{siunitx} is a package that provides consistent typesetting of physical quantities, allowing application of various typographic conventions with the same input syntax. This package replaces the deprecated {siunits} package.

learn more… | top users | synonyms

2
votes
2answers
110 views

Different column widths under a multicolumn prevent appropriate centering

How can I center the two columns inside the multicolumn? MWE \documentclass{article} \usepackage{booktabs} \usepackage{multirow} \usepackage{siunitx} \sisetup{input-ignore={,}, ...
2
votes
1answer
83 views

Calligraphic font for Bitstream font and inter-package error

I try to load and use a calligraphic font but it seems that the combination of siunitx, upgreek and bm causes the error, but for some reasons the error-message ('Too many math alphabets used in ...
2
votes
2answers
304 views

Remove trailing zeros when using siunitx

Consider the following example: \documentclass{article} \usepackage{multido} \usepackage[ round-mode = places, round-precision = 4 ]{siunitx} \ExplSyntaxOn \cs_new_eq:NN \calc \fp_eval:n ...
2
votes
1answer
198 views

How to correctly use siunitx to align number in the center of a table for number with preamble

I would like to have my numbers aligned left but centered in a table as in this solution, which I also tried to apply. Now my numbers are of the form ~24%. For a correct alignment I tried to protect ...
2
votes
1answer
637 views

Spurious spaces in tabular environment with siunitx and percent symbol

I keep getting spurious spaces when I use the siunitx in a tabular environment in the presence of a percent (%) symbol. I am trying to align at the decimal point. My code is: \begin{tabular}{lS} ...
2
votes
2answers
746 views

siunitx multicolumn problem

In addition to Right-centered columns in LyX, I have another problem, now with multicolumns. I want to center the number "98" (which spans two columns) above the two other columns. These shall be ...
2
votes
1answer
44 views

siunitx: Appended currency symbol mispositioned with aligned negative values

I'm trying to do some LaTeX-table-magic for a friend, and I've run into a strange issue I haven't been able to find a solution for. I'm using siunitx (along with booktabs) to align some values in a ...
2
votes
1answer
37 views

Sinunitx, fourier, euro, utf8 problem

In this MWE, I can't have € in math mode since I've updated siunitx package. Before it worked fine. I found that take the fourier package off make it work again ...
2
votes
1answer
113 views

Misaligned vertical lines in table

In my document I use different kinds of tables, as shown below in a simplified way. My problem only affects the first table shown in the output. Strangely, the vertical lines between columns "B" and ...
2
votes
2answers
82 views

siunitx : forced parenthesis

Is there a way to force siunitx use parenthesis systematically ? I tried bracket-numbers but it's only if : There are certain combinations of numerical input which can be ambiguous. I'd like to ...
2
votes
1answer
40 views

Conflict between ULon and siunitx

I am trying to create an automatic numbering of remarks which will be highlighted. It does produce the expected result but it crashes and I don't understand what is wrong. Below is the minimum working ...
2
votes
1answer
200 views

siunitx table with separate-uncertainty is too wide

I'm using a tabular environment with the siunitx type S and the package option separate-uncertainty, like in the example below. In the resulting document, the columns are too wide, and the 3rd column ...
2
votes
1answer
102 views

Problems with table layout

I have some issues when creating my OLS regression in LaTeX and I really hope, that some of you could help me. I have three questions: 1) How to make "Growth 91-92" and "Growth92-93" with a space, so ...
2
votes
1answer
354 views

Use emulateapj/aastex with siunitx

I am trying to use siunitx in an emulateapj document, however it reports a conflict of command: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! LaTeX error: "xparse/command-already-defined" ! ! ...
2
votes
1answer
671 views

Aligning the decimal point using siunitx and longtable?

I have just discovered that I couldn't do alignment of the decimal points using the siunitx and longtable packages. It throws errors, just to mention some for e.g.: Invalid numerical input 'e' Col1 ...
2
votes
1answer
341 views

How can I align numerical and angle values in a table using siunitx?

As described in DIN 461, units such as "Degree", "Minute" or "Second" should stay with their numerical value when labeling the tics of a coordinate system. I have no proof, but I think that this rule ...
2
votes
1answer
711 views

xkeyval gives error with siunitx on some LaTeX installations

\documentclass{article} \usepackage{siunitx} \begin{document} \SI[per-mode = fraction]{3.00e8}{\meter\per\second} \end{document} I've tested this on three different computers, all running ...
2
votes
1answer
197 views

How to typeset hh:mm:ss time format in math mode?

What's the correct way to typeset a daytime in the format hh:mm:ss in math mode? For example in $2:13,12\,\mathrm{min} = \SI{133,12}{s}$.
2
votes
1answer
87 views

Odd behaviour when dashes are add in a table?

Using the following MWE : \documentclass[12pt,a4paper]{report} \usepackage[lmargin=3.81cm,tmargin=2.54cm,rmargin=2.54cm,bmargin=2.52cm]{geometry} \usepackage{booktabs} \usepackage{siunitx} ...
2
votes
1answer
360 views

number with subscript in siunitx

I would like to use output-decimal-marker = {--} in siunitx to align a column with molecular transitions where the states are separated by --. However I get a Missing $ inserted error when the state ...
2
votes
1answer
667 views

siunitx S-column in table: can I combine scientific notation and decimal numbers in one column?

I have a table with values exported from a statistics software, where the values are formatted like this (see example below): Some (very small ones) are in scientific notation, some are in "normal" ...
2
votes
1answer
1k views

siunitx update breaks things

I upgraded to v2.1 of siunitx since the version in ubuntu's package manager (1.3?) is pretty old. Things seem to have broken. I might have got something wrong with the installation, or I might be ...
2
votes
1answer
33 views

Overfull hbox with S column from siunitx

Based on a previous question I created the MWE given below. What I don't understand is that I get three Overfull \hbox (9.9778pt to wide) warnings. Where do they come from as they don't appear in the ...
2
votes
1answer
28 views

Formatting S columns with percent

Why in the following tables the results of formatting of S columns are different, i.e. dependent on, where the column is in table? Consequently those tables have different width. ...
2
votes
2answers
73 views

Apply Siunitx to every other row

I have a table that has alternating rows of percentages and counts. How can I conditionally apply SIunitx to every second row? I want the row of percentages to be left as it is (to one decimal ...
2
votes
1answer
29 views

Setvariable and siunitx exponent-to-prefix producing error“prefix-only”

I am trying to store SI-units in variables so that I can manipulate the number mathematically and show it afterwards with the correct prefix and exponent according to our schools scientific notation ...
2
votes
1answer
33 views

\luaexec inside \num causes errors

To me, an attractive feature in LuaTeX is the ability to effectively perform calculations directly in the document. Now say I want a command \proc that performs calculations and then formats the ...
2
votes
1answer
57 views

Aligning number with siunitx in spreadtab including calculated numbers

I would like to have this kind of table \begin{spreadtab}{{tabularx}{\linewidth}{XS[table-format=4.2]l}} \toprule @{Was} & @{Betrag [\euro]} & @{Belegart} \\ \midrule @Nice People Charity ...
2
votes
1answer
116 views

pgfplotstable error on read

I have a Problem with a \pgfplotstableread command. I m always getting the output: Package PGF Math Error: Could not parse input 'VasconcelosEtAl2012' as a floating point number, sorry. The ...
2
votes
1answer
123 views

Siunitx adding the \cdot and \chemfig to get extra top space in a tabular

i am having a problem compiling, i get an error of missing $ and { also } when i use \si....... [siunitx package] ----> I tried the \sisetup... but it gives me an error, may be it has conflicts with ...
2
votes
1answer
94 views

Percentage sign in column centered about decimal point

I know how to centre a column about the decimal point using the siunitx package. How do I include a percent sign in the column heading, ie "Heading (%)"? Neither \% or \SI{}{\percent} seem to work. ...
2
votes
1answer
134 views

Libertine with sfmath and siunitx in Beamer

I am trying to use the Linux Libertine fonts with sfmath and siunitx package but it doesn't work with beamer class. \documentclass[11pt]{beamer} \usepackage[utf8]{inputenc} ...
2
votes
1answer
109 views

possible side effect of siunitx, tgheroes, familydefault combination

I use the following code to change the font to sans serif. I would like to use TeX Gyre Heroes and copied the code snipped from tug.dk. \documentclass{article} \usepackage{tgheros} ...
2
votes
1answer
568 views

Engineering notation (scientific) as tick labels with pgfplots (maybe via siunitx)?

I would like to have numbers on the ticks labels formatted in engineering notation -- but unlike in How to control pgfplots axis scaling for engineering notation (multiple of 3 exponent)?, I would ...
2
votes
1answer
453 views

Alignment of siunitx S-column looks bad with big numbers

I have to put a bunch of numbers into a lab report, and I currently use siunitx with tabular and the S column type. It looks great for small numbers and large column heads. However, for small heads ...
2
votes
1answer
291 views

Conflict between glossaries and siunitx (possibly via hyperref) when defining color

I'm in the process of writing my thesis which has a large glossary. The hyperref and glossaries package allow for linking and colouring the references, which is great. Unfortunately the large number ...
2
votes
2answers
617 views

Including range is multi-part numbers

How do I produce something like "4 x 5 x (10--15) mm^3" in siunitx? Thanks!
2
votes
1answer
250 views

Can the siunitx table alignment feature, S, align ratios?

I'd like to align a list of ratios in a column of a table by the colon. Is this possible using siunitx? For instance ratios like the following. 1:0.9 1:1.0125 1:0.99
2
votes
1answer
760 views

Error: “per-mode” is undefined [closed]

The simple expression: $v_f = \SI[per-mode=fraction]{32}{\meter\per\second}$ when parsed, yields the following error: ! Package xkeyval Error: `per-mode' undefined in families `key'. However, ...
2
votes
1answer
517 views

Can siunitx use roman when familydefault is set to sans serif? [duplicate]

Possible Duplicate: Can I make siunitx commands use serif fonts like the rest of the math in beamer? I have a MWE showing setting the family default to sans serif with ...
2
votes
1answer
28 views

siunitx: What is the correct way to output mean and standard deviation as “M (SD)” in an S-column?

I am trying to use siunitx in a psychology results table to line up decimals, and the table looks like this: \documentclass[]{article} \begin{document} \begin{table}[h] \begin{tabular}{@{}cc@{}} ...
2
votes
1answer
36 views

Customizing first column for each row in pgfplotstable

I have a confusion matrix where the first column (or in this case the second column) has the same labels as the first row (or in this case the second row). The problem I have is that these labels are ...
2
votes
1answer
69 views

Macro to emulate \SI macro of siunitx package

I am using pandoc to convert a .tex document into a .docx. The tex document uses the siunitx package. As pandoc can not interpret the macros in the package, I have to write dummies for the macros I ...
2
votes
1answer
86 views

Format table number alignment

I am having a few problems with the following code: \documentclass{standalone} \usepackage{booktabs} \usepackage{siunitx} \begin{document} \begin{tabular}{ l S[table-format = 4.2] ...
2
votes
1answer
128 views

siunitx and hvmath fonts: strange mixing with cm fonts

I'm using hvmath, a proprietary font by micropress. The hvmaths package is openly available: as far as I understand, its aim is to replace text and math fonts with the ones provided by hvmath font ...
2
votes
1answer
200 views

Simplify LaTeX document to satisfy editing office

I have a LaTeX manuscript prepared using a publisher class file (agutex) where I've used four packages (booktabs, glossaries, siunitx, graphicx). I use glossaries in particular for acronyms. After ...
2
votes
1answer
476 views

siunitx error: “invalid-number” from R

I have a document in .Rnw which I use to produce a .texdocument with kntir. I have a problem with the formula \num{\Sexpr{max(degree)}} which in R console produce 12598 but after the running knitr in ...
2
votes
1answer
361 views

siunitx in scrreprt - problems with beamer class

I want to use the usepackage siunitx for my thesis (scrreprt). MikTeX asks for installing the documentclass beamer each time when I compile my document (and then freezes while installing). When I ...
2
votes
1answer
630 views

siunitx: bold single numeric cells + mathspec

I need to bold and align numeric values in a table while using both mathspec and siunitx packages. I've looked at siunitx: Bold single numeric cells for bold and alignment in a tabular environment ...
2
votes
0answers
47 views

Table title and notes not appearing in PNAS

I'm trying to prepare a manuscript for PNAS and am running into issues with a table. As in this question/answer, the table is placed after the \end{article}. However, when compiling the document, the ...