{subscripts} are smaller characters appearing set slightly below the normal line.

learn more… | top users | synonyms (1)

8
votes
2answers
248 views

typesetting 2 line conditions over which is summed

I am trying to typeset the formula below in a way that m_j=m_i and z_j=z_i have the same scriptsize, the = are aligned, and j: is before both, larger and with vertical position between the lines. How ...
2
votes
1answer
461 views

Using \emph and a subscript

How would I go about adding a subscript to a symbol I'm defining from an equation. For example I have an equation E_m = \alpha_m x + y How can I then do something like \emph \alpha\textsubscript{m} ...
4
votes
2answers
203 views

How to make the amsxtra \accentedsymbol work with subscripts etc.?

The amsxtra package provides the \accentedsymbol command which typesets the argument and stores the result. This can speed up LaTeX compilation significantly if lots of accents etc. are used ...
5
votes
1answer
706 views

Squeeze superscripts and subscripts around bracketed expressions in display math

Consider a bracketed term in display math, like this. Is there any way to squeeze the space between the super/sub-scripts and the bracketed term? e.g. where I've modified the image to create the ...
5
votes
1answer
731 views

starred version of \DeclareMathOperator not working

I am using Kile as my LaTeX editor. I have defined a star for DeclareMathOperator but it does show the behavior of \limits, the subscript appears only in the sides rather than below. But using maptop ...
8
votes
2answers
1k views

Subscript vertical position dependent on presence of superscript - how to change? [duplicate]

Possible Duplicate: Subscripts for primed variables If I have a variable which is always subscripted but only sometimes superscripted, the vertical position of the subscript varies. For ...
3
votes
1answer
586 views

Subdepth subscripts not aligned

I was under the impression that the subdepth package would even out the depth of subscripts, but I just tried the following code in which the subscripts are not "aligned": \documentclass{article} ...
5
votes
0answers
366 views

How to lower the superscripts (and raise the subscripts) [duplicate]

Possible Duplicate: tex4ht problems with footnotes I am preparing a document using XeLaTeX, unicode-math and Asana Math OTF (turned on by \setmathfont{Asana-Math.otf}). I've noticed that ...
8
votes
1answer
248 views

\vec{p_{\bar p}} renders strangely

When I do: \vec{p_{\bar p}} I get: instead of with the \vec shifted over a bit. Why does this happen? (Also, \vec{\mbox{p_{\bar p}}} renders identically, even though \mbox{p_{\bar p}} looks ...
6
votes
1answer
411 views

Redefine the default depth of superscript and subscript document-wide

The behavior of subscript and supscript operator _ and ^ is like a blackbox to me, I am curious if I could redefine the behavior of them globally for a document. I searched the forum and found ...
5
votes
1answer
295 views

special symbol for matrix index l

In the following image there are two different styles used for matrix index l. The first one is the default one. How can one get the second one? The code is for the first equation is ...
19
votes
2answers
920 views

Placement of subscripts using unicode-math. Is it XeTeX bug?

I don't like placement of subsripts when using unicode math fonts under XeLaTeX. In contrast to CM fonts the subscripts are placed at different vertical positions obviously depending on the depth of ...
1
vote
1answer
178 views

A macro which is similiar to \prescript but it can be used in text mode

How to define a macro, say \pretextsuperscript, to get a presuperscript ahead a word in text mode? Just simply write \textsuperscript{2}hormone and \textsuperscript{2}population is incorrect. Why say ...
3
votes
2answers
3k views

Writing a limit so that the subscript goes directly underneath

When I write $\lim_{x \rightarrow p} f(x) = q$, the subscript x \rightarrow p appears to the right of the limit, instead of directly underneath it. When I try $\displaystyle \lim_{x \rightarrow p} ...
10
votes
1answer
857 views

Removing extra space with \pmod command

When using the \pmod command as a subscript to a sum, I often encounter some extra unwanted space. For example, writing \[ \sum_{n \equiv 1 \pmod{k}} ... \] produces the following image: Does ...
15
votes
1answer
16k views

Double Subscript for Subsequences

What's the best way to write subsequences? $x_n_i$ gives an error, while $x_{n_{i}}$ works, but it just looks like $x_{ni}$ (the i isn't lowered enough below the n)...
11
votes
4answers
928 views

Multiple tensor indices with breqn package

When I try to use the tensor style file to create multiple tensor indices with the breqn style file, I run into the following problem shown in this (minimal) code: \documentclass{article} ...
11
votes
2answers
6k views

Is there an “underscript” command?

Is there a way to do underscripts? By "underscript" I mean a small font underneath the text object like limits or sums have. I don't want it to behave like a math operator though, where it is typeset ...
4
votes
1answer
833 views

Defining a newcommand with sub- or superscript and avoiding “double subscript” error

I often use shortcuts defined via \newcommand. However sometimes it causes a "double subscript" problem if a shortcut contains a subscript and I try to add one more subscript when using it. I am ...
4
votes
2answers
637 views

Italic/slanted math font and kerning

I'd like to write a macro for typesetting slanted letters in bold for highlighting vectors. I've used this implemenation: \newcommand\vect[1]{\text{\bfseries\sffamily\slshape#1\/}} But I've run ...
2
votes
1answer
223 views

relative hspace in newcommand

I'm trying to create a symbol of a gray triangle with a black border. I managed to do so using: \newcommand{\factor}{{\color{gray} \blacktriangledown}\hspace{-1.6ex}\triangledown} However, the two ...
8
votes
5answers
6k views

How to properly subscript in a superscripted fraction?

the title says it all. It attached a MWE to display the different relative sizes of a subscript within a normal fraction and a superscripted fraction. As you can see, in the superscripted fraction the ...
16
votes
4answers
7k views

How to typeset indices before a symbol?

I know how to write a usual index with the help of the underscore, but I seem to be unable to find out how to write an (upper/lower) index in front of a letter/text. These kind of indices are common ...
7
votes
1answer
2k views

Writing (mixed) tensors

Does anybody know about a specific package for handling tensors? Consider, for example, a contraction of the type ...
8
votes
2answers
379 views

How do I get references in subscripts to be the right size when compiling to dvi with hyperref?

(Having investigated the original question, I'm taking the liberty of re-writing it as I've found a MWE and so isolated the problem, but I don't know a solution. Andrew Stacey.) The scenario is as ...
7
votes
1answer
470 views

Weird font/spacing issue with LuaTeX & Asana Math

Trying to use LuaTeX font support in some big document, everything went fine except a little glitch with Asana Math font. Here is the issue: \documentclass{standalone} \usepackage{unicode-math} ...
5
votes
1answer
265 views

Redefine underscore on a per command basis.

Is it possible to redefine the underscore while within a particular command only? This is somewhat related to: Redefine underscore to produce roman subscript I would like: \mycmd --> S ...
5
votes
2answers
595 views

sub- and superscripting together in text mode

I want to use sub- and superscript together in text mode. I've found this macro to solve the problem \def\textsubsuperscript#1#2{\rlap{\textsubscript{#1}}\textsuperscript{#2}} But it doesn't works ...
6
votes
1answer
179 views

Uneven subscripts. [duplicate]

Possible Duplicate: Supremum of the infimum Is there a way to make the subscripts appear evenly in the following code: \sup_{a\in A}\inf_{b\in B}? That is, so that a\in A doesn't appear ...
1
vote
4answers
1k views

How to prevent adding subscript from italicizing the text thereafter?

When I try to add subscript(I write O_L and O_R to denote left and right ) in my text all the text after that becomes italicized. Any ideas what might be causing this?
2
votes
1answer
2k views

The use of subindices with greek letters

I need to use subindices with greek letters. But I find that the result is sometimes decipherable. Examples: $\alpha_{H}$, $\gamma_{H}$ Do you have any suggestion in that regard? Of course, I do ...
3
votes
1answer
497 views

Left Aligning Subscripts

When using displayed (in contrast to inline) equations LaTeX center-aligns subscripts: \Pr\limits_{{r \leftarrow_R \{0,1\}^n}} [ ... ] However, I like them to be left aligned. This can be done by ...
5
votes
2answers
147 views

Colored sub and super-scripts are misaligned

The title basically describes the problem. Here is a minimal example: \documentclass{article} \usepackage{xcolor} \begin{document} $$X_{\color{red}{135}}^{\color{cyan}{345}}$$ \end{document} ...
1
vote
1answer
891 views

Alternatives to \sideset and \nolimits?

I'm trying to typeset as $one \sideset{}{_{three}}\prod two$ in instiki (well, ok, it's the nLab [waves to Andrew Stacey]), but it doesn't work. Is there any other alternative to \sideset that I ...
4
votes
3answers
511 views

Redefine underscore to produce roman subscript without breaking file names

I've been using Hendrik Vogt's answer to my earlier question Redefine underscore to produce roman subscript, in which he explained how to make the underscore character active and assign a macro to it ...
9
votes
1answer
2k views

Text in subscript

For my text-in-mathmode needs in LaTeX, I use \mbox. However, it does not seem to behave well in subscripts. How can I write text that adjusts its height? $ 3 \mbox{dB} = f_{ 3 \mbox{dB} } $ ...
58
votes
5answers
16k views

Left and right subscript

I am trying to put two subscripts at the left and right of a character. For example, something like: _{t} p_{x} where p is in the middle. How do you do this?
7
votes
4answers
2k views

Problem adding subscripts and superscripts [duplicate]

Possible Duplicate: Cursive text after _ I need to have some subscripted and superscripted text in my thesis document. But when I try to do it the way as H_{2O} or S^{2}. I get an error at ...
7
votes
4answers
547 views

is it possible to change the depth of subscripts?

I have the following formula: $ F_{\!\bm{H}} F_{\overline{\!\!\bm{H}\!}} $ In this case both subscripts end at different depths (but start at the same height). I'd like them to end at the same ...
0
votes
1answer
205 views

Which one should be chosen for making a transposition of matrices: `fourIdx`, `leftidx`, `tensor`, `subsupscripts`, `mathtools`?

I want to get a transposition symbol of matrices like ^t(1 2 3), as title. I used the macro \prescript (in mathtools) at present. There is no any problem occured, these packages' macros work well. I ...
2
votes
1answer
3k views

Textual subscript in math mode

I want to put some short words in certain subscripts when I am in math mode, for example: \[W_{total} = \sum{W_i}\] but I think LaTeX understands this as the product of t, o, t, a and l. Is in ...
8
votes
2answers
1k views

Redefine underscore to produce roman subscript

I would like to redefine the underscore _ to automatically set subscripts in math mode in roman type, as I currently find myself almost always using _\mathrm{}. I can't find a way of redefining what _ ...
12
votes
3answers
24k views

Superscript and Subscript together

I would like to show both super and subscript together some text. I tried this sometext\textsuperscript{1}\textsubscript{2} But 2 does not show up right below 1. Thanks for your help. Also ...
13
votes
3answers
11k views

Supremum of the infimum

Consider the following snippet: $$\text{d}_{H}(A,B) = \max\left\{ \sup_{a\in A} \inf_{b\in B} \text{d}(a,b),\sup_{b\in B} \inf_{a\in A}\text{d}(a,b)\right\}$$ In the output, the text under the ...
1
vote
2answers
285 views

How to make contextual framed letters get proportional size automatically?

I am creating a question sheet using a method (I don't know the exact name, maybe bubble sheet format) as follows: My question is how to improve the appearance such that the framed letters get ...
10
votes
1answer
4k views

How to make proportional subscript when using smaller font in math mode?

How to make proportional subscript when using \tiny (or smaller than normal font size) in math mode? The following screenshot shows subscripts for \tiny, \scriptsize and normal font sizes. ...
4
votes
2answers
904 views

Underbrace and Subscripts

How do I place a underbrace in a subscript? I_{2,(\underbrace{3,3,3,3,3}_5)} does not typeset correctly (the 3's are not subscript sized)
12
votes
3answers
3k views

How to raise a subscript?

For some reason, I need to write a “minus” sign as a subscript on some symbols, but if I simply write $\Pi_{-}$ the result looks kind of odd. I've found that $\Pi{\scriptstyle -}$ looks reasonably ...
4
votes
2answers
731 views

Problem with \mathpalette and \mathchoice

When working on an additional answer to this question of mine, I stumbled across the following problem with \mathpalette. For simplicity I give an example where in practice it is ridiculous to use ...
17
votes
4answers
3k views

Subscripts for primed variables

When I add a subscript to a primed variable, the subscript is rendered lower than when it is a subscript to an unprimed variable. For example, when I compile $l_x l'_x l_x l'_x l_x l'_x$ I get ...