{subscripts} are smaller characters appearing set slightly below the normal line.

learn more… | top users | synonyms (1)

4
votes
1answer
100 views

Standard for typesetting mathematical objects other than variables

Is there a standard in mathematics for typesetting the textual (not symbolic) identifiers of mathematical objects other than variables? Textual identifiers of mathematical objects other than ...
6
votes
4answers
173 views

Superscript/subscript fonts different from body font

The following minimal example: \documentclass{article} \renewcommand{\familydefault}{\sfdefault} \begin{document} 10$^5$ and CO$_2$. \end{document} produces the following: The superscript and ...
4
votes
1answer
27 views

File ended while scanning use of \multicolumn

I used http://www.tablesgenerator.com/# to create this table and loaded all of the needed packages. But it stil doesn't work. I really need this for my thesis. Can someone please help? My code is the ...
5
votes
3answers
153 views

Subscript on $\rangle$

I am trying to get the subscript on $\rangle$ just right: To me $\rangle_G$ puts the G too high, and things as $\rangle_{_G}$ or even $\rangle_{\substack{\\G}}$ do not get it right. Is there any easy ...
1
vote
0answers
35 views

How does `unicode-math` correct super-/sub-script positioning?

From my understanding, unicode-math primarily relies on the data in the OpenType MATH table to properly typeset each font. However, in most of the OpenType fonts I have examined (including the ones ...
0
votes
2answers
34 views

Question about font size of a subscript

I am working on a formulae in a notes. Here is part of my code, \begin{equation*} \phi(x) := \left\{ \begin{aligned} ...
1
vote
1answer
47 views

How to subscript a single quotation mark?

I can do: \emph{f$_i$$_j$} to get fij But how do I get fij'? I've tried: \emph{f$_i$$_j$$_'$} But it didn't work.
4
votes
2answers
31 views

Change size of font of subscript of underbrace in align environment

I would like to have a bigger subscript S under the underbrace in the following equation and appreciate your help. \begin{align} K&=\frac{E}{(1+i)^r}\cdot \underbrace{\left ...
2
votes
1answer
43 views

Fixing the vertical position of subscripts

When I write $\chi_V$ the subscript outputs too high for my taste. Is there a way I can set the vertical position of subscripts for the whole document? Many thanks
3
votes
1answer
109 views

Kerning super- and subscripts “semantically”

I want to know if it's possible to change how LaTeX typesets superscripts and subscripts (separately, that is, not both at once) for an element where the default kerning doesn't cut it for me. Some ...
3
votes
2answers
63 views

Adjust custom made upright greek letters when used in subscripts

I really like how Steven is generating upright greek letters in his answer: \documentclass[a4paper]{article} \newsavebox{\foobox} \newcommand{\slantbox}[2][0]{\mbox{% \sbox{\foobox}{#2}% ...
1
vote
2answers
44 views

Double subscript not coming with product in this formula

I am not able to write this in latex with the subscript p|n (maybe more than one line) under the product and above the product sign also I need something to be written( say k). Moreover it would be ...
0
votes
2answers
32 views

pderiv square macro [duplicate]

How do I update the macro for partial derivative in order to accept standard second or bigger order? I have so far \newcommand{\pderiv}[2]{\frac{\partial #1}{\partial #2}} for the first order ...
4
votes
1answer
44 views

Using custom-aligned subarray in LyX

I need to write a vertically stacked subscript in a notation meant to say "evaluate expression at k=..., and k'=...". In the end it should look like / SOME \ | BIG | \ ...
2
votes
1answer
42 views

How do I strike out indices? [duplicate]

I want to strike out the superscripts and subscripts for an expression like $$\Gamma^{\lambda}_{\mu\nu}$$ I tried the ulem package: \usepackage[normalem]{ulem} \sout{Hello World} and the soul ...
1
vote
1answer
77 views

VIM Latex Suite repeating symbols with subscripts and superscripts

I have a document that needs a lot of symbols in math environment, that have both superscripts and subscripts like x_1^1, x_1^2, x_2^1, x_2^2, with different bases. x could be y, z, etc.... Having to ...
8
votes
2answers
96 views

\bigl and \bigr in sub/superscripts

When typesetting expressions with multiple adjacent parentheses, I like to use \bigl and \bigr on the outermost parentheses to make it easier to read, especially with 3 or more parentheses in a row. ...
3
votes
1answer
54 views

Why are my subscripts with \ref too big? Only happens on arxiv pdf

Why are the subscripts on constants too large in the following arxiv paper? http://arxiv.org/pdf/1502.00822v1.pdf This happens only on the arxiv, not when I compile the document at home or at work. ...
0
votes
1answer
24 views

Equal sign incorrectly aligns with subscript

If I type \mu_\bar{x}=\mu_x Then the equal sign aligns with the subscript \bar{x}. However, what I want is align the equal sign with the mu, which is the big character, on the left side. How ...
3
votes
1answer
25 views

Subscript not aligned when there is superscript

For example, A_{P_{i+1} P'_{i+1} P'_i} gives me something like this: Right now I just add ^{ } to the first P to solve this problem. This there a systematic way to deal with this?
6
votes
1answer
46 views

Multiple subscript style

I need to write some multi-lower index equations. My goal is to get something like this: Unfortunatelly, when I use normal "_" then I get this: Edit: \documentclass{beamer} ...
0
votes
0answers
23 views

Automatically apply \textnormal to subscripts [duplicate]

I almost always require my subscripts to be in normal font i.e., `$A_{\textnormal{b}}$` rather than `$A_{b}$`. Is there a way I can make this happen through out the document ...
2
votes
1answer
26 views

Aligning Mortality Two-sided Subscripts

MWE: \documentclass[11pt, twoside]{article} \usepackage{amsmath} \begin{document} ${}_{10}q^{1}_{30:40} = 0.17$ \end{document} Is there any way I can align the subscripts on the left and right ...
3
votes
5answers
245 views

How to write below bullet

I have to write something under the symbol \bullet in Latex. Is it possible? I'm using the class beamer. Here it is an example of a frame: \begin{frame} \begin{itemize} \item<1-> Products ...
4
votes
2answers
84 views

esdiff package for easily writing derivatives cannot handle subscripts properly?

Here's a MnWE: \documentclass[12pt,letterpaper]{article} \usepackage{lmodern} \usepackage[T1]{fontenc} \usepackage{amsmath} \usepackage{esdiff} \begin{document} $\diffp{V}{c_i}$ \end{document} ...
2
votes
1answer
32 views

Underscripted Equals Symbol

Is there a non-crazy way I can implement a simple = sign with a condition/scope written under it? In particular, (expr1) = (x->a) (expr2), where (x->a) is written like in a limit, under the ...
4
votes
0answers
39 views

\textsubscript no longer works with xetex [duplicate]

The command \textsubscript used to work with xelatex (at least until sometime in the fall of 2014), but now it throws this error: ! LaTeX Error: Command \textsubscript unavailable in encoding EU1. ...
5
votes
1answer
67 views

Pre subscript versus tensor

What is the best way to typeset \sqcup with two subscripts left/right. For sure, 1st and 2nd are wrong. But they help us to see the baseline for the indexes. The 3rd and 4th look equal except by the ...
0
votes
1answer
40 views

multi character subscript in a superscript

How to put a subscript in a superscript Shows hows to write simple subscript to a superscript like this \sum_{w=0}^{w_i}f(x) and that works. What I need is a complex subscript. Like ...
2
votes
0answers
66 views

How should I typeset the complex conjugate of a subscripted variable?

I have a variable $z_{2n+1}$ and I want to write the complex conjugate of it. I am not sure which of the following should be preferred: \bar{z}_{2n+1}: The bar is not so large and may be hard to ...
0
votes
0answers
32 views

\textsubscript undefined in Beamer? [duplicate]

Beamer tells me \textsubscript is undefined. Isn't it a core LaTeX command? How can I use the command in Beamer? This example throws "undefined control sequence" errors and does not subscript the ...
0
votes
1answer
63 views

“Double subscript” error in “align” environment

I saw some questions about "double subscript" but I have a weird situation. I have the following parts in my code: and... I have used almost the same subscripts in both of them, but the latter ...
3
votes
2answers
129 views

How to place the subscript under two summation signs in a fraction?

I would like to place a subscript under two summation signs in a fraction, in an equation. The code showed works when it is not in a fraction, but as soon as I use it in a fraction the subscript is ...
9
votes
2answers
113 views

raising subscript with mhchem

I've tried to define a macro with staggered sub- and superscript and added a formula with mhchem to the superscript. the typesetting seems misaligned especially the subscript seems to be typeseted to ...
7
votes
1answer
144 views

Why does using color break superscript/subscript horizontal spacing?

The below snippet, within an equation array environment, gives the subsequent rendering: F\left[C^{(n-k)}_{P_{ji}}\right] But when I add color to the snippet (using the color package) as below ...
1
vote
1answer
43 views

Making the subscript under the summation [duplicate]

I'm writing some formulas inside a tabular. My formulas have summation but the subscript is showing next to the summation not under it! How can I make it under it? Example (j is next to summation!): ...
1
vote
2answers
36 views

How to correctly use multi line subscripts

So, the problem is simple: $\min_{\begin{array}{c} x\\ y \end{array}}f$ how to adjust the space between ...
1
vote
1answer
41 views

Lualatex: several levels of subscripts in a sum [duplicate]

I would like to have several subscripts in my sum, like "sum over all i but not for i = 3". I have tried using \subscript from amsmath but failed with undefined control sequence. I've also failed to ...
2
votes
1answer
44 views

Change horizontal spacing for subscripts in equation environment

I would like to adjust the spacing prior and after a subscript to reduce the required horizontal space. With this small mwe \documentclass{scrbook} \usepackage{amsmath} \begin{document} ...
2
votes
1answer
94 views

Problem with math superscript and subscript in arabxetex

I would like use math superscript ^ instead of \sp in mathematical formulae in an Arabic environment when using arabxetex. Unfortunately it doesn't work, see the below example. Is there a way to solve ...
0
votes
0answers
75 views

font size of sub- and superscripts

I got a problem with the font size of my sub- and superscripts. In my opinion, they are a bit too big and look quite unproportional. Is there a way to decrease the font size of sub- and superscripts? ...
2
votes
1answer
59 views

Text subscript within math environment ($$)

How can I make a subscript of 'p' in fp(x) = ... I have this code right now, but I think there's a better way: $f\textsc{$p$}(x)=x^3-x^2+px+1$
3
votes
1answer
89 views

breqn and subscripts and curly braces

When using the package breqn I got some compile errors. Without the package this works just fine. (I am using xelatex.) \documentclass[a4paper,12pt]{scrbook} \usepackage{breqn} ...
3
votes
1answer
72 views

Vertical positioning of superscripts with different heights

I'm trying to format some Clebsch-Gordan coefficients to look like this i.e. a normal C followed by a 2x3 array (using super/subscripts; not an actual LaTeX array) of indices. But instead of j_1, ...
5
votes
2answers
107 views

subscripts with capital Letter adjusting [or etiquette]

Sometimes some .tex features or standards seem strange at first glance. One actual case for me are subscripts with capital letters (obligatory because the letters on subscripts came from acknowledged ...
2
votes
2answers
113 views

Overline over a symbol with an index

For example, if I want to write a closure of a set, which is denoted A_1, should I use $\overline{A_1}$ or $\overline A_1$ (or something completely different)? For me, the more logical choice seems ...
2
votes
0answers
38 views

problem using subscripts with sansmath

I have had to (hastily) adapt some Latex to sans serif and I have had some small problems. I cobbled a preamble together (lifting some stuff from the web) which seems to work, except for some small ...
5
votes
2answers
118 views

How to correctly typeset subscripts after \varphi?

I'm using $\Delta\varphi_R$ in several locations in my document, but the subscript has almost the same size and vertical position of the variable. Is there a way to make it look more like a subscript? ...
6
votes
3answers
153 views

Mathtools: using substack to align limits

I want to align the limits of a sequence at the equal sign but have an optional modifier before the substack. When I add this optional modifier, the limits are distorted since the modifier is placed ...
4
votes
1answer
80 views

Centering \dot in a symbol macro (\listofsymbol)

I was trying to achieve the results of get a variable listed in listofsymbol's generated list, when called with a -dot suffix. If was trying also to find a way to center dot in variables with ...