{table-of-contents} is about the creation or modification of the Table of Contents or similar listings like List of Figures and List of Tables as well as custom lists. Popular packages are {tocloft}, {titletoc}, and {minitoc}.

learn more… | top users | synonyms (4)

3
votes
2answers
27 views

Add “Part” string to `\part` list in TOC

Following on my previous question here, I would now like to add the string "Part" to the TOC. Using a modified thesis style and \documentclass{report} which dictates how the TOC appears. I have tried ...
2
votes
2answers
40 views

Correct use of hyperref and addcontentsline

I am having some issues with the hyperref package. I would like to create a Introduction chapter without a number so I use \chapter*{Introduction} and \addcontentsline{toc}{chapter}{Introduction} ...
2
votes
1answer
30 views

List of listing (using tcblistof) vertical spacing, group by chapter

I'm currently trying to set the vertical spacing within \tcblistof command. The template which causes my problems can be found here: https://github.com/ManuelRauber/LaTeX-Template At first here are ...
0
votes
0answers
70 views

How can i change “Table” words in the list of table to bold?

I am preparing a thesis format for my university. They want bold all Table words in list of tables. Relevant part of the codes given below. \def\listoftables{\thispagestyle{empty} \oneandhalfspacing ...
0
votes
0answers
34 views

How do I make the first Part and Section in my ToC appear without a number to their right?

In the preamble I have: \documentclass[11pt,a4paper]{book} \setcounter{secnumdepth}{4} \setcounter{tocdepth}{4} \setcounter{part}{-1} \setcounter{subsection}{0} Which works out great for the Part ...
4
votes
1answer
48 views

How to NOT print some of the sections in Table of Contents?

So basically I want to create a Table of Contents in my latex document (class - article). But I don't want the first half sections to be printed. For examples, suppose there are four sections in my ...
1
vote
2answers
62 views

Chapter numbers not showing on page, but showing in TOC

In my multi-chapter document, I have child docs that all use \chapter but the chapter number is not showing, just the chapter title. However, the numbers do show in the TOC. Below is the MWE for the ...
0
votes
0answers
21 views

Extented titles for subsections gets my TOC all pilled-up

Some of the sections and subsections of my work has extended titles, i.e.: \section{bla bla bla ....... bla}, so when pdflatex creates my pdf, the toc gets all pilled-up, as show in picture. How ...
0
votes
1answer
16 views

How to adapt Contents header to match other chapter headers

I am using \documentclass[a4paper,11pt,twoside,openright]{book} and customized my headers using \usepackage{titlesec, blindtext, color} \definecolor{gray75}{gray}{0.75} ...
4
votes
2answers
78 views

Changing the order of TOC entries

I am typesetting lecture notes in which I want to keep in chronological order and I've got the problem that there is something which belongs to chapter 2 after chapter 3. I would like the table of ...
7
votes
2answers
48 views

ToC with different title from part title in document

I'm using the code below for my \part heading style. I want to be able to modify what appears in ToC as my part name. Possibly put a different text there and also modify its font style (size, shape ...
1
vote
0answers
22 views

Longtable LoT 'Table' caption [on hold]

I am writing my master thesis using the provided styles by the faculty. Some of my tables were too long, so I used longtable package. However, in list of tables, tables created with longtable don't ...
5
votes
2answers
333 views

Dot after thechapter in the ToC, but not in the body text?

How do I add a dot after thechapter in the ToC, but have no dot after thechapter in the body? Here's an MWE: \documentclass{book} \usepackage{fontspec} % enagles loading of OpenType fonts ...
4
votes
1answer
76 views

ToC entry formatting

I'm using the code below to redefine my \part style. I want to modify it so that I see "Part I: A Test ... " with \scshape font in the TOC. Right Now, in the TOC I see "I A Test ... ". How should I ...
3
votes
1answer
77 views

Line spacing in ToC, LoF, and LoT

I am currently writing my thesis in Latex and the thesis is supposed to be double spaced, so I have used the \doublespacing command in my latex file. The problem: Chapter or Section Titles, Figure ...
32
votes
4answers
21k views

How can I display a short chapter name in the header and a long chapter name in the ToC?

I am writing a book and one of my chapter has a very long title. As it can't be displayed correctly on the top of even pages, I provide a "short title name" via the \chapter[short title]{long title} ...
1
vote
0answers
24 views

Add “Chapter” to the table of contents. Report class [duplicate]

I currently have my ToC formatted exactly as I need it except I need the word "Chapter" to appear before the chapter number. i.e: I want to see Chapter 1: Title instead of 1: ...
6
votes
1answer
49 views

TOC entries in Small Caps

I want to have my TOC entries in Small Caps. I cant get by using \textsc{\tableofcontents} rather than \tableofcontents but this adds a blank page before TOC. Any help will be highly appreciated. ...
3
votes
2answers
51 views

Remove label A from Appendix

I'm using the appendix package to format my thesis. The issue is in the naming of the Appendix within the TOC. Currently it looks like this: APPENDIX A LIST OF ...
0
votes
1answer
34 views

Trouble adding appendix to ToC

I'm trying to add the appendix to my thesis and I've used the following commands: \begin{appendices} \chapter{Performance Tables of ABCD} \input{tab1} \input{tab2} \input{tab3} \input{tab4} ...
0
votes
0answers
28 views

Formating the title page and table of content

in my Master thesis, I would like to have title page without any page number and an acknowledgment and table of content with roman number, and then begin my text with numbers I have tried this, that ...
1
vote
1answer
26 views

Editing the Minitoc to include the word Page above the page numbers

I have browsed through the manual for the minitoc and I haven't been able to find whether there is a way to do the following: For the TOC it is possible to add the word Page above the page number ...
0
votes
1answer
43 views

lines within TOC

I want to insert two parallel lines before and after part titles in the TOC (see the picture below). Is there and easy way to do it? I'm using \documentclass{book}. How about inserting the lines ...
0
votes
0answers
20 views

Additional TOC for PDF attachment

in my document I have several PDF-Files which I want to attached at the end of my document. I do this with \usepackage{pdfpages} and \includepdf[pages=-]{08_Attachment/UC001.pdf}. BUT, before all the ...
2
votes
1answer
123 views

Creating List of Notation

I have been using LaTex for a while however I am new to writing a new command. Essentially I wanted to make a list of notation for my thesis. I have seen quite a few styles of nomenclatures, but none ...
0
votes
0answers
33 views

table of contents has wrong section references (scrreprt)

I noticed wrong references in my toc of my document. I'm trying to provide an MWE as goog as possible. Here's my code: ...
4
votes
1answer
31 views

Table of contents only on right-hand side pages

I need to have a table of contents only on right-hand sided (even) pages, a goal similar to what was described here: Table of content only on right-side pages. However, I have a table of contents ...
3
votes
1answer
96 views

Using tikz to create fancy Table of Contents

I am trying to create a fancy thesis style and I am stuck in the table of contents. I am adopting Pluton's idea from How to customize the table of contents using TikZ? but I get an error stating that ...
5
votes
2answers
77 views

How to make \tableofcontents look like table as in the figure attached below

In latex, the toc comes without border but the firm where I work requires me to follow the toc in this format. Any help will be appreciated. \documentclass[11pt, openany, oneside]{book} ...
3
votes
1answer
31 views

Beamer frame with two columns and sequential uncover of toc sections

I know that there is already this question, but I couldn't apply the answer on my problem: I want to uncover the sections that first section, than second section, ... , than 10th section will uncover ...
5
votes
2answers
44 views

Formatting list of figures with no space on left side

Basically I want this: Abbildungsverzeichnis Abbildung 1: somecaptiontextxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx.........................................................34 ...
2
votes
1answer
29 views

Same style (eg., Bt Charter, no bold style) between chapter/section/etc and ToC/LoF/LoT

I recently noticed the difference between the chapter/section/subsection font style and those in ToC, and also the style in LoF and LoT, it seems that bold style is dominant in the latter. What is the ...
3
votes
0answers
47 views

Formatting the Table of Contents (Remove “Page”, add periods)

I would like to remove the column heading "Page" from the table of contents. I have looked around and cannot seem to find an answer (or a similar question). I would also like to add a period "." ...
5
votes
1answer
80 views

How to get the sum of all sections and subsections in beamer

I want to determine how many pages I need for my toc which will be displayed in two coloumns with 10 (sub)sections each page. So if I had 8 sections and 20 subsections the code should return 28. ...
1
vote
1answer
48 views

Wrong page numbering for list of figures and list of tables in Table of Contents!

I know other people have asked this question but having scanned through the answers there seems to be two solutions: compiling 3 or 4 times and trying out some snippets of code involving the \markboth ...
1
vote
1answer
43 views

Adding different entities to a table of contents, part 2

This is a follow-on to the question: Adding different kinds of entities to table of contents As I build a huge document, things don't work as in the MWE from the previous problem. I stripped out the ...
2
votes
2answers
86 views

Table of contents like

I have a list of "mini-paragraph" for example: id:Object1: Title:xxxx Author:yyyy ecc.. id:Object2: Title:xxxx Author:yyyy ecc.. I don't need to put the id in tableofcontent but i need to create a ...
2
votes
0answers
52 views

Hyperref linking to wrong item in TOC(Lyx)

I added the hyperreff package and a TOC to my document using Lyx's built-in options. It seemed to work almost perfect except one problem: the first item in the TOC is linked to the page of the second ...
4
votes
1answer
40 views

Chapter font in TOC with package quotchap

I cannot get the chapter titles (not the label) in bold and Large font in the TOC, while using quotchap. I get the label "Chapter" in a good font (using titletoc), but not the title which stays in the ...
0
votes
0answers
20 views

Bibliography: undefined control sequence with biber [on hold]

EDIT: I understand why bibliography is printed twice: this is a memoir class feature so just delete the \addcontenstline code. Still don't know why I get undefined control sequence. EDIT 2: Maybe ...
5
votes
1answer
70 views

LaTeX songs use tableofcontents

Is there a way to change the code of the songs package, so that it will add all the songs to the default tableofcontents instead that the user has to use the index system? Something like that didn't ...
0
votes
1answer
93 views

Vertical space in TOC (references entry)

The references entry has a vertical space in the TOC page, something like that How could I remove this space and make the references section just like a chapter in the TOC?? I'm using the memoir ...
1
vote
0answers
18 views

Hyperref: Both Bibliography and Index entries in ToC are linked to Bibliography

Problem Statement I use BibTeX for the Bibliography, makeindex for the Index and hyperref to create the hyperlinks. In the .pdf file that I get after compiling, all hyperlinks (e.g., ToC entries, ...
3
votes
2answers
700 views

Remove dots from TOC, have page numbers right after titles

When looking for some inspiration for how to come up with a template for my thesis, I came across the wonderful classicthesis package. Since I'm working on some very progressive material, however, I ...
3
votes
1answer
63 views

Custom table for own commands

I have created following four command and using them just below \section \coursename{Mathematics for Biotechnology/Food Technology-I} \credit{4} \lecture{3} \tutorial{1} \lab{0} I want to generate ...
2
votes
1answer
46 views

Hyperref - links in TOC link to one page before the right page

I use hyperref for my entries in the TOC to be link. But with the example below, I have a problem: \item{\textbf{item one}\addcontentsline{toc}{subsection}{item one}\\ Lots of text... } ...
2
votes
1answer
97 views

Adding tables to list of tables with custom chapter breakdown

Running the code below is supposed to modify my list of tables to show the Chapter number above each set of tables related to that chapter. \usepackage{etoolbox} \preto\table{% ...
2
votes
2answers
59 views

LaTeX table of contents header spacing

Here is my issue. The code below, which I found on a pdf devoted to memoir class title pages, compiles to form this: Unfortunately, the Table of Contents is a bit too low for my liking. I'm hoping ...
5
votes
2answers
60 views

How can I have sections and subsections aligned in the table of contents?

\documentclass[12pt,headings]{article} \begin{document} \tableofcontents \section{section A} \subsection{subsection A} \subsection{subsection B} \end{document} I want section A and subsection A,B ...
1
vote
1answer
86 views

Adding different kinds of entities to table of contents

I have a number of different kinds of entities in a document using the book documentclass. There are Chapters, Labs, Appendices, etc. Just taking labs as an example, I created a newcommand that ...