4
votes
1answer
36 views

Small caps in section but not in ToC

With LaTeX, I would like to set all my section titles in small capitals but I need the \textsc to be 'cancelled' in my table of content. Is that possible somehow ? I currently do this : ...
4
votes
2answers
109 views

Format table of contents with LaTex

Is it possible with LaTeX commands, or a LaTeX package, to format the Table Of Contents (TOC) of a book so that the TOC looks like this : Table des matières Chapter I - MyChapter1 I.1 MySection1 ...
1
vote
0answers
40 views

Prefix Appendices in the Table of Content

I am using a predefined Latex-document for my master thesis. I wanted to add some appendicies, so I added some chapters after the bibliography. These chapters appear nicely formated, and are ...
4
votes
3answers
116 views

formatting of the table of contents

How can I change the settings of my table of contents, so that the sections and subsections are not indented as shown in the second picture. I would also like to center the title of the Contents. I am ...
1
vote
0answers
43 views

How to suppress the hanging-over text part of a section title within the table of contents?

My question is, if there exists a method to suppress hanging-over text elements in the table of contents. Below you will find my MWE. Thanks a lot for your solutions and comments! ...
0
votes
0answers
39 views

Changing the section navigation from vertical to horizontal

I like to use the Malmoe theme in the beamer class. However, I would rather have the header navigation for the sections horizontal instead of vertical, so that it takes less space.
5
votes
1answer
147 views

Minimum space between last word and page number in the table of content

y question is, whether there is a solution to define a minimum blank space (length: three dots) between an entry's last word and the its page number within the table of contents? Thanks a lot! ...
5
votes
1answer
97 views

Add table titles from captions in scrreprt class

I am badly looking for a way to give all my tables the same title in the document, that is used in the list of tables via caption[title]{long description...}. The reason is that my tables originate ...
7
votes
1answer
91 views

Change format of the contents page

I want to label some of my sections listed in my contents page as 'Introductory'. I thought I could achieve this by having a dotted box around these chapters in the contents page that marks them as ...
4
votes
2answers
291 views

Displaying an new image for each new section with running table of contents

I would like to have the table of contents slide displayed at every \section{} however, along with the particular section highlighted (as usual in beamer using \AtBeginSection[]{...}), I would like to ...
1
vote
1answer
190 views

Table of Contents Modification: How to change fonts from bold to normal?

I am writing my dissertation and for that, I am using a style file that originally was created by Georgia Tech, but later on, it was modified by different students at my school. The problem I ...
3
votes
2answers
179 views

titlesec troubles

I am working on a document that will consist of many sections and subsections. I want to have a table of contents per section. I am using titlesec, titletoc and titleps. I have the following MWE: ...
4
votes
2answers
103 views

lstlistoflistings formatting problem

I'm using \lstlistoflistings to create list of listings. Everything generates well except for the formatting issue I have. I tried to fix it but don't have enough knowledge. This is how the ...
1
vote
1answer
241 views

Thesis running problem in KILE

I'm using KILE editor. There is no problem when I run others .tex article in Kile. But problem is when I run a thesis article in KILE. This thesis article is running fine in WinEdt. ...
4
votes
1answer
122 views

Section title coloring code makes Table of content numbered

I was looking for a way to have a colorbox as background of section titles. The following answer that I got on this thread was succesful in doing just that. But it has a side effect that is rather ...
3
votes
1answer
557 views

Beamer TOC: changing color and shape for subsection items in TOC

The default items for subsection in TOC are balls (no-nummered). I would like to use blue triangles, like the symbol \blacktriangleright but blue color. Any idea?
3
votes
2answers
753 views

How to remove the self-reference of the ToC in Latex book class

I want to remove the self-reference of the ToC in Latex book class as in the picture below Can you help me?
4
votes
1answer
242 views

How do I get the table of contents, list of figures and list of tables to have the header I specify

I used \renewcommand\contentsname{\Large{TABLE OF CONTENTS}} (similar for list of figures and list of tables) to obtain headers that were centered at the top of the page, not bold and capitalized. ...
0
votes
0answers
12 views

How to get rid of italic in the table of contents? [duplicate]

I formatted the titles of section and subsections in italic, and it appears italic in the Table of Contents, I want no influence on the Table of Contents. For example \subsection{\textit{The RGE for ...
7
votes
4answers
134 views

Know the width of the widest section label in memoir

I'm using memoir class to write my master's thesis, and my university asks to align all section labels to the left. I say section, but I really mean all levels, as chapters, sections, subsecs and so ...
3
votes
1answer
131 views

How to include Appendices' name in LOF?

I would like to know how to show Appendices' name in LOF if they contain figures. % % % % % % % % % % PACKAGES % % % % % % % % % % % % % \documentclass[11pt,a4paper]{report} ...
3
votes
1answer
519 views

Appendices' sections at subsection level in TOC

I would like to know how to show appendices' sections (B.1, B.2) at subsection level in TOC. MWE: % % % % % % % % % % % % Packages % % % % % % % % % % % % % % % ...
2
votes
1answer
184 views

Appendices at section level in TOC

I would like my appendices to appear in TOC at section level instead of at chapter level. Like this: Appendices A My appendix 1 . . . . . . . B My appendix 2 . . . . . . . ...
2
votes
1answer
406 views

fancy chapter title page for entire document

How to enable this style as well for TOC and bibliographypage ? Note that, I'm using scrreprt document class
1
vote
2answers
258 views

Glossaries in List of Figures overflow

Given a figure with a caption, in this caption a glossary term in used as in \gls{wysiwyg} At the document beginning, after the contents, the \listoffigures command is given. As the caption ...
1
vote
1answer
378 views

Change the chapter font in TOC without using “tocloft” package

As using tocloft in book class produces some unexpected side-effect, I wonder how to change the chapter font (e.g. 1 Introduction) as sans serif without using any other packages? For example, change ...
3
votes
1answer
179 views

Poorly formatted newlistof with memoir

I am having trouble adding a newlistof to a memoir file. My example follows the memoir answer example very closely, but I get an ugly "List of Comments" -- spacing across the page and returns are ...
3
votes
1answer
142 views

How can I temporarily change title of contents of subsection formatting using titletoc

I have a common document type (grant application) which expects listed aims, usually enumerated as Aim 1, Aim 2, etc. In the MWE below, an article class works fine to format the subsection headings ...
4
votes
1answer
278 views

ClassicThesis TOC headlines

Why the headlines in the TOC are in \normalfont and not in \spacedlowsmallcaps as the rest of the document? How can I make it \spacedlowsmallcaps? \documentclass[% headinclude,% ...
0
votes
1answer
199 views

How to remove bold in ToC, ideally without a package

I am writing my thesis, using a document class unique to my university - based on the article class. I have to remove ALL bold formatting in the Table of Contents, and for some reason I get an error ...
3
votes
1answer
484 views

Remove underline from Table of Contents

I'm trying to create a Table of Contents but I am having some trouble getting it to look how I want. At the moment I have the section headings underlined in the document and because of this when the ...
2
votes
1answer
708 views

babel and \contentsname, how to add extra customization?

This is what I'm trying to do: \renewcommand{\contentsname}{ \vspace{-8mm} {\Huge Table of Contents}\vspace{-3mm} \rule{\linewidth}{0.5mm} \\[-4mm] } Using babel, I can get this code to work: ...
4
votes
2answers
346 views

How to change chapter font style in the middle of the Table of the Contents?

What I do have, is grouped frontmatter entries (chapter-like) in ToC, and the rest of the chapters have larger vertical space. What I want is to change the font style of the grouped part to, say, ...
4
votes
2answers
418 views

Replace (change) “Chapter 1” to “Chapter ONE”

I am writing a lab report, and select report class provided by LyX. I use LyX 2.0.3 and MiKTeX 2.9. My question is, how to change the chapter number to display as text? eg: CHAPTER ONE not CHAPTER ...
5
votes
1answer
143 views

Remove Formatting in Table of Contents

I have custom colouring in the section headings, i.e. \section{\textcolor[red]{Heading}}, so when I use \tableofcontents it prints the table of contents including all the unnecessary colouring. Is ...
2
votes
1answer
67 views

Modify tex file to move chapter headers upper

I'd like to modify this code to make chapter titles appear uppper, so more text can get into the first chapter page and modifiy the TOC adding dots from the title to the page number. How can I do it? ...
2
votes
1answer
2k views

Edit a default latex/beamer theme to show section numbers

I am using beamer to create a presentation. The theme I chose is Singapore. It has a nice header with section names and bullets for subsections. What is the easiest way to modify the header so that ...
3
votes
1answer
343 views

ToC width, small \MakeUppercase font in a header, dots next to chapters

How to get ToC widther? 1a. How to get ToC higher? [more space under the chapter, before a next chapter] How to add dots next to the chapters? How to put on odd sides name of current chapter but ...
7
votes
1answer
135 views

Page Number Spacing Issue With Titletoc

I'm new to LaTeX and I could use a bit of help. I'm using the report class and I'm trying to color the chapter headings a green I have defined. I don't really want to change the default formatting, ...
24
votes
1answer
2k views

Book layout Contents, Chapter, Section,

my goal is to get new style of Table of Contents, new style of Chapter and new style of section. I there is one more: how to change itemize native symbol for a black square? Table of Contents: text ...
3
votes
1answer
282 views

Table of contents broken with Koma Script and lstdoc

There seems to be some negative interaction between Koma Script (using version 3.11a) and the lstdoc package in my example document. The MWE works nicely when I comment out \usepackage{lstdoc} but ...
0
votes
1answer
203 views

Help formatting table of contents, left margin numbers, again

I would like to modify the answer that I got in this thread here such that I have the subsection numbers in the TOC but not in the text. I do not completely understand the workings of the code I was ...
9
votes
2answers
7k views

Format ToC for thesis

I apologize for the unspecified and broad question but I have no way to be specific. I'm looking to generate the TOC and List of Figure, List of Table according to the format required by my school. ...
1
vote
0answers
90 views

Contents, List of Figures: hyperref on the page number [duplicate]

Possible Duplicate: Avoid hyperlinked TOC if hyperref is used In the process of finalizing a book I observed that it would be much better if I could translate the hyperref from the, e.g., ...
10
votes
2answers
1k views

Why are \listof{}{} and \listoffigures styled differently?

I'm writing my thesis and I have certain code-snippets to show. I'm using the the listings package embedded in a custom float environment to display them. To list them in an index at the beginning of ...
7
votes
2answers
724 views

LaTeX contents page: hiding specific page numbers automatically

Is it possible to have a contents page in LaTeX that doesn't show a page number of a particular subsection, if the one immediately before it shares the same page number? e.g. If there are 3 ...
11
votes
5answers
1k views

Change title to small caps but not in ToC

I want the title for the Acknowledgements page in my thesis to be in small caps. However, if I change it, it also changes in the table of contents. How can I avoid this? Especially, the roman page ...
6
votes
1answer
972 views

Modifying mini-toc content

I have adapted the pretty table of contents solution written by Gonzalo Medina with the modification to the "blue box style" that Stephan Lehmke helped me with to design a somewhat consistent ...
5
votes
1answer
680 views

Customizing table of contents in memoir

I have a table of contents in my memoir document, but I want to slightly alter the way it appears: 1) I want to decrease the spacing between chapters (now it looks double-spaced; I want something ...
5
votes
2answers
762 views

use Times new roman font in TOC when using \usepackage{tocstyle} \usetocstyle{allwithdot}

I need my TOC all in Times New Roman but my section titles are changed when using \usepackage{tocstyle} and \usetocstyle{allwithdot} I had to try to use tocstyle because my section titles are long ...