{tabularx} is a package that defines an environment tabularx, an extension of tabular which has an additional column designator, X, which creates a paragraph-like column whose width automatically expands so that the declared width of the environment is filled.

learn more… | top users | synonyms

1
vote
3answers
40 views

Table not looking good tabularx

I'm trying to make a table in Latex but I'm not expert in it and it's not looking good. Below is what I did but the result is not fitted and not looking good so if anyone could please how I can ...
2
votes
1answer
54 views

Place circuit figures side by side in tabularx environment

My MWE, \documentclass[a4paper,11pt]{book} \usepackage{tabularx} \usepackage{tikz} \begin{document} \begin{enumerate} \newcommand{\OOO}[4]{% \begin{tabularx}{\linewidth}{@{}X@{}l@{}} \textbf{A)} #1 ...
2
votes
1answer
38 views

Long (two-page) table in twocolumn document

I'm trying to include a not too lengthy table of mathematical notation definitions in a paper I'm writing. The paper is in twocolumn mode, the definition table has to span both columns, because ...
2
votes
2answers
82 views

Vertically center tikzpicture in table

I'm tryin to vertically center a tikzpicture in a table. Here's a not-very-minimal example: \documentclass[12pt]{article} \usepackage[utf8]{inputenc} % UFT8 - danske bogstaver og andet godt fra havet ...
1
vote
1answer
19 views

Footnote including \tabularx results vertically wrong alignment of footnote number

Using the \tabularx inside a footnote with the code: \footnote{\label{statistik1}\begin{tabularx}{\textwidth-3em}{lrrrr} \noindent Jahr~& Eheschließungen~& Ehescheidungen~& ...
4
votes
1answer
55 views

Vertically center column separator in tabular

I'd like to vertically center a custom column separator in tabular. I have tried \begin{tabular}{c @{ $\vcenter{\rightarrow}$ } c @{ $\vcenter{\rightarrow}$ } c}...\end{tabular} to no avail. Other ...
1
vote
0answers
20 views

itemize inside tabularx seems to break exam class gradetable

I'm using the exam class. If I use the itemize environment inside a tabularx, LaTeX gives me warnings when I use the gradetable command: LaTeX Warning: Reference `question@1' on page 1 undefined on ...
3
votes
1answer
33 views

Automatic right justify in table - multiple choice question

My code part \newcommand{\iib}[5]{ \begin{center} \begin{tabu} to 0.42\textwidth {@{}|X[l]@{}|X[l]|} \textbf{A)} #1 & \textbf{B)} #2\\ \textbf{C)} #3 & \textbf{D)} #4\\ ...
4
votes
1answer
34 views

Creating table using tabularx and datatool from csv file

I am trying to create a vocabulary list from a csv file containing the vocabulary using tabularx and datatool. This is what I have tried: \documentclass{article} \usepackage{datatool,tabularx} ...
3
votes
2answers
85 views

Table width bug

I'd like my table to look like it does in the top picture. If I delete either LINE-A, or LINE-B, in the code below, it works. If I leave them both there, however, it results in the wrong width of the ...
1
vote
1answer
32 views

tabu and tabularx compatibility - for htlatex, tex4ht and migration between tabu and tabularx

Is it possible to renew the tabularx environment so that it will take the tabularx style parameters? Or the other way around? \begin{tabularx}{\textwidth}{ ... } % ... \end{tabularx} \begin{tabu} to ...
0
votes
1answer
34 views

Vertical lines within cell

I'm trying to replicate the folowing table in LaTeX with booktabs: However, I have trouble making the vertical lines. Here's what I have so far: \begin{tabularx}{\textwidth}{l | c c c c c c c c c ...
3
votes
3answers
79 views

Conflict between areaset and sidewaystable with tabularx

I have a problem with one large table, and I could finally narrow it down by reducing the preamble and commenting out some lines. The Problem: I have a table defined like that (please see the MWE ...
2
votes
1answer
274 views

\midrule ->\noalign Known Error but can't resolve it for my tables [closed]

I have two tables in the below program. First tables generates error of \midrule -> \noalign etc etc, but second table doesn't. I wonder why, I want the output of first table as like second table. ...
3
votes
2answers
85 views

how to align tikzpicture and text in a table?

I need to put my tikzpicture and text in the same height. However, I cannot do it. This is my code: \begin{table} \centering \begin{tabularx}{\textwidth}{ |l|X| } \hline \multicolumn{1}{c|}{ ...
5
votes
3answers
84 views

Vertically align multirow in tabularx environment

I'am trying to align the first multirow column vertically centered. Unfortunately multirow does not determine the actual height. Instead it aligns the multirow it based on the height of three single ...
0
votes
1answer
86 views

I need this tikz and tabular sketch at the right of my presentation, and an itemize at left, but too much length

I need this tikz and tabular sketch at the right of my presentation, and some text at left. Unfortunatly the text is at left but in the down part of my frame, I need it at the center and starting ...
3
votes
1answer
38 views

How can I have automatic line breaks in a multirow inside a tabularx?

I want that the table fits the page, but by default the table is too wide. I already tried tabularx, but now the rows that use a multirow aren't high enough. This is my code right now: ...
4
votes
2answers
83 views

Newline linespacing problems within a table cell

I have problems with the linespace inside a longtable environment when forcing a linebreak. Following code should illustrate the problem. ...
2
votes
1answer
29 views

Extra horizontal lines in tabularx package

When I use the tabularx package to generate a table, this happens: \documentclass [12pt]{book} \usepackage{tabularx} % for stretching tables to page width \usepackage{multirow} % for multiple ...
2
votes
2answers
50 views

Vertical spacing options in tables built under the tabularx package

Goals: Add a space above and below the text line containing the Table 1's column headers. Add a space below the second hline. Add a space above the third hline. The code below contains the ...
1
vote
1answer
91 views

Serious table problems - something is wrong the text cell (it just continue?)

TWO MORE QUESTIONS: How do I add analyzes to the left side (so the letter turns into the figure and with a underline?)? And how do I remove "Game"-catogory, if I would like that?? It would be a ...
2
votes
1answer
75 views

Vertical aligment of dinglist inside table cell with `parskip`

Why is the list text so close to the top line of the cell in some lists? I know it's a problem with the parskip package. I can solve this by adding this strut in every cell before the text ...
3
votes
1answer
79 views

RTL and LTR columns in ONE table?

Is it possible to set some columns in one table as RTL while other are LTR? I want to do something like this: % !TEX encoding = UTF-8 Unicode % !TEX TS-program = xelatex ...
1
vote
1answer
1k views

tabular tabularx automatic linebreak (p/m/b doesn't work as expected)

The following snipped should break at the end of the column \begin{table}[hb] \begin{tabular}{|l|p{.5\textwidth}|} \hline \bfseries Col 1 & \bfseries Col 2\\\hline \hline Line ...
3
votes
3answers
1k views

How to have an itemize inside a tabularx

I am trying to have an itemize inside one of the columns in a tabularx, but when trying to compile this code: \begin{table} ...
1
vote
0answers
41 views

How to automatically vertically center text in Lyx?

I have the following table in Lyx: Here is how it looks in Lyx: I want the text "My words" to be automatically vertically centered. I also want the text for the items that are rotated to be ...
1
vote
1answer
86 views

array, table, tabular, tabularx, longtable, supertabular, longtabu [closed]

What is the difference between array , table, tabular, tabularx in terms of syntax , typesetting , ease of use, and appearance after compiling. In short, where will you use each of them and what are ...
4
votes
1answer
57 views

This code do not compile, this is figure environments inside tabular environment, adding captions and labels

This code do not compile, this is figure environments inside tabular environmet, adding captions and labels. I havent found the reason and an effective way to organize my graphs. This is the code Im ...
3
votes
2answers
51 views

itemize within tabularx does not work when ltablex is loaded

I need this code to be compilable without errors: \documentclass{article} \usepackage{tabularx} \usepackage{amsmath, mathdots, paralist} \usepackage{ltablex} % uncommenting this line will work ...
2
votes
1answer
26 views

How to I use a longtabu inside \newenvironment?

I have the following newenvironment defined using tabularx \newenvironment{factlist}{% \newdimen\unbaseline \unbaseline=\dimexpr-\baselinestretch\baselineskip\relax ...
1
vote
1answer
36 views

How do I align the table where column going beyond the table

I have table where the column is extending beyond in the table in elsarticle. The MWE is as follows: \documentclass{elsarticle} \usepackage{booktabs} \usepackage{tabularx} ...
4
votes
3answers
111 views

Fit a long table on multiple pages

I have this table that it ok for the width but not for the height. How can I split into two different pages? I tried using longtable but I got so many errors. I put an example of a long table taken ...
1
vote
0answers
55 views

Pgfplotstable multicolumn table with dec sep align and Tabularx

I would like to implement a multicolumn table with Pgfplotstable that aligns on one side the number of the columns by dec sep align and secondly aligns the whole table by Tabularx. A version without ...
2
votes
2answers
191 views

Align equations inside tabular

How can I align equations inside tabular? I want to place few lines of equation by side of the picture. But it turns out that I cannot use \& in order to shift equals signs to be one under ...
2
votes
2answers
37 views

Page-breaking of long tables with tabularx and booktabs in scrreprt documentclass

within my thesis I want to have a page break within tables that are very long, and which are created with tabularx and booktabs packages. Surprisingly I could not find any applicable solution for my ...
2
votes
1answer
23 views

Centered columns with fixed width using tabularx

How do I center the last seven columns in the attached text without dropping the fixed table width or the fixed column width? \documentclass[a4paper,12pt,oneside]{article} ...
2
votes
1answer
41 views

Finding the width of \bf text for sizing a paragraph in a table

I have this structure, which builds a table exactly the width of the text, split into two columns. I want the left column to be exactly the width of the longest words in the column, but to still be a ...
3
votes
1answer
40 views

Facing problem with tabularx

I am trying to create a table. However, I am facing problems with rules and formatting. Please have a look at the latex code. \documentclass{article} \usepackage{tabularx,booktabs} ...
2
votes
1answer
114 views

Decimal alignment in tables with tabularx and multicolumn

in my masterthesis I want to create regression tables the numbers in the table are aligned by the decimal point. Here is a MWE to get an impression what I'm talking about: ...
4
votes
2answers
84 views

List in a multicolumn in tabularx

I'm trying to insert a list in a multicolumn of a table defined through tabularx: \documentclass[11pt, a4paper]{standalone} \usepackage{tabularx} \usepackage[left=25mm, right=25mm, top=25mm, ...
1
vote
1answer
58 views

Alignment problems with table using tabularx

I have a problem with a table which I am using for a publication. The code is as follows: \begin{table}[htbp] \centering \captionof{table}{Summary} % \begin{tabularx}{0.5\textwidth}{| c | ...
4
votes
1answer
95 views

Are tabls and tabularx not compatible?

The following MWE does not compile: \documentclass{article} \usepackage{tabularx,tabls} \begin{document} \begin{tabular}{ccc>{arraybackslash}c} 1&2&3&4\\ 1&2&3&4\\ ...
3
votes
1answer
124 views

Problems with \rowcolors and booktabs

I'vegot few tables created with few packages included booktabs where I use the command \rowcolors from the xcolor package. But in the last I notice that the colour is wider that the lines of the same ...
1
vote
1answer
71 views

Problems for coloring tables using booktabs and xcolor

Well, recently I posted a question related here. Thanks to the solution suggested by Harish Kumar I could fix the two tables posted at first. Later I tried to apply the solution to a new third table. ...
2
votes
1answer
65 views

Align numeric values from knitr command \Sexpr{} by decimal in table created with booktabs and tabularx

I am writing my thesis as dynamic document using .Rnw, knitr and R. I ran my statistical analyses in an external R-script, which I sourced into my main .Rnw-file. I also want to create some tables ...
1
vote
1answer
46 views

Table formatting problem with multiple multi-rows

I am trying to complete the formatting of this table. I cannot get the text in the final column to wrap and remain in the cell. The "stuff stuff stuff" text just keeps going off the edge of the ...
3
votes
1answer
135 views

How to draw some lines between figures in LaTex

I want to draw the following figure. How do I do this? Some lines between figures, and Can you give me this lines some color? Some color lines in figure, as following:
0
votes
0answers
40 views

Error in tabularx+listings example with TexLive 2014, which compiles in TexLive 2011 (! Missing { inserted)

Consider this MWE: \documentclass{article} \usepackage{trace} \usepackage{tabularx} \usepackage{booktabs} % \toprule etc; \let\botrule\bottomrule % temp hack \newcommand{\tn}{\tabularnewline} % for ...
4
votes
1answer
59 views

aligned-environment in tabularx - fail to align vertically

I try to have a simple tabularx-table in which the cell content is vertically aligned to the top. While this works as expected for text, two aligned-environments in adjacent cells are vertically ...