{subdividing} is about multiple/subdivided {bibliographies}, indexes or similar document elements. If you use this tag, add the appropriate general tag or preferably the tag of the specific package you use (e.g., {biblatex}).
1
vote
0answers
29 views
Two bibliography using thebibliography
I was happy with using \begin{thebibliography} \bibitem \end{thebibliography} (at the end of chapters of my thesis). I have added a new bibliography with continuous numbering (Manually numbering) at ...
4
votes
1answer
45 views
Sectioning bibliography by type (with multiple types per section)
I would like to distinguish books from articles, manuals, etc. This can be done by using:
\printbibliography[heading=subbibliography,title={Book References},type=book]
or
...
2
votes
1answer
49 views
Reversed name in shorthand division of bibliography
Using Biblatex with LyX I've managed to get a subdivided bibliography almost the the way I want it. The idea is to cite the key works with abbreviations that are conventional to my subject. For this I ...
2
votes
1answer
53 views
Getting divided bibliography with Biblatex
I'm writing my thesis in LyX using Biblatex.
Would it be possibly to get an output bibliography that is subdivided into one section with the work of my main subject (Wittgenstein) referred to with ...
2
votes
1answer
83 views
How to split bibliography into cited and non cited references?
I need to include my full bibliography into my report and the references I have used (in 2 separate sections)
I have my bib file attached to the document and the references are included at the end ...
5
votes
0answers
149 views
How to arrange references at the end of each chapter (in a Thesis)? [closed]
I am writing my PhD thesis and my supervisor has asked me to append the references at the end of each chapter. However, the template (which I am using) is unable to do so. I have downloaded this ...
1
vote
1answer
64 views
Proceedings bibliography problem - not displaying year, address and pages
I want to show proceedings information in the output PDF file using data from publications.bib. Particularly, I have a problem displaying year, address and pages.
...
5
votes
2answers
59 views
Bibliography in reverse order of entrance in .bib
When I type:
@ARTICLE{article1,
author = {AAA},
title = {New Method1},
year ={2013},
journal = {SuperJournal},
}
@ARTICLE{article2,
author = {BBB},
title = {New Method2},
year ...
2
votes
0answers
66 views
Disabling backref in secondary multibib bibliography with natbib
I am finalising my PhD thesis that I have composed with LaTeX.
I have a section in which I list my own publications and the whole list of references at the very end of the document. This list is ...
1
vote
0answers
24 views
Reference list and Bibliography [duplicate]
I am currently writing a paper and need to include both
a reference list {with items i have cited throughout my text}, and
a bibliography {with items i made reference too whilst doing the thesis ...
4
votes
2answers
80 views
Structuring the bibliography by headings and subheadings
In my Bibliography, I need two categories: Primary Sources and Secondary Sources. The first needs to be subdivided into Manuscripts and Published Works.
So, I thought I could use the following code:
...
1
vote
1answer
82 views
multibib - hyperref doesn't work for my second bibliography
I am using the multibib and hyperref packages.
I would like to create clickable citations for my bibliographies.
It works for the first one (biblio.bib) but not the second one (awebsite.bib)
Here is ...
3
votes
1answer
91 views
Problem with bibtopic package and sectioned bibliographies
I'm using LyX 2.0.1.5 on Windows 7 (MiKTeX 2.9.4813).
Since my thesis covers a very specific topic (QM of Retinal's Photoisomerization) I have to divide my Bibliography in two sections:
Essential ...
0
votes
0answers
93 views
TeXlipse, bibunits, and multiple bibliographies
I am using Eclipse 4.2 with TeXlipse 1.5 (the version bundled with StatET 3.2) and MixTeX 2.9. I have no problem using TeXlipse, bibtex, and natbib to produce bibliographies. But I often want to ...
0
votes
1answer
95 views
Small bibliography inside a document with its own bibliography [duplicate]
A document (class article) has a bibliography (using biblatex) printed at the end. But inside the document, a small section (call included section in my example) has its own bibliography (not part of ...
2
votes
1answer
280 views
Lonely \item - perhaps a missing list environment
My problem is:
I am using moderncv and splitbib on a mac. In Linux my file compiles fine. In the mac, however, i run pdflatex and bibtex all right, but when I run pdflatex again, I get the error
...
0
votes
1answer
116 views
Modular document: separate BibTeX?
I am building a modular LaTeX document for an econ journal. Each component of the modular document is one article. I want to have separate BibTeX references for each article.
First, I created a big ...
0
votes
1answer
71 views
I'm using multibib to have references at the end of each chapter but the numbering is wrong
I am using multibib to have references at the end of each chapter but when I have the same reference in multiple chapters, the numbering in the text corresponds to the last chapter that the reference ...
0
votes
0answers
83 views
All BibTeX references in each chapter show the same (first) one! [closed]
Writing a thesis, contains multiple chapters. Each chapter has a reference section in the end. Each reference is contained in a BibTeX file.
PROBLEM: The reference section of each chapter ...
3
votes
1answer
98 views
Biblatex/biber non-consecutive numbering references by type when using multiple bibliographies
I'm trying to have two bibliographies in one document. The first on is the normal references. And the later is intended to be a publication list and should be separated by type.
I managed to split ...
2
votes
1answer
89 views
specific citation style using multibib
I am using multibib with two bib-files. For the first one I use a numeric citation style. But for the second one I want to have [A1, A2, ...]. This works for my reference list but in my citation I ...
3
votes
1answer
129 views
Customising glossary group titles
I'm using the glossaries package to produce multiple glossaries in the same document and have found it convenient to define my own glossary style.
When makeindex is used the glossary is sub-divided ...
1
vote
1answer
79 views
hyperref and bibunits: link does not work
I often like to use hyperref to make references to theorems and articles in the bibliography clickable. However, I noticed that when I use bibunits, I can only click on links to theorems, not on ...
8
votes
3answers
158 views
Two Bibliographies: one for main text and one for appendix
I have a manuscript in which has the following structure:
Main Text
Bibliography
Appendix
However, there are citations which are only cited in the appendix, and they show up in the main ...
4
votes
2answers
72 views
Multibib & indentation
I use multibib to apply more than one bibliography in my document. The problem is when using more than 9 entrys, there occurs an indentation.
\documentclass{article}
...
0
votes
1answer
119 views
Get Publication/Poster List
I want to create a list of publications, posters and conference talks with LaTeX. As I can't distinguish these three reference-types by the classical BibTeX types (e.g. article, inbook,...) I though ...
3
votes
1answer
214 views
Multibib: how to reset references counter?
Im using a complex template to write my document. It is old and I'm having a problem. I have two separate reference list, "Internet References" and "Literature". The problem is that the references ...
2
votes
1answer
98 views
Multibib & Title of References
I use the multibib package to include more than one bibliographies into my document:
\documentclass[a4paper,10pt,twoside]{article}
\usepackage[resetlabels]{multibib}
\newcites{lit}{Literature}
...
4
votes
1answer
121 views
Read in number of citations from aux file
In the aux file produced by latex, I see the following line:
\newlabel{LastBibItem}{{30}{10}{}{}{}}
How can I pull the 30 (the total number of citations) into a counter in the preamble of another ...
3
votes
1answer
150 views
biblatex: Two .bib files with separate behavior in same document
I am having some trouble using biblatex with two bibliographies.
I am using the following option:
\usepackage[firstinits=true, isbn=false, url=false, doi=false, style=ieee, defernumbers=true, ...
4
votes
2answers
513 views
Including additional bibliography (publication list) in thesis
I have seen Multiple bibliographies (cited references + list of publications) and How can I include a bibliography at the end of each part of a book? but could find an answer.
I am writing a thesis ...
0
votes
1answer
71 views
Multiple Reference headings
I am new to latex. I have all my references contains in bibfile.bib. However, I have formatted my document to output separate bibliographies after each section. In my main tex file I have:
...
1
vote
1answer
268 views
Problems using \nocite with multibbl
I get some problems with package multibbl.
On one hand, if I write
\bibliographystyle{ref}{alpha}
\bibliography{ref}{books}
and anything more until \appendix, a new section or \end{document} I get ...
0
votes
1answer
57 views
How do I remove the title of the References section so I can use two lists?
I want to include two bib lists in a document.
The simplest way to do that, I thought, would be to use:
some text
\bibliography{file1}
some text
\bibliography{file2}
but this doesn't work and ...
1
vote
1answer
103 views
bibunits: cannot get it to work (no bu1 produced)
I am trying to use the package bibunits to have separate bibliographies for sections, chapters,...
I am using TeXShop on a Mac, and I just recently installed "TeX Live 2012".
I downloaded the file ...
14
votes
2answers
185 views
How can I have a word index for each chapter as well as a word index for the whole book?
In other words, just the way I get a table of contents at the beginning of each chapter with titletoc, I would like to have a word index at the end of each chapter.
(In addition to the index for the ...
3
votes
1answer
179 views
Suppress printing of only \bibentry references with natbib?
This question was basically asked before, but I think that the only answer didn't quite understand the question so I thought I'd try again. I'm writing a paper in which I need to have references show ...
4
votes
3answers
158 views
Inserting three minipages in the same line
I'm trying to insert three minipages, side by side, in a line, but I'm failing miserably.
Here's what I've been able to do so far:
% ...
5
votes
1answer
170 views
natbib: Split Bibliography Into Sections By Entrytype (without using multibib)
What's wrong with multibib?
multibib lets me split up my bibliography. But I have to specify manually (by \citeabc or \citedef), which bibliography entry belongs to which section. Also, it's not ...
4
votes
1answer
144 views
Add bibsection to toc (biblatex)
I used biblatex with sucess in Problems with biblatex to obtain multiple bibliographies by chapter and a global bibliograhy.
But i need add the bibsection to the toc
Contents
List of figures
...
9
votes
1answer
187 views
Glossary per chapter or section
I'm looking for a way of creating glossaries, with the help of glossaries package, per chapter or section.
In a particular glossary for section should be only the terms used in this section. If term ...
4
votes
2answers
283 views
Putting bibliographies at the end of each chapter
I have a project that requires that separate bibliographies be maintained for each chapter and that the references appear at the end of each chapter. I am using natbib and I know that I should be ...
5
votes
1answer
233 views
Possible to change sort order in natbib?
I have played a little with LaTeX lately and I really like it, it makes the document look top professional and makes structuring a report easy.
I am currently using it for a big assignment with lots ...
4
votes
1answer
87 views
splitbib and table of contents
I use the splitbib package to create two categories: primary literature and secondary literature. But I want to add in the table of contents an entry for each category, as if they are subsections or ...
5
votes
1answer
235 views
Per-chapter bibliographies in biblatex
I'm really new in using biblatex, compile the sample placed in Multiple bibliographies and one global bibliography - all with global labels, but what I get is
1.1 Foo
Some text [B02x ].
1.2 ...
2
votes
1answer
107 views
References by chapter and global references
I'm writing my thesis, but I need to get the bibliography for each chapter, and place a global bibliography at the end of the document. I use the
\usepackage[sectionbib]chapterbib, works well but I ...
2
votes
1answer
142 views
Remove heading from bibunit
I'm using bibunit to enter multiple bibliographies in a document. I don't want the bibunit to have a separate heading. I can remove the text with by redefining \refname, but this still leaves big ...
5
votes
2answers
2k views
How to create both list of abbreviations and list of nomenclature using nomencl package?
I have searched for the whole day online, but all the threads indicate only realizing one of the lists by using nomencl package. I want to create both list of abbreviations AND list of nomenclature ...
6
votes
1answer
111 views
How to render a normal and compressed version of the bibliography in one document?
I use biblatex and biber for the bibliography and I came to the problem that I need a subset of the bibliography to be in verbose style (all authors for 5 references) and at another place in the ...
4
votes
1answer
80 views
Separation of citations on two lists without packages
I have to separate my citations on two lists: Preliminary Work (Own Papers) and the standard Bibliography list. The references to the standard Bibliography list should be numbered and cited with ...
