2
votes
0answers
40 views

How to print a table and figure side-by-side in knitr

I see a lot of posts on putting figures side by side with tables without knitr, and posts about putting tables next to tables and figures next to figures in knitr, but nothing on how to put a figure ...
0
votes
0answers
29 views

How to use the outdated \subfigure package to align 3 images

I would like to create a figure that has 3 images, one large long figure on the left, and two small figures on the right, exactly like the image in this link: How to stack two subfigures next to a ...
2
votes
1answer
38 views

An alternative way to align figure and table in \subfloat

So I realise this has been asked/alluded to a couple of times previously as in: Figure and table side-by-side in subfloats Table and Figure side-by-side with Table caption above, Figure caption ...
1
vote
1answer
75 views

Positioning 4 figures in to two pair on one line [closed]

currently I have something that looks like; These images have come from epslatex plots from gnuplot. So my code looks like \documentclass{article} \usepackage{subcaption} \begin{document} ...
2
votes
1answer
70 views

How to make a non-float subfigure environment? [duplicate]

I am writing a document class report that has a maximum page limit. I tend to stay away from float environments for tables and figures since I like to have them where I code them in (I try [h], and ...
2
votes
2answers
47 views

How can I make the caption of each sub figure like

I have 6 figures, two classes, and want them to be arranged as Figure 1-C1 Figure 2-C2 (a) (c) Figure 3-C1 Figure 4-C2 (b) (d) Figure 5-C1 Figure 6-C2 (c) ...
2
votes
2answers
371 views

How to place two figures side by side in multicol

I would like to place two figures side by side in two column environment (Both figures fitting withing a single column) I have read the answers but it's not working for me. The figure is placed on the ...
2
votes
3answers
155 views

how to put odd number subfigures in multiple rows

There are five figures. Basically, I'd like them to displayed as following: |figure 1|figure 2| |figure 3|figure 4|figure 5| The first two figures are in the first row and the last three are ...
2
votes
2answers
86 views

Special arrangement of subfigures in memoir

As described in answers to this question, the following code: \documentclass{memoir} \newsubfloat{figure} \begin{document} \begin{figure}[H] \centering% \begin{tabular}{lr} \begin{tabular}{c}% ...
2
votes
1answer
100 views

subfigure placement incorrect with 4 figures

I am having an issue with latex placing my figures incorrectly. I have 4 related plots that I want to appear together as a single figure (with a,b,c,d sub-references). \begin{center} ...
1
vote
1answer
109 views

Subtables using r+hmisc

I'm not absolutly sure if it is the right place to ask my question. I use R+knitr to produce a weekly report(s) from a large database. For my tables I find very convenient to use hmisc's latex ...
6
votes
1answer
1k views

How to keep multiple figure together

I have 6 graphs that I have to keep together while showing. I have to make them almost same width as text width, otherwise the graphs will not be properly seen. So I cannot add them side by side but I ...
13
votes
2answers
544 views

How to draw 3 figures and have them side by side while they're connected

I would like to have 3 figures side by side, as in one of my previous posts. However, this time isn't the same. I would like to link my figures as below: My problem is not only how to put my ...
4
votes
1answer
292 views

Placing listing and figure side by side in memoir

I am writing a document using the memoir class where I want to place listings (with the listings package) and figures side by side. My first approach was to save the listing in a box and use subbottom ...
4
votes
1answer
296 views

Arrange four images with letter captions and vertical/horizontal separators

I would like to arrange four images in a similar style to this code taken slightly modified from Four Arranged Figures are offset . \documentclass{article} \usepackage[demo]{graphicx} % leave off ...
1
vote
2answers
153 views

Why don't these figures align horizontally?

I am trying to use the subcaption package for horizontally aligning up some figures, and I did as the documentation instructs me to do, yet the result is these are vertically aligned. It really ...
9
votes
3answers
220 views

Is the following layout possible with the subfigure package?

Is it possible to achieve the following layout with the subfigure package (and any other package/command I don't know about): ############# ############## # # # # # pic1 # # ...
4
votes
2answers
184 views

Two table environments side by side

I have the follown problem. In order to save space I want to place two different table-environemnts side by side. If I use subtable from the subcaption package I have the problem that the tables are ...
7
votes
2answers
875 views

How to arrage multiple figures?

I try to arrage multiple figures in one page, but I failed. I hope they display as follow: Any suggestion will be greatly appreciated.
1
vote
3answers
106 views

Force Big figure of 4x8 subfigures appear in one page

I have a big figure of 4x8 subfigures and i want to force it in one page as now it displays around 20 subfigures and the rest don't appear. Update: I have tried writing this in the line: ...
2
votes
1answer
106 views

Figure is put in the center of the page

I made a figure containing subfigures, but it keeps appearing in a whole page, so lots of white space. I don't know why. This picture explains what i mean: This is the code used: \clearpage ...
4
votes
1answer
210 views

Subfloats labeling

I'm working on a figure containing 30 figs, 5 rows 6 cols. What I want to do is: in the begining of every row of figure i want to write some text but i want it to be written vertical not horizontal. ...
1
vote
1answer
1k views

Figures in subfigure not aligned

I have 2 figures identical in size, I even aligned them myself in Illustrator, just to be sure, and when I put them in subfigure side by side, they are not horizontally aligned! The worst part is, I ...
5
votes
2answers
3k views

Table and Figure side-by-side with Table caption above, Figure caption below

A continuation of this question. I'm fighting a page-limit in a single-column layout and I need to put a Figure and a Table side-by-side and provide them with independent captions. However, the style ...
6
votes
3answers
365 views

How to place text and image above the exact subfigure?

I want to draw something like this: I am able to draw like this: This is the code for the same: \documentclass{article} \usepackage{tikz,subfig} \begin{document} \begin{figure} \centering ...
1
vote
1answer
137 views

How do i get the two circuits to display side by side?

\documentclass[11pt, a4paper]{article} \usepackage{fullpage} \usepackage{circuitikz} \usepackage{enumerate} \usepackage{SIunits} \usepackage{graphicx} \usepackage{caption} \usepackage{subcaption} ...
4
votes
1answer
200 views

Laying out subfigures with minipages

I want to place 3 subfigures in a figure with two columns. There is one big subfigured placed to the right. The two subfigures on the left should be aligned so that the first is aligned with the top ...
6
votes
1answer
312 views

How to stack two subfigures next to a third subfigure?

I'm using the subfigure environment to show 3 graphics in one figure environment. However, I'd like to arrange them in the following order (subfig1 is larger than the other two): | SUBFIG1 | SUBFIG2 ...
6
votes
2answers
1k views

Placing two figures (each having subfigures) next two each other

I would like to place two figures, where each figure has subfigures next to each other. I tried with minipage, but tex does not like the \subfigure as Not in outer par mode. Is there any way to place ...
7
votes
1answer
1k views

How to layout four figures with floatrow, two of them vertically?

how can I get a layout like the one below in my document? _____________ _____________ _______________ |Big Picture1| |Big Picture2| |Small Picture1| | | | | |______________| | ...
9
votes
2answers
5k views

Subfig label positioning

Can anyone tell me how to change the horizontal position of subfigure labels? I have: \captionsetup[subfigure]{labelformat=simple,position=top} Is there something like: {position=topleft} to ...
2
votes
2answers
11k views

How to create subfloat figures (two in first row and one below)?

I want to place three figures like this on the page: (a) (b) (c) How do I achieve this using subfloat or any other method in LaTeX? The three figures need to have a common caption and label. I ...
4
votes
1answer
315 views

Figure numbering IN figure

I'm using the subfig package which works like a charm. However, I only use the subfigure numbering (so no subcaptions, all the info will be in the main caption) but these are placed below the image ...
4
votes
1answer
548 views

Vertical placement of subfigs adjacent to another subfig

I have been using LyX, so I am fairly new to manipulating the underlying LaTeX. I have some images that I would like to arrange in a complicated fashion. The format I would like looks like | Fig_A1 | ...
3
votes
1answer
3k views

Issue with arranging subtables

In this answer, there is a code provided for neatly arranging subtables inside a table. I tried that out and got the following error: Missing number, treated as zero \begin{subtable}{0.5\linewidth} ...
5
votes
3answers
2k views

Position of figures

I have a question: can I put 3 pictures one beside the other in the same line? Actually I put them one after the other and I would like to put them in the same line if is possible. This is my code ...
6
votes
1answer
583 views

How to place two ctables side by side

ctable, not a regular table/tabular. How can I get two narrow ctables to go side by side? I want them to be subtables of a larger table, just two independent tables side by side. I've tried using a ...
6
votes
1answer
2k views

Change caption width together with subfloat

In the following code the package that give the problems is \usepackage[font=small,format=plain,labelfont=bf,up,textfont=it,up,width=0.85\textwidth]{caption} What I want to do is change ...
0
votes
1answer
1k views

Subfloat caption in wrong position

My subfloat command is standard and simple: \documentclass[12pt]{article} \usepackage{graphicx,subfig,caption} \begin{document} \begin{figure}[h!] \centering ...
11
votes
2answers
3k views

How to build and combine sophisticated layouts in figures

How can I get a layout like the one below in my document?                 With this question, I am looking for: An ...
4
votes
1answer
2k views

Two diagrams side by side

I am trying to put two feynman diagrams side by side, but they get displayed below eachother. I am using feynmf and subfloat. This normally works for pictures. \begin{figure}[ht!] \centering ...
1
vote
1answer
3k views

How to put subcaptions below subtables, and increase gap between subtables with 'subfigure'?

Using 'subfigure', how can I create subtables within a table, such that a) subcaptions are underneath each subtable, and b) there's a reasonable horizontal gap between the subtables? So far I've only ...
11
votes
2answers
972 views

How can I put the empty subfloat subcaptions to the right?

I'm putting two figures above each other with \subfloat from the subfig package. Their captions are empty as I just want to describe the figures with the main caption, but I still want the (a) and (b) ...
8
votes
3answers
169 views

figure next to a barplot

Okay, I tried a lot of things and can't really find it anywhere. Is there a simple example code for how to put a picture next to a graph? I tried to play around with hspace and vspace as well as an ...
14
votes
3answers
3k views

Special arrangement of subfigures

I need an image with five subfigures arranged this way. I have tried to use subfig and floatrow, but I haven't been able to place the figures as I need them
3
votes
1answer
1k views

Putting equations next to each other when there's room (i.e. math mode in subfigure)

I have a group of multiline formulas (with \begin{split}) of varying heights and widths in a float and there's a lot of unused horizontal space. I'd like the equations to go next to each other when ...
1
vote
1answer
3k views

Subfigures placed horizontally

I want to place two or more figures on top of the two-column page next to each other (horizontally). However, for some reason I can't do this. This is the code that I use, it puts the second figure in ...
2
votes
1answer
3k views

Alignment and scaling of nested subfigures

Update: Read this first I originally asked this question to find out how I would show a large image with magnified portions of the same image next to it. I was doing this by manually cropping copies ...
3
votes
1answer
2k views

2x3 images spanning over a two column text

I am trying to align 6 figures in a 2 by 3 organization over a two column text, but all my tries are in vain, the figures end up vertical. I've also tried minipages but no luck. the tex: ...
1
vote
0answers
236 views

subfigure, 1 big on the left, 2 small above each other on the right [duplicate]

Possible Duplicate: Help aligning tables. How to place with the package subfigure or subfig 3 subfigures as indicated in the title: 1 big on the left, 2 small above each other on the right? ...