{spacing} is about both horizontal and vertical white space, e.g. space between letters or words, or space between paragraphs. For adjusting the space between the lines of a document, use {line-spacing} or -- if your question is specifically about the package of the same name -- {setspace}.

learn more… | top users | synonyms (2)

0
votes
0answers
12 views

In algorithm/algpseudocode, when writing long lines within loops how can I adjust the left indentation? [duplicate]

Q: In algorithm/algpseudocode, when writing long lines within loops how can I adjust the left indentation? To illustrate the problem, this is what I have: But this is more like what I want it ...
1
vote
1answer
135 views

Why the compiler ignores the command \noindent?

I am writing my master thesis on LaTeX. I should say that I had not used it before and everything is new for me. I was doing fine until I got some troubles when compiling the command \noindent and ...
2
votes
1answer
26 views

spacing in description with items wrapped in minipage

I'm trying to prevent items in description environment from breaking by wrapping each one in a minipage. (Perhaps that's not a good approach, but let's put that aside if we can for my question.) When ...
1
vote
2answers
56 views

Spacing in align environment

I am familiar with the \flushright and \hfill commands for positioning text to the far right of the page. However throughout my document I am using the terms (x\rightarrow\infty) on many lines and I ...
1
vote
0answers
36 views

Deal with too much white space

It happens quite often in long LaTeX files that LaTeX "tries" to fill a page, but because of various priority rules to theorem environments for example very much white space and large line spacing is ...
2
votes
1answer
46 views

CurVe document class: Adjust spaces between entries cross rubric or inside certain rubric without \vspace

I am using CurVe document class to create my CV. I want to know if there is anyway to adjust the spaces between the entries (\entry*[...]...) as indicated by the Figure 1. I know I can always put ...
3
votes
3answers
94 views

Unwanted space between lines

I was reading an article I wrote and I noticed unwanted spaced between lines. One such example is: I have highlighted the relevant section in red. As you can see, there is a bigger space between ...
0
votes
0answers
41 views

How can I slightly offset each character to acheive a movable-type letterpress look?

The lines of text in traditionally printed books aren't perfectly straight due to "wiggle room" between characters in the printing press. Can I create this effect with Latex? I'm fine with an ugly ...
2
votes
1answer
16 views

Change parskip in eledmac

When I try to adjust parskip in eledmac, it only takes effect when the paragraph starts with a label. For example: %!TEX TS-program = xelatex \documentclass{scrartcl} \usepackage{libertine} ...
3
votes
2answers
44 views

too much space for align if I use double space

I'm using a Latex template. They provide the following command for double space %% To produce output with the desired line spacing, the argument of %% \spacing should be multiplied by 5/6 = 0.8333, ...
3
votes
1answer
28 views

spacing between Japanese words (xelatex) [duplicate]

I'm working with Xelatex 3.14159265-2.6-0.99991 (TeX Live 2014/Arch Linux), compiling my .tex file and getting a simple .pdf file. I'm stuck on the following problem, occuring in a simple Japanese ...
5
votes
2answers
78 views

spacing in tikz

I'm trying to typeset the naturality property of the cap product, I'm hoping to achieve something like this: but the best I can do is something like this: \begin{equation*} \begin{tikzcd} ...
3
votes
0answers
38 views

How can I redefine \int to put a negative space after the integral sign, but keep the limits properly set?

I'd like to modify the \int command such that it adds an automatic negative space, e.g. \! after the integral sign. Preferentially, I'd like to be able to not edit any of my code, so cleverly ...
0
votes
0answers
25 views

how to reduce a gap between words in a title of bibliography and a dot over the bibliography numbering

I am writing a scientific paper using IEEE journal Latex template \documentclass{IEEEtran} \usepackage{comment} \usepackage{color} \usepackage{float} \usepackage{graphicx} \usepackage{ulem} ...
2
votes
2answers
41 views

Listings: add vertical padding without abusing frame

I have the following setup for my displayed listings: \documentclass[a4paper]{article} \pagestyle{empty} \usepackage{listings,xcolor,lipsum} \lstset{ backgroundcolor = \color{yellow}, ...
3
votes
1answer
32 views

Absolute Value of Horizontal Spacing in Numcases

I am interested in the absolute value of the horizontal spacing which is automatically assigned by numcases before an alignment point. For instance, what is the spacing after the comma and before ...
4
votes
1answer
99 views

Spacing after KOMA \section in multicol environment

I'm writing a two column paper using the KOMA scrartcl class and the multicol package. However, I start with a one column header, title and nomenclature section which take up most of my first page. In ...
7
votes
2answers
120 views

In which way have fake spaces made it to actual use?

I skimmed the abstracts of TUG 2014 and stumbled over "Fake spaces" with pdfTeX -- the best of both worlds by Ross Moore. The abstract says: With the 2014 version of TeX Live, new primitives are ...
1
vote
2answers
264 views

Where does this space come from?

Using colored text inside a minipage results in less vertical space being appended after the text compared to normal text. Strangely, this only occurs when the minipage is top-aligned. In the other ...
5
votes
2answers
164 views

How to adjust given lines automatically

Some of you may know the FlipBeamertheme by Phillip Tanedo (http://www.physics.uci.edu/~tanedo/files/code/FlipBeamerTemplate.pdf) I like the style of it's title. Tanedo used a picture: All three ...
1
vote
1answer
15 views

Adjusting horizontal spacing for the \hat and \vec symbols relative to the argument of \vec,\hat

I've done some intrusive changes using the unicode-math package to still use a font of my liking, a font which is not supported by TeX out-of-the-box. Passing more options to unicode-math causes it to ...
8
votes
2answers
69 views

Why does the spacing in math mode change when the text of a tikz node is centered?

Given two nodes with same content, for example $a = 1$, the spacing is different depending on the text alignment of the respective node, i.e. when the text is centered, the spacing is greater. The ...
3
votes
2answers
84 views

Customizing clean thesis

I am using the thesis template http://cleanthesis.der-ric.de/. In this template, there is no paragraph by default. As explained in Getting back the paragraph in cleanThesis?, the paragraph can be ...
6
votes
1answer
132 views

How to allow page breaks within footnotes, when using dblfnote?

Is it possible to let footnotes set in two columns with dblfnote break across pages? In the following MWE note 3 is so long that it goes to a second page together with the third paragraph, but I want ...
4
votes
1answer
35 views

Decrease spacing before chapter title in mwrep class

I thought it will be a piece of cake - I started with titlesec, but it ended up with: Non standard sectioning command detected(titlesec) Using default spacing and no format. Then I started ...
1
vote
1answer
29 views

Stopping a line break in list

I am writing a memo style document for my job that has to be formatted in a very specific manner, often without regard to good typesetting practices. I am relatively new to Latex, so I am having some ...
4
votes
1answer
54 views

Mysterious Vertical Space After Theorem/Proof Environments

I have defined my own theorem style to have 0pt above and 0pt below. For simplicity I have also set all other relevant spacings to 0pt. However, when I use a theorem or proof environment I get some ...
1
vote
1answer
23 views

How to fix the spaces of superscript text

I'm trying to typeset an old bible which has all the verses superscripted. I created a command that produces a superscript number corresponding to the verse number, and then this is increased by one. ...
1
vote
1answer
28 views

Removing white space beside images

I'm trying to display a bunch of images side by side. Originally I wanted them on the same line, but I got them to fit by putting 2 on the next line. I'd like to make the pictures bigger but the white ...
2
votes
1answer
57 views

How to remove vertical space before list in table cell?

I want to get very compact lists in table cells, but there is still a vertical space before the first list item (see screenshot below). How can I remove this vertical space? LaTeX code for example ...
0
votes
1answer
55 views

Change font spacing and size of bibunits \putbib

In the following example I would like to force my references section to be typeset in a smaller font with single (more condensed) spacing. My commands (a spacing environment call and a font small ...
1
vote
3answers
38 views

Additional space in p-type column swallowed by other cell

I want to add extra vertical space after table rows on a row per row basis. Consider the following MWE: \documentclass{article} \begin{document} \begin{tabular}{p{3cm}p{5cm}} Here... ...
0
votes
0answers
28 views

Chapter topmargin suddenly broken?

I just transfered a latex project to my new laptop and started compiling...everything is fine except the topmargin of chapters, it seems to be zero? I tried to change it with: ...
1
vote
1answer
34 views

Why are the skip lengths ignored in align?

I created a new command \mathloose that stretches the spacing in an equation by suitably adjusting \thinmuskip \medmuskip and \thickmuskip lengths. The command works just fine in \[ \] and \( \) but ...
3
votes
2answers
46 views

Adding horizontal labeled horizontal arrows in multicol environment

I have attached a picture of what I am attempting to create. The issue is, when trying to do this in Latex, I am messing up my spacing. I want to add a bold black arrow between the top two tables and ...
3
votes
1answer
35 views

Should \mathrm work in \gather* environment?

I am trying to use \mathrm in gather* environment, but the result is text without any spaces. How can I correct that, please? \documentclass{article} \usepackage{amsmath} \begin{document} ...
3
votes
3answers
115 views

How to add extra space inside of a table

I wrote a simple table with this commands: \begin{table}[h] \centering \begin{tabular}{| c | c |} \hline\hline \multicolumn{1}{ |c| }{Parametro} & \multicolumn{1}{ c| }{Espressione} \\ \hline ...
1
vote
1answer
34 views

First word hyphenation in parbox with strut

I've a problem with parbox spacing in combination with hyphenation. What I like to achieve is setting parboxes in a tabular-like way as key value pairs. So I have two parboxes with a given width per ...
9
votes
3answers
243 views

One single colored letter inside \spacedallcaps

I want to change the color of a single letter inside a custom \spacedallcaps command. This command makes the specified text uppercase and changes the letter spacing. When I introduce a ...
5
votes
2answers
72 views

Trouble with spacing between section title and equations

I am trying to create a formula sheet so I only have section titles and equations in my documents. I am having trouble with the spacing between my section header and the equations that I want as the ...
2
votes
1answer
63 views

Remove horizontal space from align and equation globally

I want to cram as many equations that I can in align environment. I was able to set the margins to zero and remove the space before and after the equations. Se below example code. However, currently ...
8
votes
2answers
76 views

Problem with subcaption spacing

When using the subcaption package to place tables1 side-by-side, the spacing between a table and its subtable caption is too small if the table caption is placed above the tables and the subtable ...
1
vote
0answers
12 views

two column style, text crossing middle [duplicate]

In my paper I wish to go for a two column style to "save pages" (there is an artificial limit of 8 pages, yet even by the prof said silliness of "prepared to wear glasses as long as it looks good"). ...
9
votes
1answer
190 views

\, does not work outside math mode in plain TeX

I read in several answers here that in LaTeX, \, works just like \thinspace outside math mode. However, that is not the case for plain TeX. $ printf '%s\n' 'a\,b\bye' > example.tex $ pdftex ...
3
votes
1answer
50 views

having trouble with indenting in an enumerate environment

This is my first time using tex to format an assignment, and I am having immense trouble making this work. \documentclass[12pt,a4paper,sans]{article} \usepackage[utf8]{inputenc} ...
2
votes
1answer
59 views

Creating figure with multiple images

how to create a figure of ( 4 x 4 ) images ? how can I manage the spaces between raws and colomns?
4
votes
1answer
38 views

How to Specify the space left of a table?

In my project I am using the xtab package. \usepackage{xtab} \begin{document} \def\hsa{\hspace{0.03in}} \def\hsb{\hspace{0.05in}} \def\hsc{\hspace{1.01in}} \def\hsd{\hspace{0in}} ...
4
votes
1answer
66 views

Spacing between paragraph of text and itemize list

My code from TeXworks below outputs a paragraph of text followed by an itemize list followed by another paragraph of text. Each paragraph is double-spaced, and the spacing within the text of each ...
1
vote
1answer
35 views

Spacing betwen centered text and prose

I have some left-aligned text followed by some centered text followed by a section of left-aligned prose. How do I make the space between the line of left-aligned text and the centered text (and then ...
1
vote
1answer
33 views

Adjust line spacing after new line

I would like to adjust the line spacing under a section when I add a new line. \setlength{\parskip}{} does not work because it only changes the spaces between sections, not between newlines (\\). ...