{setspace} is a package providing support for setting the spacing between lines in a document, e.g. allowing double-spacing.

learn more… | top users | synonyms

4
votes
1answer
131 views

footmisc has to be loaded after setspace - Why?

If footmisc package is loaded before the setspace package, then it doesn't work. Though I don't need a work around, since this is easy to incorporate in a document, I just thought that I should share ...
2
votes
2answers
1k views

change space to only a part of the document [duplicate]

Possible Duplicate: Change line spacing of a page and size police inside the document I created a document using book class and set the space using \usepackage{setspace} \onehalfspacing ...
5
votes
1answer
2k views

Number of lines in double spacing (compared to Word)

I am a newbie to LaTeX. I noticed that my document is almost a page longer in Word compared to LaTeX. (~7.25 in latex, ~8.25 in Word). This seems to be because my Word document has 23 lines per page, ...
10
votes
3answers
402 views

setspace and quoting environment result in superfluous empty line

I was trying to set up the quoting environment by the package of the same name, which included single line spacing for block quotes as opposed to one and a half line spacing for normal text. The ...
8
votes
1answer
153 views

Doublespacing is moving my page number

I'm using the KOMA-Script report scrreprt to typeset my PhD thesis and the graduate school requires that the main text be double spaced and that the page number be in the top right. When I enable ...
4
votes
1answer
386 views

Strange interaction between amsmath and setspace

Compiling the MWE below, you will observe in the output the following phenomenon (you may have to zoom in): Comment amsmath out. Then, the spacing beteen lines is such that the subindex of the ...
2
votes
2answers
300 views

How to doublespace a sidewaystable using setspace?

As a follow-up to a previous question, How to doublespace a table using setspace?, I found that the solution is not compatible with the sidewaystable environment defined in the rotating package. I ...
6
votes
1answer
6k views

How to doublespace a table using setspace?

I have used setspace with \spacing{1.9} to meet publisher specifications of "3 lines per inch or 12 lines per 10 cm", but it does not affect tables, although the publisher has requested that the ...
3
votes
1answer
1k views

Parentheses size around matrix

I would like to get 1:n matrix with \left, \right size parentheses. Default size looks not so good. Now I have $\begin{pmatrix} f_0 & \ldots & f_L \end{pmatrix}^T$ The view I get I can ...
2
votes
1answer
363 views

Draft footnote changes position

I use the prelim2e package to mark a document as a draft. This package puts a draft line below the normal footer that contains for example Preliminary version – May 15, 2012. Usually this draft line ...
4
votes
1answer
314 views

Inconsistent behavior of setspace package in ctable doinside

This is odd: \ctable[ doinside=\singlespacing, %doinside=\setstretch{1} ] {lp{5cm}} {} {\FL Blubb & Blobb simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the ...
2
votes
1answer
251 views

Spaces around display math when using setspace

I'm using setspace package in the following way: \usepackage{setspace} \onehalfspacing It works well, mostly very nice result, but the spaces around display math formulae had enlarged too and now ...
8
votes
1answer
866 views

How to change line spacing in footnotes?

I have a document with line spacing 1.5. But I want the footnotes line spacing 1. How could I do this? I tried the package setspaces but does not allow me this option.
11
votes
2answers
21k views

How do I double-space my abstract in LaTeX?

I'm finishing up my undergrad thesis, and I have to double-space my abstract. I tried using \begin{doublespace} and \doublespacing, but neither have worked, I assume because the abstract environment ...
3
votes
2answers
12k views

How can I single-space text within entries of my table of contents?

I am writing my dissertation. My university requires that the document be double-spaced; I am using the setspace package to do this. However, I must single-space entries of the table of contents ...
8
votes
3answers
7k views

Using \textsuperscript to put commas between consecutive footnotes in amsart document

I'm trying to insert a comma between consecutive footnote markers in an amsart document. I'm trying to do this without using the footmisc package, since for some reason it causes the footnotes in my ...
8
votes
1answer
902 views

Footnote indentation with amsart and setspace

A follow-up to this question: amsart, setspace, and footnotes As explained there, using the setspace package in an amsart document removes the indentation in the first lines of footnotes. This is ...
4
votes
2answers
2k views

How to set default line spacing in a .cls file?

I am writing a document class where I want to set the default line spacing to be 1.5. How can I use the setspace package to achieve this? More particularly, where in my .cls file should I mention ...
4
votes
1answer
1k views

Overfull vbox with scrbook and setspacing

The following MWE gives me a lot of badbox warnings Overfull \vbox (1.39674pt too high) has occurred while \output is active [] with always the same value of 1.39674pt. It seems to be related to the ...
8
votes
2answers
5k views

Minted, setstretch and font size

I'm using minted package. My problem is \usepackage[nodisplayskipstretch]{setspace} \setstretch{1.5} line. I do need this line stretch, but I don't want it to affect code sources generated by minted. ...
2
votes
0answers
90 views

Make all \begin{quote} … \end{quote} blocks single spaced with setspace? [duplicate]

Possible Duplicate: Reduce the space between a quotation and a title I am writing a double-spaced paper using the setspace package. I need quotations to be formatted with single spacing, ...
4
votes
2answers
631 views

Reduce the space between a quotation and a title

When I use the quotation environment at the start of a section I get too much space between the title and the start of the quotation. How to modify spacing around quotation environment? has ways to ...
6
votes
3answers
9k views

Change line spacing for footnote text only

I have to format a document to this finicky standard: "The entire document cannot exceed 25 double-spaced pages, including all supplementary material, and must be in Times New Roman, 11 point, font. ...
2
votes
1answer
16k views

setspace.sty not found

I'm trying to do double-spacing using the setspace package, but I'm getting a setspace.sty not found error. My code looks like this: \documentclass{article} \usepackage{setspace} \begin{document} ...
12
votes
3answers
4k views

Line spacing inside quote environment

I use the setspace package to set double spacing throughout the document. It also sets double spacing inside the quote environment. But, I want one half space inside the quote environment. How can ...
5
votes
3answers
2k views

Change line spacing for normal text, but not in tabular or verse

\usepackage{setspace} \doublespacing I used above two lines to change the spacing in my document. This changes the spacing of the entire document. My requirement is to change the line spacing in ...
11
votes
2answers
2k views

Wrong spacing before theorem environment (amsthm)

I am using the amsthm package to have environment. I also use \usepackage[onehalfspacing]{setspace} to have 1.5 line spacing. However, when I use the the theorem environment, the spacing before is ...
8
votes
1answer
2k views

How to set fixed (8mm) linespacing?

My university wants me to have in my report line spacing of not less than 8mm. ( Font size must be 11pt or larger. ) How can I specify this other than using \lineskip which is discouraged? I'd like ...
1
vote
1answer
926 views

Glossaries \glossarypostamble - set text single spaced

I use the package setspace to set my text single spaced. My list of tables, list of abbreviations and so on I set with the command \onehalfspacing. Furthermore I need an annotation in all lists. This ...
2
votes
1answer
264 views

Adjust vertical space of headings carried out by different line spacing

A question related to the koma script guide. As recommended on page 57, I set the table of contents, glossary, list of tables and list of figures with the standard line spacing. The text should have a ...
5
votes
2answers
333 views

ledmac vs. setspace: Don’t change spacing of critical notes

Normaly setspace tries to set only the stretch of main text an footnotes are unchanged. In combination with ledmac the critical notes are stretched too. Is there a way to unstretch the notes like ...
1
vote
2answers
2k views

Setspace package not working

I've tried searching, and I couldn't find my answer, so I hope I'm not re-asking stupid stuff. That being said, I'm a total noob to LaTeX. As such, this question is probably ridiculous and stupid. ...
6
votes
2answers
2k views

Why does doublespacing using setspace have errors when used in a minimal documentclass?

Just curious why \doublespacing seems broken in a minimal document. It works ok when the documentclass is set to article. \documentclass{minimal} \usepackage{setspace} \doublespacing ...
61
votes
3answers
20k views

What does 'double spacing' mean?

I think I know the meanings of \baselineskip, \lineskip and \lineskiplimit in TeX, I also know \baselineskip, \baselinestretch, \linespread and the second argument of \fontsize in LaTeX. However, I ...
0
votes
1answer
415 views

setspace kill the \flushbottom, how to make the sep between footnote item equal that in normal text

I want double spacing, but then sep between footnote item is strange. I use setspace package, but it kill the \flushbottom mechanism. Is there a method after I set \linespread{2}, the footnote text ...
9
votes
1answer
923 views

How can I set single spacing in todonotes?

Question How can I \renewcommand{\todo} to give single spacing in the todonotes of an otherwise double spaced document? What I have tried The documentation (p. 11, section 1.8.6) suggests that ...
3
votes
1answer
1k views

figure overrides linespacing

I am using framed package to draw a box around some texts. When I compile it without wrapping it up in the figure command I have no problem. However, when I use it like this: ...
16
votes
1answer
6k views

Finely control line spacing when already using the setspace package?

I'm using setspace to double-space an article (as it's widely known, this package behaves more intelligently than \linespread, Double line spacing alread covers the details). \usepackage{setspace} ...
5
votes
1answer
1k views

amsart, setspace, and footnotes

When I use the setspace package in an amsart document, the indentation of footnotes is messed up; the first-line indent is lost, with everything pushed to the left. Sample document: ...
79
votes
3answers
165k views

Double line spacing

I would like to typeset a draft of my document with double linespacing so that my collaborators have space to write in their edits (with a pen). How do I do it?