1
vote
1answer
49 views

Subscript with fraction, large vertical spacing

In a paragraph, the expression $A_{b/c}^{dd}$ causes an undesired larger vertical spacing of the sentence where it appears (compared to the rest of the paragraph). I have tested some solutions (eg. ...
0
votes
0answers
36 views

Sub and super script in a diffent font [duplicate]

In a equation, I need sub and super script in a differnt font, other equation part as a differnt font, I am Using MiKTeX 2.9 version. How to get these style in the output? supscipt position is ...
5
votes
1answer
70 views

Why is my prime symbol too low? And: Why are my subscripts not scaled accordingly when I use \scriptsize?

I have two (maybe simple) questions concerning the following LaTeX document \documentclass{scrartcl} \usepackage[ansinew]{inputenc} \usepackage[T1]{fontenc} ...
2
votes
1answer
33 views

Superscript and subscript, to immediate right of symbol without distortion

I want to have an output like this The closest I have come is with code ${A^{\leftarrow}}_(x, y, z + n)$ that gives me something like where the subscript is way of the mark. Trying something ...
11
votes
3answers
227 views

Avoiding overlapping superscripts and subscripts in matrices

I was working on some calculus today and tried to typeset a matrix of partial derivatives and ran into some trouble. Here is my code: \documentclass{minimal} \usepackage{mathtools} \begin{document} ...
8
votes
0answers
166 views

Einstein summation convention [closed]

In Einstein's summation convention, it is sometimes necessary to have subscript and superscript indices in a certain order. If you just use ^ and _, these indices would appear on top of one another, ...
19
votes
6answers
655 views

How to let three subscripts and three superscripts to be aligned

Suppose I need to get a formula like $L^{2,3/4,5/6}_{1,2,3}$ in Latex. Then $2$--$1$, $3/4$--$2$, $5/6$--$3$ is not aligned. See Then how can I let these three to be aligned?
0
votes
0answers
96 views

completion of math superscript/subscript in texshop

I updated to TeXShop 3.25 and have a minor problem with completion. In the previous version, typing ^ or _ in math mode, I got automatically the brackets, that is, a^ automatically gave a^{}. Now I ...
2
votes
1answer
92 views

How to separate subscript and superscript in LaTeX?

I have a variable with a subscript describer P_{\rm 1S} I'd like to square it. First a style question: is (P_{\rm 1S})^2 or P_{\rm 1S}^2 better? The programming part of the problem is that the ...
6
votes
5answers
108 views

How to put a symbol over another in the same line - simultaneous superscript/subscrtipt

Is there a way to put one symbol over the other just as in this shot of a dictionary page? http://phonetic-blog.blogspot.com/2009/09/weak.html
11
votes
1answer
99 views

Size of indices (sub- and super- scripts)

I've been looking around for a way to change the size of indices (all through the manuscript). I found a lot of stuff, which could work, but I refuse to use without understandind. (See for example ...
9
votes
1answer
214 views

Consistent vertical positioning of superscripts

This is somehow a follow-up question to this one. I've got the following math expression: \nabla_y u_0^{(i)}\nabla_y v^{(i)} However, no matte, whether I enclose the v in curly brackets or not (as ...
1
vote
2answers
173 views

Spacing depending on optional subscripts and superscripts

I am totally new to LaTeX (use it for 2 days), so I am sorry if this has already been asked, but I spent the last 6 hours searching for a solution, but to no avail. (I stumbled upon a package xpeek ...
5
votes
1answer
94 views

Sub and superscript on the left

I want to do something like this: \documentclass{article} \usepackage{amsmath} \begin{document} \begin{align*} Hom_{K\cap {}_a^bK} \end{align*} \end{document} But there seems that the _a^b is ...
6
votes
4answers
125 views

How can I capture both superscripts and subscripts after a macro

This question piggy-backs on the answer to Capture a macro's subscripts/superscripts by the macro by egreg. I'm attempting to use the xparse package to create some macros and I'd rather not have ...
7
votes
3answers
205 views

Force inline-type superscript for display equations (but display-type subscript)

I am trying to create a macro \jjoin for a mathematical operator which roughly produces the following behaviour: Inline: \bigvee^{(J)}, subscript (typically i \in I) goes in the usual position (as in ...
4
votes
1answer
98 views

Triple scripts for analysis

I am doing the music harmonic analysis. There are plenty of symbols that must be added and there are need for: underscript triple sub/super scripts:
7
votes
2answers
190 views

Automatically Raising Subscripts

I have the following expression J_{ne}\boldsymbol{\mathsf{J}}_{ne}^{-1} which is awkward in the sense that as the second (sans-serif) J has a superscript that the subscripted indices are lower than ...
6
votes
1answer
123 views

Defining a different symbol to be used as a sum-class symbol

If I'm interested in using an arbitrary symbol or character instead of the default sum-class symbols (such as \int, \coprod, etc), solely with the interest of preserving subscripts and superscripts ...
4
votes
1answer
193 views

How to put a subscript in a superscript

How can I write the following thing? a^(b_c), b being a superscript of a, and c being a subscript of b.
3
votes
1answer
78 views

Recursive Multiple subscripts and superscripts with xparse (Modified Version)

How can I modify the command below to obtain a version (of the question: recursive multiple subscript and superscript with xparse) which does not stack the sub/superscripts horizontally but moves all ...
9
votes
2answers
154 views

recursive multiple subscript and superscript with xparse

How can I define a new command with xparse, something like this: \NewDocumentCommand\tensorkor{ m >{\SplitList{,}}o >{\SplitList{,}}o } { ????? } that i can execute $ ...
12
votes
2answers
406 views

Differences in vertical positioning of superscripts and subscripts depending on grouping (`{ }`): Why? Caveats? Workarounds?

This question about {(x+y)}^2 vs (x+y)^2 drew my attention to the slightly different vertical positioning of super- and subscripts for such expressions. Compare (x+y)^8_8 (left) and {(x+y)}^8_8 ...
13
votes
1answer
327 views

How do you get a scriptscriptstyle-sized prime?

As you go from \displaystyle to \scriptstyle to \scriptscriptstyle, letters and numbers, for instance, shrink. Weirdly, to my mind, the prime symbol (') shrinks from \displaystyle to \scriptstyle, ...
6
votes
2answers
296 views

The \prescript command from the mathtools package gives incorrect alignment

The spacing I'm getting with the \prescript command from the mathtools package seems wrong. Here is a MWE: \documentclass{article} \usepackage{amsmath,mathtools} \begin{document} ...
5
votes
2answers
151 views

\left( and \right) too big when surrounding a sum (etc.) with no superscript; exacerbated by substack

When I write \varphi^{-1}\left(\bigcap_{\substack{\mathfrak{p} < B \\ p \text{ prime}}} \mathfrak{p}\right) I get something like this: Apparently it's leaving symmetric amounts of room for ...
4
votes
1answer
230 views

Can't turn off fontified subscripts in Emacs 24

Under Emacs 24.3 and Auctex, the sub/superscript fontification is occurring outside math modes. This appears in either Beamer or normal LaTeX docs. Per this question, I've included the following ...
2
votes
1answer
422 views

Subscript and superscript in lstlisting?

I need to use subscript and superscript in a lstlisting block. lstlisting can replace strings by Latex commands, but is it also possible to replace some kind of regular expression like ...
3
votes
1answer
857 views

How to control line spacing and subscript location in captions?

I just started using mhchem and am having problems with captions. Subscripts from mchem overlap with superscripts. I can think of two possible solutions (and trivially not using mchem in captions): ...
3
votes
1answer
753 views

Combining Textstyle and Displaystyle

In my mathematics writing, I often use both superscripts and subscripts on the probability operator. The subscripts are generally lengthy, and I would like for them to appear underneath the operator, ...
4
votes
3answers
462 views

Subscripts and superscripts for Physiology paper

I'm writing a medicine/physiology article. I was writing the manuscript in Microsoft Word, but have recently discovered LaTeX for rendering math equations, which it does superbly; and wanted to learn ...
3
votes
2answers
226 views

Leftidx problem: upper indices have different height

When using the leftidx package to create the same upper index on both sides of \Bbbk[G], the indices have different height and look ugly. Minimal example: \documentclass{article} \usepackage{leftidx} ...
22
votes
3answers
1k views

maths nested superscripts and subscripts displayed incorrectly inline

I am having a strange bug when using nested superscripts and subscripts in inline math (displaystyle works fine). This behaviour is the same independently of the font used or the compiler (orginally ...
14
votes
3answers
417 views

By default, how much do ^ and _ raise and lower the text box in superscript and subscript respectively?

I'm trying to define a set of commands for superscript and subscript, but cannot use the characters ^ and _ in doing so. I've been able to define the correct font size by using ...
7
votes
1answer
107 views

Can I detect whether my macro is being used inside a subscript or superscript?

I defined this macro: \newcommand{\foldeq}[1]{\sim_{#1}} Later on, I noticed that when it's used inside a subscript, it looks a little bit hard to tell whether it's $\sim f$ or $\sim_f$. ($\sim f$ ...
10
votes
2answers
583 views

Weird relative positioning of superscript and subscript with \dot, \bar

Minimal working example: \documentclass[12pt]{article} \usepackage{amsmath} \begin{document} \[ {A^\mu}_\nu \] \[ {\bar{A}^\mu}_\nu \] \end{document} The result is. Why is the placement of ...
4
votes
3answers
416 views

Mixed superscript, subscript and widehat

What is the correct way to write this equation and make both L_s matrices look the same? I tried this but the widehat and superscript L_s matrix' subscript is positioned slightly lower than the ...
10
votes
1answer
153 views

Capture a macro's subscripts/superscripts by the macro

Is it possible to capture sub-/superscripts added to a macro by the macro itself? Consider the following example: \newcommand{\fx}[1]{f(x)} \fx{x} % -> f(x) \fx{x}^2 % -> f(x)² Now the ...
1
vote
1answer
478 views

Combining \operatorname with \mathnormal and \mathrm

Related Question: Typesetting the square of a mathematical operator \operatorname converts its argument into a function symbol with appropriate spaces on the left and on the right. However, I ...
2
votes
2answers
937 views

Sub-/Superscripts in Headings/Normal Text [duplicate]

Possible Duplicate: How to typeset subscript in usual text mode? I sometimes want to typeset something simple like $N_2$ or $3^2$ in a Heading, other times in a paragraph of normal text. I ...
2
votes
1answer
1k views

Index Exponent with LaTeX

Please, how can i write C i,j in LaTeX (i as an index and j an an exponent)? I know just that: C^j C_i
4
votes
1answer
528 views

Better looking nested subscripts and superscripts

I have a situation where I need to subscript a superscript in math mode (and actually, subscript that subscript in some cases). (Please don't waste time telling me to change my notation; this is the ...
4
votes
1answer
228 views

Strange interaction between amsmath and setspace

Compiling the MWE below, you will observe in the output the following phenomenon (you may have to zoom in): Comment amsmath out. Then, the spacing beteen lines is such that the subindex of the ...
5
votes
1answer
622 views

Squeeze superscripts and subscripts around bracketed expressions in display math

Consider a bracketed term in display math, like this. Is there any way to squeeze the space between the super/sub-scripts and the bracketed term? e.g. where I've modified the image to create the ...
7
votes
2answers
1k views

Subscript vertical position dependent on presence of superscript - how to change? [duplicate]

Possible Duplicate: Subscripts for primed variables If I have a variable which is always subscripted but only sometimes superscripted, the vertical position of the subscript varies. For ...
5
votes
0answers
360 views

How to lower the superscripts (and raise the subscripts) [duplicate]

Possible Duplicate: tex4ht problems with footnotes I am preparing a document using XeLaTeX, unicode-math and Asana Math OTF (turned on by \setmathfont{Asana-Math.otf}). I've noticed that ...
6
votes
1answer
379 views

Redefine the default depth of superscript and subscript document-wide

The behavior of subscript and supscript operator _ and ^ is like a blackbox to me, I am curious if I could redefine the behavior of them globally for a document. I searched the forum and found ...
1
vote
1answer
175 views

A macro which is similiar to \prescript but it can be used in text mode

How to define a macro, say \pretextsuperscript, to get a presuperscript ahead a word in text mode? Just simply write \textsuperscript{2}hormone and \textsuperscript{2}population is incorrect. Why say ...
11
votes
4answers
856 views

Multiple tensor indices with breqn package

When I try to use the tensor style file to create multiple tensor indices with the breqn style file, I run into the following problem shown in this (minimal) code: \documentclass{article} ...
3
votes
1answer
758 views

Defining a newcommand with sub- or superscript and avoiding “double subscript” error

I often use shortcuts defined via \newcommand. However sometimes it causes a "double subscript" problem if a shortcut contains a subscript and I try to add one more subscript when using it. I am ...