1
vote
2answers
34 views

Unnumbered chapter in toc and heading

I'm writing a thesis using scrreprt and want the preface to appear as an unnumbered chapter. When I use \chapter*{Preface} \addcontentsline{toc}{chapter}{Preface} I get the correct entry in the ...
1
vote
1answer
18 views

Sections in ToC with links but without headings

I want to include some external documents (PDFs) in the appendix of the document I am writing. I would like to have these included documents listed in my table of contents, but no section heading ...
5
votes
1answer
83 views

Section Numbering in “Convex Optimizaion” by Boyd et. al. with Koma Script [duplicate]

I like the way the section numbering is typeset in the book Convex Optimization, i.e. the sections numbers are placed in the margin. How do I achieve this style with the scrbook class from the ...
2
votes
1answer
65 views

How to use fncychap's style for \section?

I have a complex document which requires the use of many levels of document structures. In particular, the first two levels, \part and \chapter are reserved for meta-information while \section plays ...
5
votes
2answers
133 views

How to have titlesec like behaviour for a Koma Script

I am using \documentclass{scrartcl} which I believe is a Koma-Script type. I now wish to have each \section{} start in a new page, similar to what \usepackage{titlesec} offers, as shown on this ...
8
votes
1answer
55 views

Headline adjustment

How can I adjust the chapter headline, so that the last line ends with the red box? And is there a way to move the whole chapter heading so that the word "chapter" is adjusted with the main text, i.e. ...
3
votes
0answers
42 views

\makechapterstyle{} for scrreprt (change chapter title format)

The memoir-class offers the command \makechapterstyle{} to define the look of all chapter titles (e.g. https://www.writelatex.com/1312879nbdvry#/3224717/) Is there a way to create something similar ...
1
vote
1answer
37 views

How to make \chapter and \part align right and get a quote under them?

Consider this example: http://jmvdveer.home.xs4all.nl/algol68g.pdf Section and chapter titles are set so they align with the right margin, how do I do that? and more importantly, how do I make them ...
1
vote
1answer
135 views

How to get Arial Narrow typeface in section header in pdflatex

I am new to LaTeX, so I hope this is not obvious, but have searched for straightforward documentation on how to do this and can't find it. I am creating a chapter for a book that has very specific ...
2
votes
1answer
53 views

KOMA-Script: How to colour just the section numbers

I have added a splash of colour to my thesis and found it looked quite nice. The theme is: Chapter and Section headings are a dark blue, and the numbering is a brighter blue. I managed to do this for ...
4
votes
1answer
96 views

Reducing chapter and section spacing for scrbook

I'm using scrbook document class and using chapters and sections. The spacing between chapters and sections is quite large, too large for my taste (before and after the chapter and section). So my ...
2
votes
1answer
36 views

In LyX, how can I remove the title and newline in a subsubsection?

I'm using the KOMA-script article class (\documentclass{scrartcl})and would like to remove the title and newline from the subsubsection, leaving me with a number followed by standard text. Ideally ...
1
vote
1answer
43 views

KOMA-script: enddot with appendix

Using the \appendix command somwhere in a KOMA-script document (in my case scrreprt) should change the behaviour of the enddot in a sectioning command: The chapters should only have an enddot if the ...
2
votes
1answer
132 views

Customise to a more fancier chapter opening

In the previous question, I tried to ask for one style per chapter. This time I would like to ask for customise the chapter opening. However, my case is a bit complicated, let us see the MWE first. ...
1
vote
1answer
60 views

KOMA-script modify part* page

My document has parts and *parts. I redefined the \part to print only a decorated number, that's working fine. Now I need \part* to print a decoration using the same style as \part. \part*{} ships out ...
2
votes
2answers
87 views

Create new section commands (with correct TOC entries) in KOMA-Script

What is needed to make a new sectioning command which outputs a correct entry in the TOC? For example, a command \foo which outputs something similar to \subsection in the TOC (and in the main ...
1
vote
3answers
199 views

Chapter Title adjusting with koma-script

The following minimal working example is not giving me the desired results. I would like to keep the chapter titles layout, but without using the titlesec package. The titlesec package is interfering ...
4
votes
2answers
266 views

Chapter title format back to default

I messed with various chapter title formats and now that I want to go back to default i.e Chapter 1 Title I only get 1.Title which misses "Chapter 1" appearing before the chapter title. I ...
4
votes
1answer
75 views

Koma script: Restore default chapter style

I want to have for just one chapter a special chapter heading format. So I use the command \setkomafont{chapter}{\centering\large\rmfamily} and then I want to revert back to the default chapter ...
3
votes
1answer
891 views

KOMA-script scrreprt: Chapter Heading Size Customisation

This is a continued question from my previous thread I am setting up LaTeX to write my thesis using scrreprt. I have implemented with success all the advised and suggested solutions and have tried to ...
6
votes
2answers
861 views

KOMA-Script scrreprt: How to change chapter appearance and produce a chapter based Mini TOC

This post is a 3 part question with which I would need help. The questions are all associated with chapter styling and subsections within the \documentclass{scrreprt}. I am sure I could work them out ...
0
votes
1answer
69 views

Footnote in sub-section title

Trying to put a footnote in subsection title: \subsection{Effect of Lateral Confinement on SW Band Structure\footnote{Parts of this sub--section are based on \citet{Venkat2013}}} produces the ...
10
votes
2answers
809 views

Customizing Chapter style in scrbook

I want to obtain styles like those showed in the next two images (I do not need the picture in the background (parabolas)): My original LaTeX code (to be customized but should keep font as they ...
0
votes
1answer
93 views

How can I get the word “Chapter” to be typeset in chapter headings (scrbook)?

I am using the scrbook class, and I want the word "Chapter" to appear in the heading of the chapter, instead of just the number. How can I do it? I tried \renewcommand{\chaptername}{Chapter} but ...
1
vote
1answer
297 views

Remove chapter number from Bibliography

MWE: \documentclass[english]{scrreprt} %%% PAGE DIMENSIONS \usepackage{geometry} \geometry{verbose,a4paper,tmargin=3.5cm,bmargin=2.5cm,lmargin=2.6cm,rmargin=2.6cm,headheight=1.3cm,headsep=1cm} ...
3
votes
2answers
133 views

Q: How to globally add space before subsubsection* headings in Lyx?

How do I set the document to add extra space above each subsubsection*? Does one redefine the subsection command in the preamble, like the following? Formatting section titles I am using KOMA ...
3
votes
1answer
162 views

Create a custom heading in scrreprt (normal fontsize, boldface)

I finally managed to make an account here, but I have asked 2 questions before without making an account :) Ok my next question is the following: I am using the class scrreprt and the usual commands ...
7
votes
1answer
703 views

KOMA-Script scrbook: How to change V-space between chapter prefix and title

My university has style requirements for my dissertation that seem to be tailored to users of MS Word and the like. In particular, the formatting of section headers differs only by use of ...
4
votes
1answer
321 views

KomaScript Book: How to have Chapter Headings formatted just like text?

Might seem like an odd thing to do, but so far it's proven beyond my novice-level Latex abilities, and related posts I've looked at on this site seem a little more complicated than what I need. In ...
3
votes
2answers
191 views

Chapter headers with extending vertical rulers

I'm trying to reproduce the example below on the right margin, but have come into serious errors. \documentclass[a4paper,DIV=classic]{scrbook} \usepackage{scrpage2} \usepackage{lipsum} ...
3
votes
1answer
331 views

titlesec warnings

I am trying to make my own style for chapter headings using koma-script and titlesec. The document compiles fine, but some errors are generated: Package titlesec Error: Entered in horizontal mode ...
4
votes
1answer
179 views

How to get headings indented as the first lines of paragraphs?

I would like the chapter and (sub)section headings to be indented as much as the first lines of paragraphs (\parindent value). By default using koma-script I get them aligned with left boundary of ...
2
votes
1answer
2k views

Change the chapter style in scrbook

Is there a way to change the chapter style in scrbook like in memoir with \chapterstyle{}?
2
votes
0answers
97 views

How to avoid page overrun using scrreprt document? [closed]

I'm in the process of writing a requirements document and have been using a template based on the scrreprt document class. The problem I'm running into is that when I compile my document, in certain ...
2
votes
1answer
147 views

How can I have list of figure etc. labelled D. List of Figures, E. List of Tables, F. Bibliography…?

I am using KOMA class scrreport and want the following structure of my appendix: A. Abbreviations B. ... C. ... D. List of Figures E. List of Tables F. Bibliography G. Acknowledgments ...
11
votes
2answers
471 views

What does \secdef do?

The definition of the chapter command in KOMA-class scrbook is: \newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi \thispagestyle{\chapterpagestyle}% \global\@topnum\z@ ...
4
votes
2answers
611 views

How to change part and chapter pages on KOMA-Script?

In KOMA-Script classes, how can I change the appeareance (font size, color, arrangment, content, etc.) of the page created by \part an \chapter? The pagestyle can be changed easily with KOMA-Script ...
5
votes
1answer
480 views

How much pt is headings=small?

I am using this code for my seminar paper: \documentclass[headings=small,fontsize=12pt,a4paper,oneside,]{scrreprt} but I was wondering: how many pt are headings=small? It looks like 14pt but I am ...
2
votes
2answers
753 views

KOMA-Script scrreprt: Section numbering and heading embodied into the first line of text

Using KOMA-Script package scrreprt I need to have the section numbering and heading included in the first paragraph of the section itself and the numbering of sections restarting from each chapter, ...
4
votes
2answers
214 views

layout section heading

Language requires the following layout for section headings: b. The number and the following period should be in boldface; the heading text should be in SMALL CAPITALS. d. Do not use more than two ...
18
votes
1answer
845 views

Different vertical spacing (parskip) between concurrent section titles and paragraphs

I'm trying to remove the spacing between section headings, but maintain the paragraph to section heading spacing. Even though I set titlespacing before and after to *0, there is still spacing - quite ...
10
votes
4answers
2k views

Lowercase small caps in section/subsection/…

I'm interested in setting the titles of section and more in lowercase small caps. And I don't know how to automatically achieve this. \documentclass{scrartcl} \setkomafont{sectioning}{\scshape} ...
4
votes
2answers
591 views

Heading number in margin using titlesec and/or komascript

Using titlesec and/or komascript how do I format all headings so the number is left aligned in the margin, the title to the right, with a horizontal rule underneath it all (from margin to text width ...
0
votes
0answers
24 views

How to remove the chapter prefix only from a Preface chapter in scrbook? [duplicate]

Possible Duplicate: Adding numberless chapters to the table of contents how can I remove "1" from the Preface chapter: \documentclass{scrbook} \begin{document} \tableofcontents ...
12
votes
1answer
2k views

Headers and page numbers in external borders

I am trying to recreate in *TeX the same aspect that you can see in the following picture showing a document that I created a while ago with MS Publisher. As you can see, page numbers are rendered ...
3
votes
1answer
656 views

How to uppercase heavily customised sections (sectsty+fontspec)?

I am trying to customise the aspect of a scrbook to look like a book I have. In my case, sections should be formatted as follows: the font face should be Conques Demi, the font size 26 pt, the font ...
3
votes
2answers
1k views

Format appendix chapter title with titlesec in a scrbook

I'm writing a longer text and redefined the Design of a Chapter start page using titlesec. For example \documentclass[cleardoublepage=empty,fontsize=11pt,a4paper,twoside,DIV=calc]{scrbook} ...
2
votes
2answers
2k views

Set default Koma script font to Times [duplicate]

Possible Duplicate: KOMA-Script: change font of sectioning headings to serif I am using scrbook document class but want to change the default font to Times. However when I add: ...
4
votes
1answer
452 views

How can I force hyphenation in chapter titles?

I have a (German and English) document, which uses the scrbook class fromt he KOMA package, with long German words in the chapter titles. I would like Latex to hyphenate those words when necessary, ...
0
votes
0answers
29 views

Chapters on the same page or not displaying parent counters [duplicate]

Possible Duplicate: Start new chapter on same page Using the scrbook class so far, what I want is either to get new chapters to start on the same page as the last one (after a reasonable ...