0
votes
1answer
22 views

Footnotes next to each other in a sideways table?

How can I put footnotes next to each other in a sideways table? The para option for footmisc does not work here. Minimum working example: \documentclass[11pt]{article} \usepackage{rotating} % to ...
2
votes
1answer
27 views

Align text in multiple rotated multicolumns

I have a table with figures and rotated text in the first two columns. I don't understand 2 issues: How I can align and especially center the text? With the images I included (all same size and ...
4
votes
3answers
94 views

Vertical text in multirow

I'd like to realize the following: But I can not bond the vertical text and the line together. I use a tabular environment and this is what I get: My code is this: %!TEX program = xelatex ...
5
votes
0answers
70 views

Multirow cells with centered multiline text

I use tabu package to easily typeset tables. Now i need to typeset long table. So i used longtabu. The head of the table consists of much columns. Also there are lots of text in each cell and some ...
0
votes
0answers
36 views

How can I change the vertical alignment of a rotated deluxe table?

I am working in AASTeX using the deluxetable package. I have a deluxe table spanning several pages which I have rotated (using \rotate) to the landscape orientation, but the right edge of the table is ...
3
votes
2answers
75 views

Sideways in table

I created this table: with this code: \begin{table}[htbp] \centering \caption{} \begin{tabularx}{\textwidth}{L*{2}C} \toprule Propriedade & Equipamento & ...
4
votes
1answer
55 views

How to center cells vertically in sideways table?

I'm trying to build a comparison table, I want to center the symbols vertically on the cells and I tried a lot of methods that I found here unsuccessfully. This is the last code: ...
2
votes
1answer
53 views

Two rotated tables in one page

I'm writing a paper using the IEEEtran style, which uses two column per page. At some point, I had to make some two big tables, so I used \sideways to rotate them. The pages' height fill all ...
4
votes
2answers
123 views

two rotated tables on same page as heading

I am sorry, there seems to be a similar question already, but I didn't get the answer. I have a chapter heading and then two wide but short tables with captions, which I would like to rotate. But ...
3
votes
1answer
41 views

Sidecaptions next to sidewaystables

I'd like to place a caption left/right next to my table which is rotated by 90 degrees. So the caption should be next (e.g. bottom right) to the table and both, the caption and the table should be ...
3
votes
3answers
98 views

rotate table (90 degrees) and stretch to fill whole page

i'd like to rotate a table (90 degrees) and stretch it to fill whole page. That's what i've got so far: \documentclass{book} \usepackage{tabularx} \usepackage{adjustbox} \begin{document} ...
4
votes
2answers
76 views

Rotating text at the side of a table?

In the following code I want to rotate the text 'Probability' 90 degrees and have it in a column to itself at the left hand side of the table. I would also like vertical bars either side of the top ...
2
votes
1answer
60 views

How to horizontally align text in rows below rotated text?

I have a table with rotated text in the uppermost columns, however in certain rows the X's are not horizontally centered. I thought that having the \centering or perhaps the origin=c command would ...
0
votes
0answers
21 views

sidewaystable doesn't fit on page [duplicate]

I have the problem, that my sidewaystable doesn't fit on the page. It is moved to the left. Can anyone help me? Here is a minimal example of what my table looks like in my document ...
7
votes
3answers
143 views

How to horizontally align rotated text in a table?

I am trying to horizontally align text that has been rotated in a table. I want the rotated "Lorem Ipsum" and the rotated "Lorem Ipsum & Lorem Ipsum" text to be horizontally centered in the cell. ...
3
votes
1answer
71 views

How to vertically align text

I am trying to vertically center text in a table but when I try to use vspace, the entire row is shifted instead of just one cell. I have copied the latex below that will demonstrate the effects if ...
5
votes
2answers
67 views

Vertically spelled words in a table

I have made the following table in LaTeX. In order to vertically rotate the headers (extraction/production, transportation,...) in the table I have used the \rotatebox command. However, I would like ...
2
votes
1answer
81 views

White space between caption and sidewaystable

I am using a sidewaystable from the rotating package. I am trying to add some white space between the caption and the table (caption is placed above table). I tried using ...
1
vote
2answers
54 views

Rotate text next to right brace in multirow environment

The following LaTeX creates a simple table with some rows grouped with a right curly brace: \usepackage{multirow} \usepackage{bigdelim} ... \begin{tabular}{l|l|l|r} \hline $a$ & $b$ & ...
3
votes
2answers
76 views

Rotated multipage table at start of chapter

I'm working on an article in which I have to put a large and wide table. This table is directly at the start of a new chapter. Because it is very wide, I want to rotate this table (or use it in a ...
5
votes
2answers
65 views

Table headers colliding with table title

I have a table that has some vertical column headers, but they keep colliding with the table title. I've tried making the top row taller but that did not help the solution, simply moved all the text ...
0
votes
0answers
91 views

How to put table in portrait mode?

I put the table as below but it is coming out in landscape mode....else it ll go last page.... I need to have the table in the middle of my document and it should be in portrait. The code I have used ...
2
votes
0answers
39 views

how to rotate wide table in page thatnot outside of page

My table is very wide and gets the outside of the page how to rotate table that placed landscape. \begin{table}[!h]‎ ‎\centering‎ ‎\footnotesize‎ \caption{}\\‎ ‎\label{tab11}‎ ...
2
votes
1answer
113 views

Text in long multirow is not vertically centered

I have a large table, and the first two cells are multirow cells which span the height of the table. Instead of centering properly, they are centered in the top portion of the table, and I am ...
10
votes
3answers
242 views

Special Table with Diagonal lines [duplicate]

Recently, I have to work with some problems that require to draw table like below in LaTeX. I used to think about diagonal line inside a cell, but it's not a good choice for this problem since the ...
1
vote
1answer
166 views

sidewaystable doesn't fit in a page

How could we fit these tables into a page each? TABLE 1 \begin{sidewaystable}[ht] \centering % used for centering table \begin{tabular}{l c c c c c c c c c c c} \hline %inserts double horizontal ...
2
votes
0answers
235 views

Rotate Figure using sidewaysfigure according to page number

I have a lot of tables and figures to include in my thesis. I am using sidewaysfigure to include them in a full-page landscape view. I need to put 90 degrees-oriented figures if the page is on the ...
6
votes
2answers
322 views

How put together rotated table and paragraphs in a same page in LATEX?

I use "rotating" package to rotate my table in LATEX. It rotates my table in a page lonely. I want to put paragraphs in right side of the rotated table. Is there any solution? my used code is: ...
5
votes
2answers
823 views

Two sideways tables on one page

I want to put two sideways tables next to eachother. For landscape this is possible by putting the two tabulars in one landscape (How to put two tables in one landscape page). Is something like this ...
1
vote
2answers
91 views

Trying to make a horizontal table puts the table off the page, how should it be used?

I tried landscape, sideways, sidewaystable but they place my table (without turning) outside of the page (see bottom for picture). I'm using sharelatex to make my pdfs, could be a problem with that. ...
0
votes
1answer
69 views

Table lines and alignment problem

I'm using sidewaystable environment with the following configuration: \documentclass[a4paper,oneside,12pt,openright,final,oldfontcommands]{memoir} \usepackage{multirow} \usepackage{booktabs} ...
5
votes
1answer
176 views

How to adjust the width of a wrap text sideways column header in tabular [duplicate]

I am trying to create table as below, in Texmaker. here i am facing following issues. To wrap text the column headers from 4 to 6 and align it center. Hspace on paragraph [row 3 last column] is ...
2
votes
1answer
152 views

How to vertically center a table cell content when using sideways?

I have the following table: \documentclass{article} \usepackage{graphicx} \usepackage{multirow} \usepackage{adjustbox} \usepackage{rotating} \begin{document} \begin{table}[htbp] ...
4
votes
2answers
596 views

Sideways (rotated 90 degrees) label for table

How can I create the following table in LaTeX? I created the table below using PowerPoint. Here is my best attempt at using LaTeX to create the table: \begin{tabular}{l|l|l|} \cline{2-3} ...
2
votes
1answer
251 views

tabularx with rotatebox and top-alignment

I would like to write a table with column name in a rotatebox. The problem is that I can't make the row title in 2 lines and rotated and then, the content in itemize is not top-aligned. Can you help ...
3
votes
2answers
169 views

sideways column type based on column type c

I'm trying to create a sideways column type based on column type c. At the moment it looks like this: I want to put the expression "long word" in the vertical middle of the column and remove the ...
2
votes
1answer
583 views

Chapter title and rotated table (with subtables) on the same page

My problem is quite similar to the one described in Problems with landscape mode and Title on the same page. The hvfloats solution suggested there does not work for me, however, because I use multiple ...
5
votes
0answers
1k views

Rotating package + sidewaystable + pagenumbering not rotated expected

This question is similar to: Set up sidewaysfigure to have the bottom of the figure toward the spine but that question doesn't give me the result I'm looking for. Instead, I want my tables to be ...
3
votes
1answer
270 views

Wrapping text in Sidewaystables

I'm trying to make a rotated table using the sidewaystable package, and I cannot get the text to wrap. It compiles, but it I haven't been able to wrap the text within the columns or define the width ...
3
votes
1answer
156 views

Making rotated adjustbox fit into cell

I tried \rotatebox, but was unable to make the rotated text vertically fit into one cell so I opted for \adjustbox instead. \documentclass{article} \usepackage{float} \usepackage{multirow} ...
4
votes
1answer
128 views

LaTeX: Rotated header lines in table beginning in the same line

i have a table with rotated text. All these header lines should start near the second \hline (similar to "Abs.") like hline C BC BCD 1 BCD l BCD o BCD Frequency CABCD Abs Rel hline ...
1
vote
0answers
112 views

Infinite Loop in Babel with Rotating Sidewaystable [closed]

I don't know whether this is a babel or a rotating bug, and I have filed a report with Debian (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=710031), but perhaps someone knows a workaround. The ...
4
votes
1answer
155 views

wrapping a rotated table

I have a rather wide table that doesn't fit to page width, so I rotated it. The fit is nice, but my idea was to have text wrapped around this rotated table. So far I found two choices that are ...
2
votes
1answer
145 views

text grouped style in sidewaystable

I have a problem with my sidewaystable. I have quite a lot text in one of my columns. I have used tabularx so that the text doesn't run out of the page at the right side. Now the text is in grouped ...
4
votes
1answer
160 views

Shift table up after rotating

I am using \rotatebox to rotate a table 90 degrees counter-clockwise on a portrait page. I am able to center the table horizontally, but not vertically. It sits at the bottom of the page below the ...
6
votes
1answer
304 views

Tabulary on a rotated page does not use correct \textwidth

I'm trying to have a tabulary-table on a landscape page in a portrait document. Because I want to have the table use the full width, I tried to set it width to \textwidth, but the width of the table ...
17
votes
2answers
766 views

Creating a triangular table

Is there a way to create something that looks like this? I have looked at the \rotatebox command, but that will not get the same "jagged" edges on the bottom, and looked at How to draw a ...
1
vote
1answer
1k views

Centring a sidewaystable both horizontally and vertically

I'm trying to have a sideways table at the end of my document, however I can't seem to get it to centre to the A4 page perfectly like intended. Here's my preamble: ...
2
votes
2answers
211 views

How to align rotated table texts?

I turned the captions of my table by 90 degrees. Unfortunately, the headings do not fit to the table contents. Screenshot: Can this be changed? I already tried parbox but that did not work. Here ...
18
votes
3answers
5k views

How to make table with rotated table headers in LaTeX

I saw a table created in PowerPoint and wanted to know how to do it in LaTeX. The table is shown below. The aspects of the table that I'm most interested in are the rotated table headers as well as ...