{subfloats} is about small "sub"-figures and "sub"-tables within a single (floating) figure or table environment. For questions specifically about formatting a subfloat's caption, consider to use {subcaption}.

learn more… | top users | synonyms (2)

103
votes
3answers
37k views

subcaption vs. subfig: Best package for referencing a subfigure

On this question, a comment by Martin H says: that one should forget about the subfigure and subfig packages and use subcaption. As subfig replaces subfigure, no argument there. I am currently using ...
66
votes
4answers
59k views

Two figures side by side

How can I put two figures side-by-side? Not two sub-figures, but two actual figures with separate "Fig.: bla bla" captions. A figure is supposed to spread over the entire text width, but I have two ...
85
votes
4answers
10k views

How to create magnified subfigures and corresponding boxes for portions of a large image

Updated Below I hope the title gets at what I'm trying to do. I have a large image for a thesis on an image processing topic, and I want show the large image, with zoomed in boxes (typically with the ...
4
votes
1answer
178 views

package subfig adds overwriting label in list of figures

As said above, this MWE \documentclass{book} \usepackage{lipsum} \usepackage{subfig} % this breaks list of figures with overwriting labels \begin{document} \mainmatter \lipsum \begin{figure} ...
5
votes
1answer
3k views

Two diagrams side by side

I am trying to put two feynman diagrams side by side, but they get displayed below eachother. I am using feynmf and subfloat. This normally works for pictures. \begin{figure}[ht!] \centering ...
1
vote
1answer
14k views

Miktex Package Installation

I recently installed MiKTeX with the texmaker editor and cannot figure out how to update the packages. When I attempt to use the subfigure package with the following preamble ...
24
votes
4answers
43k views

Reduction of Space between two Sub-figures

I want to reduce the space between two subfigures and use that space to make those subfigures large. How to do that? My code is as follows: \begin{figure}[htp] \centering ...
17
votes
4answers
9k views

Adding parentheses around subfig references

Say I have a figure with two subfloats inserted using the subfig package. When I reference them with \ref{myLabel} I get this Figure 3.5a and 3.5b. But what I want is this: Figure 3.5(a) ...
11
votes
1answer
13k views

ContinuedFloat, and Subfloat

In my thesis I have a lot of figures with a common caption and multiple subfigures (a,b,c..etc). I wanted to split them between the pages because I don't want to fit them all in one page, therefore I ...
7
votes
3answers
28k views

Placement of images in row using subfigure

I want to put four figures in a single row. The code I am trying to use is taken from http://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions. This puts three figures in a row. When I add a ...
5
votes
2answers
8k views

Table and Figure side-by-side with Table caption above, Figure caption below

A continuation of this question. I'm fighting a page-limit in a single-column layout and I need to put a Figure and a Table side-by-side and provide them with independent captions. However, the style ...
16
votes
3answers
7k views

Vertically align subfloats at the top while having subcaptions vertically aligned below the subfloats

I have a float with two subfloats: I want the circles to be vertically aligned from their top such as in the following figure. But I don't want the subcaptions to be placed above the subfloats but ...
4
votes
2answers
253 views

Automatic scaling of tikz images in floatrow

I have multiple images in a row (using floatrow) and would like to scale them, that they fill the row, while their top and bottom edges are flush to each other, and the aspect ratio of the images them ...
15
votes
4answers
18k views

Placing Subfigures vertically

I want to use subfigures to place three figures like this: The following is the code I used: \begin{figure} \begin{tabular}{|c|c|} \hline \multirow{2}{*}{ ...
13
votes
2answers
12k views

Subfig label positioning

Can anyone tell me how to change the horizontal position of subfigure labels? I have: \captionsetup[subfigure]{labelformat=simple,position=top} Is there something like: {position=topleft} to ...
28
votes
2answers
27k views

subfigure and subfig packages deprecated

I was using the subfigure package to align multiple small images in a document. However, WikiBooks states that "the subfigure and subfig packages are deprecated and shouldn't be used any more" ...
13
votes
3answers
31k views

How to vertically align 3 images with subfigure?

This code: \begin{figure*}[t] \begin{center} \begin{subfigure}[a]{0.3\textwidth} \label{im:device_front} \includegraphics[width=\textwidth]{images/bsn_side} ...
10
votes
3answers
545 views

Is the following layout possible with the subfigure package?

Is it possible to achieve the following layout with the subfigure package (and any other package/command I don't know about): ############# ############## # # # # # pic1 # # ...
9
votes
1answer
4k views

vertically align different size images in a figure* environment

I have an figure* environment with the following \begin{figure*} \centerline { \subfloat[1]{...} \subfloat[2]{...} } \end{figure*} The images are different heights. How can I ...
2
votes
1answer
2k views

subfigure placement incorrect with 4 figures

I am having an issue with latex placing my figures incorrectly. I have 4 related plots that I want to appear together as a single figure (with a,b,c,d sub-references). \begin{center} ...
26
votes
3answers
31k views

Splitting subfigures across multiple pages — but programmatically!

I am using the subfig package to make many subfloats in a figure environment. It works well, as long as you realize that it tracks the whitespaces within the float environment. It also has an option ...
16
votes
3answers
8k views

Put subfigure labels inside figures using subfig package

I'd like to put subfigure labels (a), (b), etc., at the top left corner of subfigures like the following figure: I know there are some workarounds like this post (with stackengine) or this post ...
13
votes
1answer
12k views

Is it possible to make a reference to a subfigure to appear Figure 2(a) with cleveref?

I am new here, and also new to LaTeX, so apologies if I have included too much or too little! I have been using the subfig package, and just today added in cleveref. The subfig package labels my ...
18
votes
3answers
81k views

how to put subfigures in several rows

basically i need something like rowspan option in html table. I want that an figure 3 and figure 4 occupy three rows, I need a layout something like this: |figure 1 | figure 2 ...
5
votes
2answers
4k views

How can I put lstlisting block into subfloat block?

I'm trying to compile my document but it's exploding. I've narrowed it down to this section: \begin{figure}[h] \caption{These are my awesome code snippets} \subfloat[This code runs every cycle.]{ ...
28
votes
2answers
12k views

What is the difference between \subfigure and \subfloat?

I've been just reading through this Latex wikibook and I spotted they advocate use of \subfloat in figures. I've always used \subfigure. What is the difference?
7
votes
2answers
3k views

Subfigures with number inside figure

I like to have 3 (or whatever number) images and I like them to be as subfigures with numbering a), b), c) and so on: Here, the numbering is done manually and I wonder if there is a way to let LaTeX ...
2
votes
1answer
4k views

Alignment and scaling of nested subfigures

Update: Read this first I originally asked this question to find out how I would show a large image with magnified portions of the same image next to it. I was doing this by manually cropping copies ...
10
votes
2answers
23k views

Text next to image

I have a problem to get the following result in LaTeX: The figure is not something I want to do with tikz, but I want to use \includegraphics{figure1.png}. Can someone help me to get this?
8
votes
2answers
5k views

Place four algorithms (algorithm2e) in a subfigure and arrange them in two rows and two columns

I want to arrange four algorithms set with the algorithm2e package in two rows and two columns, as shown in the figure below. I've tried the subfigure package and have also read several related ...
6
votes
2answers
897 views

Help aligning tables.

I need to align 1 table to the right and two to the left, the layout I want to achieve is something like this: \begin{figure} \centering \subfloat[]{% \begin{tabular}[b]{cc} \hline 0 ...
1
vote
2answers
7k views

Subfigures placed horizontally

I want to place two or more figures on top of the two-column page next to each other (horizontally). However, for some reason I can't do this. This is the code that I use, it puts the second figure in ...
4
votes
3answers
10k views

Figure and table side-by-side in subfloats

A very similar question has been asked before: Table and Figure side-by-side with independent captions I'm trying to accomplish this, but while using the subfig package. The image below depicts ...
1
vote
1answer
5k views

How to put subcaptions below subtables, and increase gap between subtables with 'subfigure'?

Using 'subfigure', how can I create subtables within a table, such that a) subcaptions are underneath each subtable, and b) there's a reasonable horizontal gap between the subtables? So far I've only ...
30
votes
2answers
108k views

Insert multiple figures in Latex

I need to insert 10 figures (in two columns- side by side) in LaTeX that will have one global caption, but also I need to name each figure (1a, 1b, 1c, ... ect.). So they will look like: 1a ...
16
votes
1answer
20k views

Referencing subfigures in main caption (with \subfloat and \subref)

I've used subfloat to include subfigures, with their relevant labels but with empty captions. what I'm going to do is to reference these figures with \subref in the main caption of the figure. But ...
17
votes
2answers
22k views

Multi-page Figure with subcaption package

I have a figure with subfigures defined using the subcaption package (*not the deprecated subfig or subfigure). I need the parent figure to span two pages with two subfigs on each page. I have ...
17
votes
2answers
6k views

How to build and combine sophisticated layouts in figures

How can I get a layout like the one below in my document?                 With this question, I am looking for: An ...
11
votes
1answer
11k views

3 or 4 tikz figures side-by-side

How could I have a figure with 3 or 4 subfigures side-by-side in the same row? I've tried it once but the best I had was only 2 subfigures side-by-side in the same row. My code so far is: ...
17
votes
3answers
6k views

Special arrangement of subfigures

I need an image with five subfigures arranged this way. I have tried to use subfig and floatrow, but I haven't been able to place the figures as I need them
10
votes
1answer
6k views

Aligning a figure and table side by side

I would like to place a figure side-by-side with a table, and have both of them aligned to the top. This is what I came up with: \begin{figure} \begin{minipage}[b]{0.65\linewidth} ...
6
votes
1answer
3k views

Ruled Algorithms in columns/minipages

I'm using Benoit Guillon's algo styles for Lyx (at http://bgu.perso.libertysurf.fr/) in 2.0 to get nice algorithms ruled with line numbers. This is just a wrapper for the algorithm and algorithmic ...
6
votes
2answers
2k views

Placing two figures (each having subfigures) next two each other

I would like to place two figures, where each figure has subfigures next to each other. I tried with minipage, but tex does not like the \subfigure as Not in outer par mode. Is there any way to place ...
6
votes
1answer
143 views

Arrange images as tables or subfigure or some other layout

How to layout images like the attached picture? Should I arrange them as tables or subfigure or some other layout? Thanks. This is my latex code: \begin{figure} \centering ...
8
votes
1answer
4k views

Centering a subcaption

I have three figures that I want to place next to each other. That is fine. In addition, however, each subfigure has a caption on its own and the crucial thing with these is that I have to have two ...
5
votes
1answer
826 views

How can I vertically align subfigures of different size without affecting subcaptions?

Please consider the following MWE \documentclass{article} \usepackage[demo]{graphicx} \begin{document} \begin{figure} \centering \begin{minipage}[c]{0.45\textwidth} \centering ...
5
votes
1answer
999 views

How to \ref to subcaption numbers (a, b) when using memoirs subcaptions?

How can I get references to subcaption numbers when using memoir? In this example: \documentclass{memoir} \newsubfloat{figure} \begin{document} \chapter{Lorem} \section{ipsum} \begin{figure}[b] ...
3
votes
2answers
4k views

Vertical alignment with subfig and pstricks

I'm working with pstricks to add illustrations to a paper, as I found that it allows me to save much time compared to editing files with dia/xfig/visio/etc. and including pngs. But I'm having a few ...
22
votes
2answers
34k views

Figures: What is the difference between using subfig or subfigure [duplicate]

I tend to use \subfloats[]{} in my figures when I want to list multiple labelled figures of similar content in one bigger picture. However, I see that some people use \subfigure. What is the ...
7
votes
2answers
9k views

How to put two images next to each other with a) and b) labels?

I want to put two images next to each other and in order to do that I have written these code: \begin{figure}[h] \begin{minipage}{16pc} \includegraphics[width=16pc]{P_1.eps} \caption{\label{fig4} ...