2
votes
0answers
22 views

Help in hooking into the \begin{frame} environment in beamer article mode, so as to produce a list of frames per subsection

I am in the course of composing a long beamer document, which should serve both as slides for class presentation and as a mini-textbook. My document includes about 600 slides, which are partitioned to ...
1
vote
1answer
57 views

Latex Beamer - Toc too long

I'm preparing for a master thesis defense... but my presentation is getting a bit lengthy... ...anyways when the ToC gets too long on the side it stretches over. See attached image. Any good advise ...
0
votes
0answers
29 views

How can I suppress table of contents that is appearing before every slide in beamer?

How can I suppress table of contents that is appearing before every slide in beamer? I don't want to get the contents slide, but still I want the second slide highlighting current section in between ...
0
votes
0answers
28 views

Include the list of parts and their sections in a global tableofcontents of beamer

I'm using beamer to produce a long presentation with several parts. Is there any way to generate a global TOC which should contains all the parts and their sections ? MWE: \documentclass{beamer} ...
3
votes
1answer
104 views

Beamer (with Bergen theme) how to move ToC from sidebar to “main part” of slide?

How would I move the table of contents produced by \tableofcontents from the left sidebar to the main part of the slide? It produces a lot of unused white space, as in the following: This code ...
2
votes
1answer
45 views

Changing the section and subsection font color in contents page in beamer

I want to change the section and subsection names in my contents page on beamer. Plz help me. Thanx in advance
3
votes
1answer
41 views

Beamer frame with two columns and sequential uncover of toc sections

I know that there is already this question, but I couldn't apply the answer on my problem: I want to uncover the sections that first section, than second section, ... , than 10th section will uncover ...
5
votes
1answer
93 views

How to get the sum of all sections and subsections in beamer

I want to determine how many pages I need for my toc which will be displayed in two coloumns with 10 (sub)sections each page. So if I had 8 sections and 20 subsections the code should return 28. ...
3
votes
1answer
35 views

Enumerate Table of Contents in Beamer

I have the following slide. a) I want it to have subsections numbered 10.1 and 10.2 etc. I had increased the secnumdepth(3) doesnt help. b) sub sections are indented weirdly(horizontally side by ...
2
votes
0answers
61 views

Add \paragraph type entries to beamer table of contents

I want a beamer TOC slide like this: SECTION 1 ..Subsection 1 ......Slide Title 1 ..Subsection 2 ......Slide Title 2 ......Slide Title 2 NEXT SECTION ......Another Slide Title In documents I use ...
2
votes
1answer
70 views

Alignment of toc in beamer class

I have some problems with vertical alignment of toc in beamer class related to this question. The answer works for me, but i would like to center the toc and decrease the horizontal space between ...
3
votes
2answers
57 views

Pause between frame title and TOC

I'm using beamer for a presentation. What I would like is a pause after the frame title and before the TOC. \pause as in \begin{frame} \frametitle{my frame title} \pause \tableofcontents[] ...
2
votes
1answer
195 views

Highlight current section in beamer

I'd like to highlight the current section in my table of contents on all slides which are part of the section. At the moment the section is only highlighted on the slides without subsections. ...
1
vote
0answers
71 views

Beamer: how to make each frame appear in the PDF ToC and add a bibliography

I want to build on the solution of this answer, to create a ToC for the PDF, by adding a bibliography in the last slide. It seems nevertheless that the bibliography interferes with the table of ...
2
votes
1answer
44 views

Contents Table in beamer squeezing distances

I would like to squeeze the table of Contents in beamer from the top. Also, I would like to increase the horizontal distance for subtitles as the following picture This is my code. Please suggest ...
3
votes
1answer
114 views

How to remove the default set logo from the title page and the ToC's page

How to remove a logo from the title page and from the ToC's page, please? Using this code : \documentclass[xcolor={dvipsnames}]{beamer} \usetheme{CambridgeUS} \author{The Author} \title{Work ...
2
votes
0answers
53 views

Show TOC in Beamer under special conditions

I'm wondering how to display the TOC: At beginning of section if there is no subsection At beginning of subsection else Each option can be achieved separately quite easily with the commands ...
2
votes
1answer
183 views

Highlight current section using alert in beamer

The following \AtBeginSection[] { \begin{frame}<beamer> \frametitle{Outline} \tableofcontents[currentsection] \end{frame} } inserts the table of contents at the beginning of each section, ...
3
votes
1answer
90 views

Making \includeonlylecture{} only ignore frames but not global structure elements such as sections

I am presently preparing lecture notes in beamer. I have the lecture course structured into parts, sections etc and I would like use the numbering scheme consistently throughout the course. Without ...
3
votes
3answers
301 views

Separation space between tableofcontents items in beamer

In beamer, I guess, the separation space between the items from tableofcontents is stretchable: Can you set it to a fixed value? e.g. to equal the value used in the itemize environment. Partial ...
3
votes
1answer
75 views

change the numbering in Beamer's table of content

Beamer's table of contents starts with bullet 1. How can I change that to bullet 0? The command \setcounter{section}{-1} in the preamble does not help.
2
votes
1answer
144 views

change numbering in table of content for Beamer

I want to use roman number for section and bullet for subsection in TOC for Beamer as shown in this figure:
2
votes
1answer
73 views

How to change bullets to basic numbers in each tier of Beamer table of contents?

I would like to have Beamer table of contents like this: item 1.1. item 1.2. item item 2.1. item 2.2. item It is partially similar like this: Remove the bullets in Beamer's table of ...
5
votes
3answers
103 views

\tableofcontents[ISSUES]

Hello TeX/LaTeX/Beamer colleagues, There is a prob I could not solve. I'm preparing a 2 hours class, so my toc is really heavy. 5 Sections, some of them with several subsections. I already have the ...
2
votes
0answers
49 views

Two-column beamer ToC with control over the breaking point and without balancing

I'm using the solution provided by lockstep in https://tex.stackexchange.com/questions/26929/two-column-beamer-toc-with-control-over-the-breaking-point to spread the TOC over two columns. However, ...
0
votes
0answers
32 views

Dividing the TOC or rolling it back [duplicate]

I am using beamer with the warsaw theme. I like the fact that I can display the table of contents on the top of each slide while it highlights the section/subsection that I'm on. However, In the case ...
4
votes
1answer
569 views

Add a section to beamer table of contents but not to navigation bar

This question has been asked before, but for a different beamer theme. The answer there did not make it clear to me how to deal with my case, illustrated in this example (which I think is close to ...
5
votes
1answer
112 views

In beamer, how can you use \tableofcontents[hidesubsections] and still render correctly the TOC?

Using: pdfTeX 3.1415926-2.5-1.40.14 (TeX Live 2013) When using the \tableofcontents in beamer, using the theme Berkeley, with the option [hidesubsections], [hideothersubsections] and the options to ...
1
vote
1answer
560 views

Beamer: \AtBeginSection doesn't agree with ignorenonframetext

I'm following the advice in the Beamer user guide to produce slides and printed material from the same source using the beamerarticle package. The user guide recommends using the class option ...
0
votes
0answers
75 views

Changing the section navigation from vertical to horizontal

I like to use the Malmoe theme in the beamer class. However, I would rather have the header navigation for the sections horizontal instead of vertical, so that it takes less space.
4
votes
1answer
487 views

Left margin of table of contents in beamer

I'm making a presentation with the beamer class, and I use the theme Madrid (with default settings). After having completed some frames I noticed that the left margin of the contents page is much ...
3
votes
1answer
258 views

Subsections of one section do not appear in TOC (LaTeX beamer mode)

I'm trying to prepare a presentation using LaTeX's beamer mode. For some reason the subsections of my last section do not show up in the TOC. Here is my MWE (incl. all the packages I'm using): ...
2
votes
0answers
114 views

How to display partial TOC (only one section at a time)?

I already know how to print an Outline with only the current section. What I'd like to do is to have an Outline slide with some extra info (for instance, a publication) below each section of TOC. I ...
3
votes
1answer
205 views

Add phantom section to Beamer TOC

In preparing my a presentation for my thesis defense, there is obviously way more material in my thesis than what I can cover in my presentation. Using the toc command, ...
6
votes
1answer
237 views

Numbering subsubsections in beamer

I tried using \setbeamertemplate{subsubsection in toc}[subsubsections numbered] but this does not seem to work. Here is a full example: \documentclass{beamer} \setbeamertemplate{section in ...
4
votes
2answers
340 views

Displaying an new image for each new section with running table of contents

I would like to have the table of contents slide displayed at every \section{} however, along with the particular section highlighted (as usual in beamer using \AtBeginSection[]{...}), I would like to ...
5
votes
2answers
427 views

Assembling multiple beamer slide decks into “book” with “chapters” and TOC

I have a number of related beamer slide decks that I'd like to print as a bound handout "book". My file layout is as follows: A general include file (include.tex) used by most other files: ...
6
votes
1answer
107 views

Same color and size of tableofcontents? (Beamer, Warsaw)

I want to write something with the exact same color and size that the title sections are written in the Warsaw theme of Beamer, but in a random place of the presentation as any other word. Is that ...
0
votes
0answers
30 views

How to split slide in Beamer table of contents page? [duplicate]

I created a standard table of contents page in Beamer \AtBeginSubsection[] { \begin{frame}{Outline} \tableofcontents[currentsection,currentsubsection] \end{frame} } I have a lot of ...
1
vote
0answers
156 views

Headline Table of Contents in columns in Beamer

I was wondering if anyone knows how to tell Beamer to divide the table of contents in the headline in columns if there are too many sections, else leave it in one column. I found this thread very ...
5
votes
0answers
327 views

Custom TOC in beamer - customizing the TOC layout [duplicate]

At the moment I'm developing a corporate identity for the beamer class of my institute. In fact a power point solution is available and I'm trying to rebuild a tex-friendly version. However, at the ...
0
votes
0answers
169 views

Customize table of contents [duplicate]

I have a table of contents page which has several sections and subsections. Now, before i start a topic i want to display the all the sections+ sub section of the topic i am going to start. How can i ...
2
votes
1answer
2k views

Show/Hide subsections in the table of contents of a beamer presentation

I am new in LaTeX and I need some help in doing a beamer presentation. I have a dense table of contents with 6 sections and 15 subsections in total. I would like to have a table of contents which ...
2
votes
1answer
950 views

subsection font size in table of content, beamer

Is there any possibility to change the font size of the subsections, shown in the table of content? Using the beamer class?
2
votes
1answer
2k views

Only section heads in table of contents

I'm new to making LaTeX presentation. I'm using beamer type as documentclass. After the title slide, I have the table of contents slide. Now in the table of contents slide I don't want to show the ...
7
votes
3answers
729 views

Why does Beamer's table of contents items link to the second slide in a section?

When I include a table of contents in a Beamer slide show, each section entry in the TOC ends up linking to the second slide in that section. I would have expected it to link to the first slide. What ...
5
votes
2answers
860 views

Beamer table of contents custom bullets: Long section titles do not align

I have redefined the table of contents bullets in my slides to a circled number. However, long section titles which span more than one line do not align with the text from the previous line but with ...
4
votes
1answer
4k views

Beamer with Bibtex: References Bullet Formatted Incorrectly in Table of Contents

I'm using beamer to make a presentation. I am also adding references with \bibliographystyle{apacite}. When I create a table of contents with \tableofcontents, the "References" shows up as the last ...
2
votes
1answer
118 views

Combining Beamer-List-of-frames with TOC (sections etc.)?

Related to this question »Is there any way to produce List of frames with beamer?« Is there a way of combining TOC (section / subsection) with this listofframes? (e.g. frametitles just like ...
7
votes
1answer
190 views

How to produce a list of frames with Beamer if frame titles have LaTeX tags in them?

Related to: Is there any way to produce List of frames with beamer? The above method works if frame titles don't have tags such as \emph{} in them. However, if a frame title has such a tag, the error ...