4
votes
1answer
46 views

Arbitrary positioning in math mode without size restriction

In the MWE below, are all general methods, of achieving arbitrarily shifting of symbols up or down or left or right in math mode, represented? If yes, that is the answer. If no, what good methods are ...
3
votes
1answer
70 views

Given a 3x4 table of images, how do I make all the images the same size and remove vertical space so the table looks seamless?

I'm using a table to format a series of images. My goal is to create an image array where the transition from one figure to the next is seamless i.e. no white space anywhere. My problem is that the ...
3
votes
1answer
61 views

The text-equation space in two equations is extremely different; even though I left no blank lines

I am introducing this text and equation: Con la energía del punto cero pasa una cosa muy similar: utilizando la ecuación \ref{E_ZPE}, y sustituyendo las tres frecuencias $\nu _{i}$ experimentales ...
1
vote
0answers
60 views

Space between Caption and image

i have gone through all answers related to this question. But in my case nothings seems to be working.. I wish to reduce the space between image and caption. But none of the method is working. Here is ...
4
votes
2answers
97 views

Large image should ocupy all page without blank space around

I'm new to LaTeX and although my supervisor does not use LaTeX, I've decided to do my master thesis in LaTeX. However, I'm having a problem with the images. I have big images generated through R. ...
2
votes
1answer
44 views

Big space between subsection, text and graphics

I have a problem with space between subsection, text and image. I have code: \documentclass[12pt, a4paper]{article} \usepackage[demo]{graphicx} \usepackage{caption} \begin{document} \subsection{Some ...
3
votes
2answers
90 views

An .eps image, whose caption is too separated from the image.

I am writing a thesis in a large .tex file in Vim. I have an .eps image, whose caption is too separated from the image. I have extensively read similar posts, tried almost everything, but the ...
0
votes
1answer
48 views

Shifting (sub)figure caption in case of merged figures

I have a small piece of code that merges two figures: \begin{figure} \centering \begin{minipage}{.5\textwidth} \hspace*{-1.5cm} \includegraphics[scale=0.45]{images/Figure1.pdf} ...
4
votes
1answer
236 views

What causes this large horizontal space between two sentences?

I have a large document based on the book documentclass with text and images, and sometimes I encounter a new sentence that has a huge space after a period. It looks like this: I have attempted to ...
3
votes
1answer
194 views

Figure overlaps Table

When placing a table then a figure, the figure overlaps half the table.. Here is what the tex looks like: \begin{table}[h] ...
4
votes
1answer
79 views

Too much space below figures [duplicate]

I am trying to use graphicx package to include figures. However it seems to leave too much space between the figure and caption. My LaTeX lines are \begin{center} ...
3
votes
1answer
73 views

How to get the available space for an image

I want to design a figure (in a external graphics editor, e.g, Illustrator) to exactly fit (without scaling!) the whole available space on an empty page of my document minus the caption of the figure. ...
5
votes
1answer
109 views

How to prevent \includegraphics from inserting whitespaces / margins (no float)?

I am using \includegraphics from the graphicx package directly with no floating environment like figure. I need the images placed precisely, but something is inserting space automatically. ...
2
votes
1answer
51 views

Setting the line length for caption

I am trying to use subfigure to put two figures beside each other and unfortunately LaTeX puts them to the right. I used hspace to reduce the space between them and that results in messing up the ...
5
votes
2answers
151 views

Positioning of images/graphics in tables

I need to create a table where cells in one columns are images, not text. This is the code I'm using: \begin{table}[hbtp] \centering \begin{tabu} to \textwidth {|c|c|c|c|} \hline ...
4
votes
1answer
101 views

Spacing captions in a subfigure environment

I'm trying to use the subfigure environment to generate side-by-side images with captions, however because the images are different heights the captions come out at different heights. Also, they come ...
6
votes
1answer
170 views

MetaPost: Non-uniform periodic tessellations

Overview Looking to create backgrounds that have regular polygons aligned to a grid. Problem The space between the polygons varies, even though the radius for the polygons has been calculated in ...
4
votes
1answer
2k views

TikZ: remove margin, padding, border around nodes containing images

I want to create a simple figure where images are connected with arrows. Here is what I did: \begin{tikzpicture} \node[](A) {\includegraphics[width=0.2\textwidth]{a}}; \node[right=1mm of A](B) ...
3
votes
1answer
253 views

No space between vertical rule and image

I want to design a titlepage for a beamer presentation (XeLaTeX, Miktex 2.9-64, Win7-64) and need to reduce the space between a rule and a graphic to 0. My code: \setbeamertemplate{background} ...
1
vote
0answers
31 views

how can i add more space on Table [duplicate]

My code is here. \begin{table}[t] \centering \begin{tabular}{|c|c|c|} \hline Graph $G$ & Graph $H$ & An isomorphism between $G$ and $H$\\ \hline ...
4
votes
2answers
140 views

Vertically centering a set of tabbed graphics

I have a lot of different graphics in three versions each. All those versions have a fixed width and I want those three versions to be displayed next to each other. So far, I've used a tabbing ...
5
votes
1answer
199 views

How to eliminate spacing in tikzpicture?

It seems that, when using Tikz, nodes and/or the tikzpicture environment add space around a drawing. An example is shown in the following MWE, where a simple square is drawn three times. First it is ...
4
votes
1answer
2k views

Beamer: Full width image, aligned to top with a frame title

I would like to include a full width image, aligned to the top of a frame with a frame title. The problem is, I cannot get rid of a line of white space between the orange frame title header and the ...
0
votes
1answer
834 views

How do you create spaces between Images?

How do you create spaces between Images? I have tried using the commands // after paragraphs that precede images but this only produces a space between the paragraph and the image. I have also used // ...
1
vote
2answers
435 views

Empty space after adding an image [duplicate]

After adding an image I have an empty space. How can it be reduced? I used \FloatBarrier. But it did not worked. % Following copied by Marc van Dongen from comment from OP. ...
5
votes
2answers
174 views

How to avoid text-spacing after inserting figure?

I am trying to insert a little figure(logo) to a document without changing the vertical spacing. I have two lines of text and I want to insert the figure in the align with the second line. I can do ...
1
vote
0answers
343 views

remove blank space before image [closed]

When I insert a figure, there is some blank space before it that Latex adds it. How do I remove it? \headerbox{Poster Box 1}{name=box1,column=1, below=box2}{ \begin{minipage}{20em} ...
1
vote
2answers
445 views

add blank space before image

I'm drawing two images, one on top and one in the bottom, and I want them to be aligned. One of them has some extra blank space one its left side, so I need to realign it manually: ...
4
votes
1answer
499 views

How to set figure - caption spacing individually in a floatrow environment?

In the preamble I use : \usepackage[labelformat=empty]{caption} \usepackage[heightadjust=all,floatrowsep=none,captionskip=3pt]{floatrow} With this package I'm able to put two figures horizontally ...
3
votes
1answer
119 views

A small inline graphic

Let's say I have the following text (a part of a paragraph): hello world I want to be able to typeset a small star/smiley/whatever graphic in between these two words. This graphic should of course ...
1
vote
1answer
668 views

Force newline, but collapse vertical space

I'm trying to create a block of subfigures with no space between them, The above is the desired result, but the way I did it feels hacky. I used a newline forcer followed by negative vertical ...
3
votes
1answer
97 views

Flush stacked rotated images

I have a series of images that I would like to line up horizontialy, all scaled to a given height, rotated 90 degrees and exactly flush with respect to each other. For example: ...
18
votes
3answers
872 views

Typesetting a dictionary containing pictures

I am seeking advice (any ideas) how to typeset a bilingual dictionary that will contain many pictures. The picture below shows the dictionary. Problems: The lines in columns differ. The spaces ...
2
votes
2answers
159 views

Reduce image vertical spacing with text elements

I'm doing a .cls file and I want to reduce the spacing between the image and the title, the document looks like the following image The code for this, looks like this. \begin{figure}[h] ...
2
votes
1answer
575 views

Unwanted space between logo and title in titlepage

I have a problem that I can't resolve. I already did a title page using LaTeX but it contains many spaces between the logo of my school and the name of the school. This is my code please if any person ...
0
votes
1answer
223 views

Latex : spacing of Figures inserted as Tables

I have inserted 2 figures into my Latex document as a table, using a mini page, so that they are next to each other. When i turn it into a PDF document, the figures overlap. I would like to be able to ...
6
votes
1answer
406 views

Count number of lines in a caption

I have a problem formatting my captions for figures/tables. What should happen is the following: I need one line above the image and two lines above and below the caption. To make it look good, I ...
2
votes
1answer
363 views

Add a another row of images

I have a row containing three images. How do I add another row of images below the existing one? This is my code \begin{figure} \centering \subfloat[A ...
10
votes
1answer
548 views

graphics - dynamic image placement

This is a follow up to my post here: Graphics - Images off the page in multicolumn environment Using C#, XML, SQL, and LaTeX, I've managed to create a system which retrieves database information and ...
5
votes
1answer
803 views

Wrapfigure apparently creating dummy space on a following page

The example below is a newsletter with two news items. The first item has a wrapfigure to include a graphic. The second does not But the resulting PDF (made with PDFLaTeX) has a blank area close to ...
3
votes
1answer
1k views

Image in table covers horizontal line above it

I have a table with images in one of the columns. My problem is that the image overlaps the horizontal line above it, making it look bad. I first tried putting a \\ after each \hline, but this causes ...
8
votes
3answers
2k views

Border around figure does not fit

I want to insert a bitmap image in my document. I would like to put a tight and thin border line around the image. Apparently, the way to do this is with \framebox. I want to have the border fit ...
4
votes
1answer
441 views

Spacing using minipage in theorem environment (ntheorem)

Consider the following example and notice the different vertical spacings between the theorem caption and the text. Is there a way to get the same spacing when using minipage as in the case of normal ...
17
votes
3answers
578 views

How to replace all pictures by white rectangles?

I have a long document (800 pages) with lots of pictures (300 pictures). I have to produce a version of this document without the pictures (for copyright reasons). The solution I have found so far is ...
1
vote
1answer
314 views

Second figure on page is covering text in the bottom of the paragraph above

I'm trying to create a page which will have three figures on it as well as some text. However in my output the top of the second figure is obscuring the bottom of the text above it. I've tried using ...
3
votes
1answer
5k views

Control top and bottom margins of an image?

Using includegraphics seems to set default margins that gives a nice spacing between text and image. But I'd like to layout the text as close as possible to the image. How do I control the margins of ...
2
votes
1answer
115 views

3 pdf graphs on 1 page with text below

I am new to latex. I have to prepare a one-page document (so float is not important). I want to have 3 pdf graphs at the top of the page with 2 graphs centered on the first line and 1 graph centered ...
3
votes
1answer
1k views

Subfloating images with same margins left/middle/right

Currently I have the following code: \begin{figure}[htb] \centering \subfloat[htb][left]{\fcolorbox{plotBord}{plotPadd}{\includegraphics[scale=0.3]{figs/bla1.png}}} \hfill ...
1
vote
0answers
227 views

Get remaining height on page (and scale image to it) [duplicate]

Possible Duplicate: How to define a figure size so that is consume the rest of a page? Hi all, I've seen How to compute the remaining space on the current page - but that doesn't really ...
5
votes
2answers
3k views

Vertical space of \includegraphics[height=2cm]

I am trying to place an image on the right of some individual lines of text that do not stretch over the entire \textwidth. The image will go higher than the first line and I have to be able to ...