5
votes
1answer
46 views

Dynamically calculated Row height in Tables

I am trying to dynamically allocate the height of rows in a table based upon a number, specifically the number of minutes that are devoted to a specific activity in a class lesson. The table ...
5
votes
3answers
53 views

Long list of tabular figures inside minipage goes off page

Using the follow MWE, I'm able to create a beautiful lists of photos on the left and a caption on the right (similarly, I could also use the sidecaption package or floats directly). MWE [LuaLaTeX]: ...
4
votes
2answers
67 views

Tabular cells with exact same width and multicolumn

I tried to design a table with some very specific preferences: The table should span across the whole width Each cell can have a different alignment Each cell has exactly the same width Some cells ...
2
votes
2answers
73 views

Overfull \hbox (15.0pt too wide)

I have multiple tables which look like this: \begin{tabularx}{\textwidth}{|l|X|l|} \hline \textbf{ID} & \textbf{Description} \\ \hline 336858 & The description \\ \hline \end{tabularx} and ...
1
vote
1answer
52 views

tabularx “Missing number, treated as zero” error

error: ! Missing number, treated as zero. } l.16 \begin{tabularx}{\textwidth} {x x x x} MWE: \documentclass[12pt,a4paper,fleqn]{book} % ...
6
votes
1answer
37 views

Unwanted padding in tabular columns when cells contain multiple rows

Whenever I need to create a cell with multiple rows in a tabular environment, I usually create enclose the contents of the cell within a tabular environment within the cell. This has been a great fix ...
5
votes
2answers
70 views

Problem with subcaptions in subtables

I am trying to implement a table with several subtables, but working with subcaption does not work neither when I try tabularx. This subtables have different number of columns. with the following code ...
3
votes
2answers
113 views

table with many columns

I have some questions about the below table: If I omit the margins, the table will completely get disordered. I want to have the two 4 columns in the middle to have a slight distance with each other ...
0
votes
1answer
55 views

Creating special table [duplicate]

How can I create a table such as following: I do not know how can I have A and B in the middle of four rows ?
5
votes
2answers
68 views

Table with multiple rows and columns

I just want to create a table with multiple rows and columns, here is a very suitable solution:Table rowspan and colspan, but can anyone help me to get a variable column width rather than the equal ...
4
votes
3answers
93 views

How do I fix this table?

The table is big in length and width, hence top and bottom of the table are chopped off from the table generated in a pdf file. Here goes the latex code. \documentclass{article} ...
0
votes
1answer
56 views

Alignment of multi-columns and line breaks within cells

I am failing to set up a complex APA table once again. Actually, I need a table like shown below: My current MWE: \documentclass[12pt,ngerman]{article} \usepackage[utf8]{inputenc} ...
4
votes
1answer
91 views

table badly too wide

I got a bad problem with the width of my table. I can't get the point why its so wide. I'm using latexmk. Here's my code: \documentclass[final,12pt,abstracton,oneside,a4paper, ...
2
votes
2answers
63 views

organize columns in table

I made a table with this code: \documentclass[12pt,twoside,a4paper,openright]{report} \usepackage[portuguese]{babel} \usepackage[utf8]{inputenc} ...
1
vote
1answer
102 views

Really big table troubles

I have a really big problem here. I have to insert a big table in a document. No matter how I tried to make it smaller, my boss does not want it to be changed. He made it using word, and I have to ...
3
votes
2answers
74 views

Itemize in tabular // minipage resulting in `Missing \endcsname inserted` error

The minipage solution of this accepted answer is also what I'm looking for, that is, this one :-) not this one :-( The commented-out part of the MWE below tries to implement that minipage ...
8
votes
4answers
152 views

specific table layout

I want to draw a table like this: with the table width being a portion of the line width, like e.g. 0.8 * linewidth. But I cant figure out how to do it. Anyone? edit: MWE: ...
5
votes
1answer
46 views

Create linewidth spaced three columned table with column alignment

I'm writing a two columned article: \documentclass[10pt, aps, prb, twocolumn]{revtex4-1} I would like to include a table which is as long as 1.\linewidth. The table should consist of three columns, ...
2
votes
2answers
76 views

vertically center text in a table

I've got the following table: \documentclass[11pt]{article} \usepackage{rotating} \usepackage[ lmargin=1.0in, rmargin=1.0in, tmargin=2.0cm, bmargin=2.0cm ]{geometry} ...
1
vote
1answer
76 views

Justified text and multicolumn size in tabularx

I'd like to create table with (a lot of) justified text and some multicolumns. My example is below. It works more or less... but I get lots of underfull \hbox notices, which I think it's because ...
3
votes
2answers
90 views

Remove vertical lines in the table unsuccessfully

I have created this Table: via the LaTex source code: \documentclass[onecolumn,amsmath,amssymb,nofootinbib,superscriptaddress,floatfix]{revtex4} \begin{document} \begin{table}[!h] ...
4
votes
2answers
152 views

Fixing a messed table

I am trying to make a table in Latex. Now I have combined most of my Latex experience in making this (I am still new) and I thought I was making good progress until I saw the end result. The problem ...
1
vote
1answer
74 views

Extra alignment tab error, on Table

I am trying to make a table in LaTeX. However, I get several extra alignment tab errors and I do not know why. I have searched here for similar problems but I only found extra alignment tab error ...
3
votes
1answer
91 views

Left-alignment of table caption. Forced to center

I am trying to get the table caption left aligned (as the first table labeled "parameter estimates" using tabularx), but in tabular* environment (also happens to my tabularx in the original document) ...
2
votes
1answer
49 views

Column width table in tabularx environment

This stuff is probably a bit cluttred, but anyways: The problem I am experiencing is that I would like to make a correlation matrix as the one depicted above, but the width of the maturity column ...
4
votes
1answer
220 views

Fancy colored array in LaTeX?

I would like to reproduce these kinds of arrays in Latex (probably with tcolorbox) but I have no idea how to achieve this. So is there a way to make these kinds of tables ? Note : I would like the ...
1
vote
2answers
78 views

Thick Lines on table

I've seen the answer someone posted and I implemented it, I would like to keep this configuration as I already based my word using this answer. Now, the question is, how can I make partial horizontal ...
8
votes
4answers
207 views

How to merge two tabulars into a single table the width of the column?

I am asking for advice on achieving two separate effects in the table environment. (1) I have two tables with a different number of columns. I need to merge them into a single table. I have this ...
5
votes
2answers
165 views

How to put numbers in parenthesis in the S column using siunitx package

In the following minimal code, when I replace the l columns by S I get an error message saying invalid-number!! Invalid numerical input '(4.36)'.!! See the siunitx documentation for further ...
2
votes
1answer
125 views

Table exceeds page width (tabularx and tabulary)

I'm trying to fit this table to the page width but I can't. I tried the tabularx environment and the contents got mixed. I tried also the tabulary environment: it's better, the contents are not mixed ...
4
votes
2answers
73 views

Anchoring Table (Tabularx) from the Bottom of Table

Can you anchor a table at the bottom, inline with text? I have another question posted which I seemed to have solved myself - List Numbering Through Multiple Tables - but I have since found my way ...
2
votes
0answers
51 views

breaking a tabular and aligning tabulars throughout the document

I have two questions. How do you break a tabular so that some of it lies on the previous page while the rest is on the next page. See sample tex file provided below. How do you align the tabular ...
9
votes
2answers
178 views

Framing cells vertically in a table

I want to add a box in a tabularx table that would frame several cells vertically. There is this post that shows how to frame cells horizontally (Framing cells in a table), but I cannot figure out how ...
2
votes
1answer
273 views

Annotating Tables With Tikz; Adding Arrows

I'd like to be able to draw an arrow with some text on top connecting two arbitrary (i.e. possibly non-right-/left-most, possibly nonadjacent) cells of a table with a left-looking arrow. In ...
3
votes
1answer
142 views

Annotating tables

I'm trying to annotate a table by highlighting and annotating the final column, yet once I use the\tabnode together with coloring I get misalignment. Either the content of the cell marked with ...
10
votes
3answers
327 views

Move tabular entry to bottom of row

How do I get the last column text to be at the bottom of the row? That is I want the XXX to be aligned with the line containing the arrow. I tried playing around with \multirow{3}{-3ex}{XXX}, but ...
4
votes
2answers
403 views

Automatic line-break in tabular

Sorry if I've missed the answer in another post, but I've literally spent 3+ hours googling this problem now. I'm making a tabular and I'd like to to automatically do a like break rather than going ...
5
votes
2answers
69 views

How to make table's height smaller?

I have a document with 3 tables on it. The tables look really nice, but I have one problem: they are too tall and so they overlap the footnote! I have tried reducing the size of the letters inside ...
4
votes
1answer
77 views

How to make 2 tables appear one next to another?

I have a document with three tables. These three tables currently are too long for the page, so I would like to make 2 tables appear next to each other and then make the third table appear below them. ...
3
votes
2answers
64 views

How to fix to force text to split in table?

I have a simple table in LibreOffice calc and I tried to convert it to latex using the Calc2Latex macro. Then using Latex I tried to improve it. However I cannot get the text correctly ! This is ...
1
vote
0answers
39 views

How can I align, break and fill tabular entries properly for my Curriculum Vitae?

I am trying to make a nice Curriculum Vitae in LaTeX but am having some difficulties with aligning, breaking and filling the tabular entries. A Curriculum Vitae has to be short and clear. I thus need ...
5
votes
3answers
157 views

How to make a table on more then one page by using the table environment

EDIT [Like some comments below are remarking the table environment doesn't allow tables over more then on page. However the solution works fine] I need to make a table over more then one pages. The ...
3
votes
2answers
139 views

How to have columns of different sizes using tabularx and make table respect page height?

I am using Kile and I am trying to learn how to use tabularx to have tables that fit within the width of my pages. However, I have two big problems: I have to use X for column size and therefore ...
1
vote
1answer
71 views

Avoid a weird error with ltablex

I'd like to have an table over many pages with the same headline. I use the tabularx package, and the ltablex is required according to link. However if I use ltablex I get sticky errors ! LaTeX Error: ...
2
votes
1answer
103 views

Force Kile to create tables that are inside the page width

I am using the Tabular Wizard on Kile to create a \tabularx environment for one of my tables, and I want it to fit inside a page. Currently this is my setup: {% ...
5
votes
3answers
173 views

Creating a special table with different row lengths in latex

How can I have a table like the following picture in latex?
2
votes
1answer
24 views

\the\thislevelcount is available inside a ForEachX loop, but \thislevelitem is not (the forarray package)

I'm trying to loop though a comma delimited list and print out the elements in a table. Here is the code that works half-way for doing this: \documentclass[10pt,a4paper]{article} % ...
11
votes
3answers
292 views

How do I use the ampersand (&) inside a foreach or conditional (or other group/environment) when building tables?

I am trying to build a table, and inside the tabularx environment I would like to have a loop, something like (here is a MWE): \documentclass[10pt,a4paper]{article} \usepackage{tabularx} ...
1
vote
0answers
42 views

Set Table width and separate some rows [duplicate]

I'm trying to make the table take the line width of the paper but I don't know how to do this. I want it to look like this: However, it's appearing like this: This is the script I used: ...
1
vote
1answer
80 views

Trouble creating basic tables

I am currently writing my dissertation in LaTeX, ran into a brick wall creating a simple table. I want it to look similar to this (Quick mockup done in Numbers) The main issues I'm facing resolve ...