{tabularx} is a package that defines an environment tabularx, an extension of tabular which has an additional column designator, X, which creates a paragraph-like column whose width automatically expands so that the declared width of the environment is filled.

learn more… | top users | synonyms

7
votes
1answer
118 views

using tabularx 2.09 in a \newenvironment produces errors

The tabularx package with new version 2014/04/22 v2.09 produces errors with the following code which compiled without errors before: \documentclass{article} \usepackage{array} \usepackage{tabularx} ...
2
votes
1answer
49 views

Column width table in tabularx environment

This stuff is probably a bit cluttred, but anyways: The problem I am experiencing is that I would like to make a correlation matrix as the one depicted above, but the width of the maturity column ...
4
votes
1answer
218 views

Fancy colored array in LaTeX?

I would like to reproduce these kinds of arrays in Latex (probably with tcolorbox) but I have no idea how to achieve this. So is there a way to make these kinds of tables ? Note : I would like the ...
3
votes
3answers
248 views

Wrap text in table column header AND fit table width to pagewidth

How do I get a table where the header in column 2 is wrapped, while keeping the width of the table = textwidth? As you can see from the attached figure, I have a long title for the 2nd column, which ...
1
vote
0answers
53 views

very long table - 31 columns to fit page

I'm a bit desperate after hours of trying without any success. I have an ouput from R, but the tables are way too wide, having 31 columns. Is there anyway of automatically splitting the table? Maybe ...
5
votes
3answers
187 views

How can I improve this table (using tabularx)?

I'm trying to make a table look pretty; more specifically, I want the 1st and 3rd columns to be 6-6.5 cm wide, and I want the second column to be only 1-1.5 cm wide. I also want minimal white space in ...
1
vote
2answers
78 views

Thick Lines on table

I've seen the answer someone posted and I implemented it, I would like to keep this configuration as I already based my word using this answer. Now, the question is, how can I make partial horizontal ...
4
votes
1answer
68 views

Shouldn't this table span the whole page width?

I have this table definition as part of a invoice \begin{tabularx}{\textwidth}[ht]{lXrr}% It worked fine for years until I have a very short word in the X column for the first time. Now my table is ...
2
votes
1answer
57 views

Performance question - Tabularx or manual column width calculation?

I'm using the tabularx package and the provided X column type to get dynamic column widths. Since the pdflatex run takes longer and longer, I'm wondering whether it would be faster to use an ...
1
vote
1answer
32 views

Using tabularx and xcolor

Is tabularx compatible with xcolor? I did the following: \documentclass{memoir} \usepackage[svgnames,hyperref,]{xcolor} % colors for hyperref \begin{document} \begin{tabularx}{1.00\linewidth}{X} ...
8
votes
4answers
207 views

How to merge two tabulars into a single table the width of the column?

I am asking for advice on achieving two separate effects in the table environment. (1) I have two tables with a different number of columns. I need to merge them into a single table. I have this ...
10
votes
3answers
623 views

How to create vertical and horizontal dotted lines in a matrix?

Similar to this question, I am trying to output a similar matrix with dotted line instead of dashed line. Is there anyway to do this? I also try to use these three packages: ...
9
votes
2answers
164 views

easylist in tabular

I'd like to build this table: As I have a very long list to itemize, I'd like to use easylist. Obviously the easylist-group causes problems in the tabularx-environment. That's what I coded so far: ...
5
votes
2answers
165 views

How to put numbers in parenthesis in the S column using siunitx package

In the following minimal code, when I replace the l columns by S I get an error message saying invalid-number!! Invalid numerical input '(4.36)'.!! See the siunitx documentation for further ...
2
votes
1answer
123 views

Table exceeds page width (tabularx and tabulary)

I'm trying to fit this table to the page width but I can't. I tried the tabularx environment and the contents got mixed. I tried also the tabulary environment: it's better, the contents are not mixed ...
0
votes
1answer
33 views

table - text centering

I made a table in my thesis with this code: \begin{table}[htbp] \centering \caption{Add caption} \begin{tabularx}{\hsize}{cc} \toprule & Folhosas \\ \midrule Celulose ...
4
votes
2answers
73 views

Anchoring Table (Tabularx) from the Bottom of Table

Can you anchor a table at the bottom, inline with text? I have another question posted which I seemed to have solved myself - List Numbering Through Multiple Tables - but I have since found my way ...
3
votes
1answer
85 views

List Numbering Through Multiple Tables

I am seeking to create a math workbook that looks similar to the picture below. I have included a selection of code I am attempting to get working - marked as MWE. My issue is that I want to continue ...
2
votes
0answers
51 views

breaking a tabular and aligning tabulars throughout the document

I have two questions. How do you break a tabular so that some of it lies on the previous page while the rest is on the next page. See sample tex file provided below. How do you align the tabular ...
9
votes
2answers
178 views

Framing cells vertically in a table

I want to add a box in a tabularx table that would frame several cells vertically. There is this post that shows how to frame cells horizontally (Framing cells in a table), but I cannot figure out how ...
1
vote
1answer
69 views

code-like strings with background color, and using tabular environment

I am going to create the following code-like strings with latex, with same background (gray), font, etc. How can I do this? I used listings package but inside \begin{lstlisting}...\end{lstlisting} ...
2
votes
1answer
271 views

Annotating Tables With Tikz; Adding Arrows

I'd like to be able to draw an arrow with some text on top connecting two arbitrary (i.e. possibly non-right-/left-most, possibly nonadjacent) cells of a table with a left-looking arrow. In ...
3
votes
1answer
142 views

Annotating tables

I'm trying to annotate a table by highlighting and annotating the final column, yet once I use the\tabnode together with coloring I get misalignment. Either the content of the cell marked with ...
10
votes
3answers
324 views

Move tabular entry to bottom of row

How do I get the last column text to be at the bottom of the row? That is I want the XXX to be aligned with the line containing the arrow. I tried playing around with \multirow{3}{-3ex}{XXX}, but ...
4
votes
2answers
394 views

Automatic line-break in tabular

Sorry if I've missed the answer in another post, but I've literally spent 3+ hours googling this problem now. I'm making a tabular and I'd like to to automatically do a like break rather than going ...
1
vote
2answers
84 views

Centering in tabularx columns

I am trying to do centering and text sizing in tabularx environment using the following definitions: \newcolumntype{b}{>{\centering}X} \newcolumntype{s}{>{\hsize=.25\hsize}X} However, when I ...
5
votes
2answers
69 views

How to make table's height smaller?

I have a document with 3 tables on it. The tables look really nice, but I have one problem: they are too tall and so they overlap the footnote! I have tried reducing the size of the letters inside ...
4
votes
1answer
77 views

How to make 2 tables appear one next to another?

I have a document with three tables. These three tables currently are too long for the page, so I would like to make 2 tables appear next to each other and then make the third table appear below them. ...
3
votes
2answers
63 views

How to fix to force text to split in table?

I have a simple table in LibreOffice calc and I tried to convert it to latex using the Calc2Latex macro. Then using Latex I tried to improve it. However I cannot get the text correctly ! This is ...
1
vote
0answers
39 views

How can I align, break and fill tabular entries properly for my Curriculum Vitae?

I am trying to make a nice Curriculum Vitae in LaTeX but am having some difficulties with aligning, breaking and filling the tabular entries. A Curriculum Vitae has to be short and clear. I thus need ...
5
votes
3answers
156 views

How to make a table on more then one page by using the table environment

EDIT [Like some comments below are remarking the table environment doesn't allow tables over more then on page. However the solution works fine] I need to make a table over more then one pages. The ...
3
votes
2answers
138 views

How to have columns of different sizes using tabularx and make table respect page height?

I am using Kile and I am trying to learn how to use tabularx to have tables that fit within the width of my pages. However, I have two big problems: I have to use X for column size and therefore ...
1
vote
1answer
70 views

Avoid a weird error with ltablex

I'd like to have an table over many pages with the same headline. I use the tabularx package, and the ltablex is required according to link. However if I use ltablex I get sticky errors ! LaTeX Error: ...
2
votes
1answer
103 views

Force Kile to create tables that are inside the page width

I am using the Tabular Wizard on Kile to create a \tabularx environment for one of my tables, and I want it to fit inside a page. Currently this is my setup: {% ...
5
votes
3answers
171 views

Creating a special table with different row lengths in latex

How can I have a table like the following picture in latex?
2
votes
1answer
24 views

\the\thislevelcount is available inside a ForEachX loop, but \thislevelitem is not (the forarray package)

I'm trying to loop though a comma delimited list and print out the elements in a table. Here is the code that works half-way for doing this: \documentclass[10pt,a4paper]{article} % ...
11
votes
3answers
292 views

How do I use the ampersand (&) inside a foreach or conditional (or other group/environment) when building tables?

I am trying to build a table, and inside the tabularx environment I would like to have a loop, something like (here is a MWE): \documentclass[10pt,a4paper]{article} \usepackage{tabularx} ...
3
votes
1answer
72 views

caption of the wide table not wide

I am using this code to produce a wide table, but the caption in top is still in two column format.I used \caption package but it affects all of my figures captions and never solve the problem. ...
1
vote
0answers
42 views

Set Table width and separate some rows [duplicate]

I'm trying to make the table take the line width of the paper but I don't know how to do this. I want it to look like this: However, it's appearing like this: This is the script I used: ...
1
vote
0answers
81 views

Lyx redefine tabular with tabularx - strange lines [duplicate]

I tried to redefine the tabular that is used as default for tables in Lyx. The reason is, I want to have an option for 'auto line break in cells'. That you can do with tabularx with the argument 'X'. ...
1
vote
1answer
80 views

Trouble creating basic tables

I am currently writing my dissertation in LaTeX, ran into a brick wall creating a simple table. I want it to look similar to this (Quick mockup done in Numbers) The main issues I'm facing resolve ...
5
votes
3answers
594 views

Table with arrows between cells

I want to create a table with arrows between some cells, for which I've used tabularx and TkiZ. I have the following problems: Text in cells aligned vertically to the center and at the same heigh ...
3
votes
1answer
76 views

Missing number, treated as zero in tabularx

I'm using a program to generate LaTeX code utilize the tabular package. It creates an error that reads ! Missing number, treated as zero. <to be read again> ## l.17 ...
1
vote
0answers
92 views

Tabularx inside of Table becomes wider than the textwidth

I have many tabularx enviornments and have been using \linewidth to keep the table width flush with the text width. I now have a need to insert these tabularx segments inside of a float table ...
1
vote
1answer
45 views

Fitting column headers on one row

I have the following table: \documentclass[12pt,notitlepage]{article} \usepackage{setspace} \usepackage{ifthen} \usepackage{booktabs} \usepackage{array} \usepackage{multirow} \usepackage{tabularx} ...
5
votes
2answers
151 views

Wrong width in multicolumn tabularx cells

I'm trying to create a table with fixed column widths. As most rows have a different number of cells (with LCM 12) I defined a 12 column wide table, where I add multicolumns of the wanted size. The ...
4
votes
1answer
167 views

How can I horizontally align checkmarks in a table column?

In my table I use different combinations of a checkmark standing alone, in parentheses, or with an asterisk. I would like to have a centered column in which the checkmarks align. By using the package ...
3
votes
2answers
145 views

Table of 2x2 tikzpictures defined by my own macro

As a follow-up question from this post I am trying to find out how to arrange multiple tikspictures in a table, where my diagrams are defined by my own macros. Problem: Showing the diagrams ...
4
votes
1answer
145 views

Add keys to table (with picture and code) [duplicate]

As you see in the red part of the picture, I would like to add keys to explain what the brackets stand for. I just added this with paint, but is there a way to do this in tex? Also, are there nicer ...
4
votes
1answer
51 views

tabularx - How to linebreak in the tabularx environment?

How can I add a linebreak between two tabularx environments in a single section ? \documentclass[a4paper, 14pt, oneside]{article} \usepackage{tabularx} % Nicer table style than the default ...