]{mwrep} ... \chapter{First chapter} ... \chapter{Another chapter} ... \begin{thebibliography}{999} ... \end{thebibliography} I have in ToC: 1. First chapter ....... 1 ...
1
vote
1answer
2k views

Does the \bibliography command add a page break afterward?

I am trying to add an entry from my .bib file into a document. After the \bibliography command is issued, the following sections starts in a new page. I have looked around but have not been able to ...
5
votes
2answers
741 views

Is there a way to change the font style of the “References” section?

Is there a way to change the font style of the "References" section of a document? I'm using the sectsty package to modify section fonts and my code does not seem to affect the "References" section ...
5
votes
2answers
868 views

Biblatex and mla-paper making weird headings

I'm trying to use mla-paper and biblatex with MLA style in the same document so I can have a managed bibliography but with the whole document in MLA. I seem to have it working almost properly, but it ...
40
votes
4answers
31k views

Making the bibliography appear in the table of contents

I need to make my (BibTeX) references section appear in the table of contents of my LaTeX document (documentclass: article), with section numbering too. My approach until now has been making a new ...
7
votes
1answer
1k views

How can I create a bibliography like a section?

I have the following: \documentclass{article} \usepackage{multicol} \begin{document} \begin{multicols}{2} \section{} \begin{thebibliography}{99} \subsection{Differentiation} ...
7
votes
1answer
4k views

How can I add the bibliography in a report with its own section, including number?

I'm writing my thesis as a report document using TeXShop (pdflatex and bibtex) and want the bibliography to get its own section number and appear in the table of contents. Here's what I've tried so ...
11
votes
4answers
17k views

Bibtex with no references title [duplicate]

I am working on writing a scientific poster in LaTeX, and I want to include a few references for my work. Because this is a poster, I have my own customized headers for different sections, and don't ...