{tabularx} is a package that defines an environment tabularx, an extension of tabular which has an additional column designator, X, which creates a paragraph-like column whose width automatically expands so that the declared width of the environment is filled.

learn more… | top users | synonyms

3
votes
1answer
194 views

Using tabu/tabularx inside xparse NewDocumentEnvironment

My question seems very similar to this, but with tabu instead of tabular*. In fact, switching the options in that example causes the failure I see here. \NewDocumentEnvironment {trace} {} {% ...
3
votes
1answer
357 views

How to create a table where one cell spans all the columns and the text wraps properly?

I need to create a table like this: table with two columns and width equal to width of the page; border around whole table; first row spanning two columns; with background color, bold font and ...
1
vote
1answer
565 views

tabularx and tablefootnote multiple footnotes from one \tablefootnote

In my tablularx environment I have a footnote that I'd like to have placed at the bottom of the page. Using both the tabularx and tablefootnote packages all is well. However I get served a bit too ...
0
votes
1answer
3k views

Increase row height of tabularx [duplicate]

I'm using the tabularx package from within memoir for creating a table. I'm trying to set the row height and found for tabular the command \setlength{\extrarowheight}{40pt} However, with my ...
4
votes
1answer
283 views

tabularx within the enumerate environment

does someone know how to set the width of the tabularx table to the width of the text inside \item in the enumerate environment? \textwidth doesn't account for the environment
2
votes
0answers
345 views

Defining the position of a tabularx environment [closed]

In my report, I use a tabularx environment within a mdframed environment. I don't know why but I have to delete the table environment surrouding my tabularx environment when I want a table in my ...
4
votes
1answer
875 views

Table and \hlines too short or wide

Here is a MWE of what I am trying to do. \documentclass[a4paper]{article} \usepackage{tabularx,booktabs} \usepackage{color,colortbl} \begin{document} \begin{table}[htb] \centering ...
4
votes
1answer
2k views

Whitespaces in tabularx added after \extracolsep

I'm quite new to Tex, but I did some tutorials and I'm stuck now, after googling didn't help anymore. My code: \bgroup \def\arraystretch{1.75} \begin{tabularx}{\textwidth}{ | l | ...
4
votes
1answer
201 views

List of definitions

I have a plain-text document that I would convert to LaTeX. The document is not a typical text document but a list of definitions including some short prefaces and optionally "post-faces". Example ...
2
votes
2answers
157 views

How to *disable* Lua's Microtype for a given tabular column?

I'm looking for a way to disable Lua's Microtype (note the capital M - to distinguish from the lower case microtype package) in the first tabular column of the MWE given below: ...
3
votes
1answer
2k views

Question about \multicolumn in Tabularx

I have a table with two columns like this: \begin{tabularx}{\textwidth}{XX} test & test \\ \multicolumn{2}{l}{test} \\ \end{tabularx} However the multicolumn line does not function good ...
0
votes
0answers
26 views

Tabularx textwidth tables jump to last page [duplicate]

I am using tabularx to get a table that automatically stretches to the full width of the paper. However, my tables seem to be put at the last page when I apply this code (see below). How can I avoid ...
0
votes
1answer
320 views

Automatic table width doesn't work anymore

I got an odd problem since yesterday. I'm writing my thesis with Lyx. I'm using a template based on the KOMA-Script. Well, yesterday I've deleted a number of tables from my document. After compiling ...
1
vote
1answer
928 views

vertical alignment using tabularx / arraystretch

I am using the tabularx package to customize my tables. I changed the definition of tabularxcolumn to vertically center the text. As I am using arraystretch, the bold 'titles' of my table are aligned ...
2
votes
1answer
551 views

TabularX vertical alignment

Since the enumiten Package (and therefore leftmargin=*) doesnt work in custom environments, I was trying to trick a bit, doing the items in a table like this (don't ask..) : ...
2
votes
1answer
139 views

Non-Uniform Inter-Row Spacing in tabularx with p Cells

Take a look at the following picture: The Namespace column is typeset using a p cell. The page layout is in landscape mode. I've set the inter-row spacing explicitly to 20pt. However, since the p ...
2
votes
1answer
100 views

Problem with aligning using compactlist in tabularx

I've created a table with the tabularx package. Within the cells I use compactitem to create a list. First I had a problem with the leftmargin. To solve this I've used \setlength{\leftmargini}{0pt}. ...
3
votes
1answer
587 views

how to use fancyvrb Verbatim in tabularx?

When using tabular and p it is possible to insert Verbatim block in a table using minipage \documentclass[]{article}% \usepackage{fancyvrb} \begin{document} \begin{tabular}{|p{2in}|p{3in}|} ...
1
vote
0answers
135 views

Removing overfull and underfull box warnings [closed]

Always when I want to prepare a document with LaTeX I receive different warnings including underfull and overfull but I don't know how I can handle these warnings. As you can see here I have two ...
2
votes
1answer
142 views

Multicolumn cells in tabularx overfill into margin

I have this table in my MWE. In the 2nd table, the cell colors seem to bleed over into the margin. I have tried to set various parameters with the tabularx and in the multicol to reduce this but it ...
4
votes
1answer
333 views

tabularx \hline introduces blank line above

I am using tabularx and I successfully created some tables with it so far (not too nice ones, but thats another problem). One Table freaks me out, as the "header" is separated from the next lines not ...
2
votes
1answer
3k views

multicolumn command with tabularx environment

Apologies if I am posting to the wrong thread - I'm not a regular user of boards and I know you guys can get pretty annoyed when the answer to my question is already out there. I've been searching ...
1
vote
2answers
250 views

Oversize table with nested tabularx->minipage->tabular* has columns that are too narrow (Memoir)

I am trying to lay out a table heading that looks something like this: TITLE --------------------- subtitle Name Value description Name A value of Name Value ...
7
votes
2answers
893 views

table rescaling and subcaption package

I am placing tables side-by-side using the subcaption package in the following way: \documentclass{article} \usepackage{siunitx} \usepackage{booktabs} \usepackage{subcaption} \usepackage{tabularx} ...
3
votes
1answer
258 views

Making rotated adjustbox fit into cell

I tried \rotatebox, but was unable to make the rotated text vertically fit into one cell so I opted for \adjustbox instead. \documentclass{article} \usepackage{float} \usepackage{multirow} ...
6
votes
1answer
472 views

\bfseries and alignment in table

I'm trying to highlight some decimal-point aligned entries in two large tables which are arranged in two columns. I'm using \bfseries to do this and unfortunately this seems to be affecting the ...
3
votes
1answer
345 views

Package minted: \mint Command Not Working Inside tabularx Environment

The question, How to embed a minted environment inside a tabular environment?, addresses a similar issue, but I am using: the tabularx package, and the inline \mint command Is there a workaround ...
5
votes
2answers
117 views

Use a nested enumeration as a column of a table

I am creating a list of requirements in a table in which the first column should be an enumeration, such that each requirement is identified by a unique number. Some requirements also have sub ...
1
vote
2answers
7k views

Wrapping text in \multicolumn

I would like to wrap (and center) text within \multicolumn. Tabularx and tabilary only wrap the text outside of the \multicolumn{} columns. I would also like to define the column width as defined by ...
4
votes
1answer
189 views

Split a tabularx cell at its diagonal when the X column specification is used?

How do I split a cell diagonally, when I'm using tabularx with X column, i.e. \begin{tabularx}{\textwidth}{X}? I've seen many answers on this topic on TeX.SE, but none of them are applicable to cells ...
4
votes
1answer
266 views

Nested tabularx doesn't work with ltablex

This works: \documentclass{article} \usepackage[a5paper]{geometry} \usepackage{array} \usepackage{tabularx} \setlength{\parindent}{0cm} \begin{document} \begin{tabularx}{\textwidth}{ |X|} \hline ...
4
votes
3answers
476 views

tabularx syntax

First time using tabularx to create tables, my code is below: (which turns out to be very wrong!) \begin{table}[htbp] \caption{\textbf{Description of Regression Variables and Data Sources} \\ This ...
3
votes
1answer
197 views

Extra space between columns (fixed/predefined width and X) in tabularx

This is a follow-up question of: What is the right way to set predetermined column widths with tabularx? As seen in the code below, \begin{landscape} \renewcommand*{\arraystretch}{2} ...
5
votes
1answer
100 views

What is the right way to set predetermined column widths with tabularx?

I was just wondering about this, because I went over the tabularx documentation and I couldn't find an answer. So, there are several questions going on here: Is it better to use a proportion of the ...
1
vote
1answer
983 views

Footnote in tabularx doesn't work (with hyperref)

Here is the min file: \documentclass{article} \usepackage{tabularx}[1999/01/07] % v2.07 \usepackage{hyperref}% 2012/10/15 v6.83k \listfiles \begin{document} \begin{minipage}[t]{.5\linewidth} ...
3
votes
3answers
205 views

Reduce tab spacing

How can I reduce the spacing after I have used & in tabular? \documentclass{article} \usepackage{tabularx} \begin{document} \begin{tabularx}{\textwidth}{X X} \textbf{Greetings} & Refer to ...
3
votes
1answer
46 views

How can one adjust each text to the center for each box of the table?

Here is the example: \begin{tabularx}{\textwidth}{ |X|X|X|X|X| } \hline Equation & 2 & 3 & 5 & 7 \\ \hline $y_0 = b^{t}$ & -483061 & 1 & -174089 & 793599 \\ \hline ...
2
votes
1answer
214 views

text grouped style in sidewaystable

I have a problem with my sidewaystable. I have quite a lot text in one of my columns. I have used tabularx so that the text doesn't run out of the page at the right side. Now the text is in grouped ...
4
votes
1answer
441 views

tabularx: bottom alignment on r or l-columns when X column wraps

In tabularx, when the X-column wraps on more than one line, l/r/c-columns remains top aligned: MWE: \begin{tabularx}{5cm}{lXr} 1 & qwer asdf zxcv qwer asdf zxcv qwer asdf zxcv & 1 \\ 2 ...
4
votes
1answer
398 views

tabularx option in tcolorbox

I'd like to use the recently introduced (in version 2.10) tabularx key for the tcolorbox package. The key is documented in the tcolorbox documentation, section 3.6, paragraph /tcb/tabularx, page 28. I ...
3
votes
1answer
331 views

Why does ltablex skip a number in captions?

The below example presents two tables with an tabularx environment (taken from package ltablex) and a caption. After each tabularx-table, the table counter skips one, as if both the caption and the ...
2
votes
1answer
169 views

Last cell in complex table not behaving

I am having a hard time figuring out why the text in the last cell on each row of this complex table I am creating is not positioning correctly. As you can see from my code, the issue only occurs when ...
4
votes
2answers
1k views

Table with 100 % width and vertical / horizontal alignment

I want to draw the following table in LaTeX. In the first column the text should be left aligned. The text in all other cells should be centered. The first problem occurs with D in the first row. If I ...
3
votes
1answer
310 views

Editing Table in LateX

Below is a table I want it to appear it the top page of a two column page. But its not looking good so if anyone could please assist me. \begin{table*}[t] ...
6
votes
1answer
224 views

Table Configuration

I'm new to LaTeX, and I'm currently struggling with trying to create a table for a lab report. The table has to look like this: I have tried looking at the \tabular, \tabulary and \tabularx ...
1
vote
1answer
123 views

Onslide in tabularx produces vertical space

I have a tabular in a beamer presentation of which I want to uncover its contents using \onslide. In tabularx (or in tabular with a p-column) this produces a peculiar vertical white space in the ...
6
votes
2answers
2k views

Custom glossary style: Make glossary as wide as \textwidth

WARNING: This is a follow-up question to Display long form (first-use like) entries of none acronyme type entries. As mafp suggested in the other post I went ahead and defined my own glossary-styles ...
4
votes
1answer
2k views

Break multicolumn text at document margin with tabularx

I'm using tabularx to break the content of a column at the document margin (cf. Linebreak in table cell at document margin). But when I use \multicolumn in such a table, the instruction to break the ...
5
votes
3answers
1k views

\phantom inside tabularx

I tried to improve the alignment in the following table using a \hphantom: \documentclass{article} \usepackage{tabularx} \begin{document} \begin{tabularx}{\linewidth}{p{2.8cm} X} 1/00\,--\,2/00 ...
3
votes
1answer
1k views

How to create a dashed line in tabularx environment

I've been looking into this, and I have encountered two main "solutions": \usepackage{arydshln} As decribed here. And this one: \usepackage{dashrule} As described in this other post. However, ...