{tabularx} is a package that defines an environment tabularx, an extension of tabular which has an additional column designator, X, which creates a paragraph-like column whose width automatically expands so that the declared width of the environment is filled.

learn more… | top users | synonyms

2
votes
1answer
45 views

How can I place dot2tex graphs next to each other?

I have two dot2tex graphs that have a relatively large height and small width. The combined width of the graphs is considerably smaller than the text width. For example: ...
2
votes
2answers
113 views

vertically center text in a table

I've got the following table: \documentclass[11pt]{article} \usepackage{rotating} \usepackage[ lmargin=1.0in, rmargin=1.0in, tmargin=2.0cm, bmargin=2.0cm ]{geometry} ...
2
votes
1answer
661 views

Tabularx, Caption and Footnotes

I need to have some tables with the following requirements: The need to be of width \textwidth; The caption has to be on top of the table even at automatic page breaks; The tables should not float; ...
2
votes
1answer
291 views

Justified text and multicolumn size in tabularx

I'd like to create table with (a lot of) justified text and some multicolumns. My example is below. It works more or less... but I get lots of underfull \hbox notices, which I think it's because ...
2
votes
1answer
135 views

Beamer: tabular out of the boder

I am writing slides under beamer. A tabular is out of the boder of the slides. What shoud I do? Resize? \begin{tabular}{ccc} $\hat{\tmmathbf{v}}^1 = \frac{1}{\sqrt{N}} \left(\begin{array}{c} ...
2
votes
1answer
35 views

\the\thislevelcount is available inside a ForEachX loop, but \thislevelitem is not (the forarray package)

I'm trying to loop though a comma delimited list and print out the elements in a table. Here is the code that works half-way for doing this: \documentclass[10pt,a4paper]{article} % ...
2
votes
1answer
55 views

Fitting column headers on one row

I have the following table: \documentclass[12pt,notitlepage]{article} \usepackage{setspace} \usepackage{ifthen} \usepackage{booktabs} \usepackage{array} \usepackage{multirow} \usepackage{tabularx} ...
2
votes
1answer
112 views

LaTeX and Table formatting

\documentclass{article} \usepackage[english]{babel} \begin{document} Without specifying width for last column: \begin{center} \begin{tabular}{| l | l | l | l |} \hline Day & Min Temp ...
2
votes
1answer
132 views

How can fit a large table vertical with a picture?

I use column package to split sile to 2 column. one for picture and one for table. But my table was broken. Please help me fix it. Here is my code: \RequirePackage[demo]{graphicx} ...
2
votes
1answer
309 views

Table Numbering And Caption in Same location

My table and caption are located on the same line and this started happening after I used a different class file for the conference I am applying towards. Here is a picture of what I mean: (Normally ...
2
votes
1answer
135 views

Non-Uniform Inter-Row Spacing in tabularx with p Cells

Take a look at the following picture: The Namespace column is typeset using a p cell. The page layout is in landscape mode. I've set the inter-row spacing explicitly to 20pt. However, since the p ...
2
votes
1answer
2k views

multicolumn command with tabularx environment

Apologies if I am posting to the wrong thread - I'm not a regular user of boards and I know you guys can get pretty annoyed when the answer to my question is already out there. I've been searching ...
2
votes
1answer
198 views

text grouped style in sidewaystable

I have a problem with my sidewaystable. I have quite a lot text in one of my columns. I have used tabularx so that the text doesn't run out of the page at the right side. Now the text is in grouped ...
2
votes
1answer
727 views

newenvironment tabularx and begin center

I try to create a custom env, based on a tabular. I try to make a \begin{center} before my tabular to remove identation at the beginning of the tabular, but he tells me "File ended while scanning ...
2
votes
1answer
765 views

How to left align footnotes under tabularx in a minipage

I am new to LaTeX, trying to create a table using a tabularx in a two column format. I am creating the table in a minipage so that footnotes can appear at the bottom. Everything works out fine, but ...
2
votes
1answer
6k views

Subtables, column separate line draws out of table

I am using subtable environment to put two tables side by side. However, the column separate line between the first two columns draws out of the table. Anyone can help with this issue? Sample code ...
2
votes
1answer
2k views

Problem with vspace around table environment

I recently decided I wanted a caption for the top table, so I placed it in a table environment. When I did this, the \vspace*{-2.5cm} before the second table seemed to be ignored for some reason. Does ...
2
votes
1answer
22 views

Cannot use multirow with multicol together

I can't use multi-row with multi column, my aim in the following code is to have a two height row with the content A long header vertically centered in two rows, what am I missing here? ...
2
votes
1answer
41 views

Last column vertical rule missing

I'm dealing with the powerful tabularx environment. I was able to obtain a nice table, except for the last column. I need seven columns in total, but at the end I got another half column. I can't ...
2
votes
2answers
95 views

Vertically center tikzpicture in table

I'm tryin to vertically center a tikzpicture in a table. Here's a not-very-minimal example: \documentclass[12pt]{article} \usepackage[utf8]{inputenc} % UFT8 - danske bogstaver og andet godt fra havet ...
2
votes
2answers
64 views

Page-breaking of long tables with tabularx and booktabs in scrreprt documentclass

within my thesis I want to have a page break within tables that are very long, and which are created with tabularx and booktabs packages. Surprisingly I could not find any applicable solution for my ...
2
votes
1answer
91 views

Set column width to point

I currently have a tabularx table with four columns. I initialize the environment like this: \begin{tabularx}{\linewidth}{l p{0.4\linewidth} | l X l X} How could I change this so that the second ...
2
votes
1answer
90 views

Vertical aligment of dinglist inside table cell with `parskip`

Why is the list text so close to the top line of the cell in some lists? I know it's a problem with the parskip package. I can solve this by adding this strut in every cell before the text ...
2
votes
1answer
2k views

Table spreaded over multiple pages . Tabularx [duplicate]

To spread the table over multiple pages I know the utility islongtable But it seems that it doesn't work for tabularx . what is the solution. there may be duplication of question but couldn't find ...
2
votes
2answers
93 views

organize columns in table

I made a table with this code: \documentclass[12pt,twoside,a4paper,openright]{report} \usepackage[portuguese]{babel} \usepackage[utf8]{inputenc} ...
2
votes
1answer
90 views

Column width table in tabularx environment

This stuff is probably a bit cluttred, but anyways: The problem I am experiencing is that I would like to make a correlation matrix as the one depicted above, but the width of the maturity column ...
2
votes
1answer
866 views

Table exceeds page width (tabularx and tabulary)

I'm trying to fit this table to the page width but I can't. I tried the tabularx environment and the contents got mixed. I tried also the tabulary environment: it's better, the contents are not mixed ...
2
votes
1answer
99 views

Problem with aligning using compactlist in tabularx

I've created a table with the tabularx package. Within the cells I use compactitem to create a list. First I had a problem with the leftmargin. To solve this I've used \setlength{\leftmargini}{0pt}. ...
2
votes
1answer
185 views

extra alignment tab error

I just started using LaTeX last night, and I was trying to copy a general format I found on wikibooks. I wrote a python script to get 30 different stocks and their quotes, and I made it generate this ...
2
votes
1answer
267 views

Hyperref problem with enumerated tabularx rows

I was trying to do an enumeration with columns, which references one item from another one in the same list. I figured out that the best way is to make a table with enumerated rows. I had a working ...
2
votes
0answers
23 views

Vertical table line is missing (tabularx and multirow)

Can anyone tell me, why my table is missing the vertical line on the right? It has something to do with that \multirow, but i can't find it. \documentclass[11pt, twocolumn, a4paper]{article} ...
2
votes
1answer
71 views

Tabularx + multicolumn + 1 fixed column size

I made a table with tabularx which has a multicolumn row first followed by 2 rows, which have 2 columns, the first column should have a fixed size (p{7mm}) the second should be X. If I set the size of ...
2
votes
0answers
75 views

breaking a tabular and aligning tabulars throughout the document

I have two questions. How do you break a tabular so that some of it lies on the previous page while the rest is on the next page. See sample tex file provided below. How do you align the tabular ...
2
votes
1answer
127 views

Citing problem in tabularx with endfloat

Guys I'm hoping you can help me with this one. I'm trying to compile a document with the apa6 class using apacite/natbibapa. I run in to trouble when I want to use '\citet' in the table. '\citep' ...
2
votes
1answer
568 views

tabularx with rotatebox and top-alignment

I would like to write a table with column name in a rotatebox. The problem is that I can't make the row title in 2 lines and rotated and then, the content in itemize is not top-aligned. Can you help ...
2
votes
0answers
307 views

Defining the position of a tabularx environment [closed]

In my report, I use a tabularx environment within a mdframed environment. I don't know why but I have to delete the table environment surrouding my tabularx environment when I want a table in my ...
2
votes
0answers
235 views

Table does not fit [closed]

I created a table that does not fit the page. It's not because it's too big, it's because the table starts from the middle of the page when I export it to PDF. So even though I have half the page ...
2
votes
0answers
25 views

How can I create a wrapper environment for a complicated usage of tabularx? [duplicate]

Possible Duplicate: tabularx inside a \newenvironment I know (at least basically) how to create my own environments using \newenvironment, but I recently encountered a problem trying to ...
2
votes
1answer
293 views

How to create a document wide table style for border [duplicate]

Possible Duplicate: How to separate table content and table style is it possible to create a document wide table setting for how table border are applied for each table? I want to have the ...
1
vote
3answers
71 views

How can I improve the style of this table in latex?

I would like to center all the elements of the table and improve the style of this one. \begin{table}[h] \begin{tabular}{|l|r|l|l|} \hline \multicolumn{1}{|c|}{text} & ...
1
vote
1answer
118 views

How to define potential page breaks in a long table?

I have a huge table that covers multiple pages: \documentclass[10pt]{article} \usepackage{ltablex} \usepackage[top=2.5cm, bottom=2.5cm, left=2.5cm, right=2.5cm]{geometry} \usepackage{bibentry} ...
1
vote
1answer
100 views

Serious table problems - something is wrong the text cell (it just continue?)

TWO MORE QUESTIONS: How do I add analyzes to the left side (so the letter turns into the figure and with a underline?)? And how do I remove "Game"-catogory, if I would like that?? It would be a ...
1
vote
2answers
315 views

Why won't my \otoprule command work in table formatting?

Primer: I'm very new to LaTeX. I am creating a table with the following code. Here is part of the table: \usepackage{tabularx, multirow, booktabs} \begin{table}[tp] \caption{Rain garden site ...
1
vote
2answers
761 views

Alignment of columns of nested tables (tabularx)

I want to nest 2 tabularx tables: the columns of the "inside" table belong to a column of the "outside" table and therefore shall be indented and have a vertical line on their side. I tried to do ...
1
vote
1answer
219 views

array, table, tabular, tabularx, longtable, supertabular, longtabu [closed]

What is the difference between array , table, tabular, tabularx in terms of syntax , typesetting , ease of use, and appearance after compiling. In short, where will you use each of them and what are ...
1
vote
1answer
138 views

tabularx vs ltablex

I have been working with tables spanned over multiple pages as well as I want "x" functionality as well. I have been successfully working with tabularx (along with threeparttable) for now. It seems to ...
1
vote
2answers
154 views

Centering in tabularx columns

I am trying to do centering and text sizing in tabularx environment using the following definitions: \newcolumntype{b}{>{\centering}X} \newcolumntype{s}{>{\hsize=.25\hsize}X} However, when I ...
1
vote
2answers
49 views

Create a table with specified column widths and centre spacing in tabularx

I would like to create a table where I can adjust the overall width of the table, hence the tabularx environment. However I am having difficulty in configuring my tables such that I can control: The ...
1
vote
1answer
42 views

How do I align the table where column going beyond the table

I have table where the column is extending beyond in the table in elsarticle. The MWE is as follows: \documentclass{elsarticle} \usepackage{booktabs} \usepackage{tabularx} ...
1
vote
1answer
74 views

code-like strings with background color, and using tabular environment

I am going to create the following code-like strings with latex, with same background (gray), font, etc. How can I do this? I used listings package but inside \begin{lstlisting}...\end{lstlisting} ...