{texstudio} is about the LaTeX editor TeXstudio, formerly called TexMakerX. It is a fork of another editor called Texmaker, which has its own tag {texmaker}.

learn more… | top users | synonyms

2
votes
1answer
972 views

TexStudio indents the line instead of inserting a tab when I press Tab

Even though I have no characters selected, TeXstudio 2.8.4 appears to indent the whole line instead of inserting \t at the position my cursor is. This makes it a pain to, for instance, use tabs to ...
2
votes
1answer
94 views

Update TeXstudio portable and keep settings

I updated TeXstudio portable 2.6.6 to 2.8.2 by copying the content of the zip-file into the existing directory. Unfortunately, all settings, macros etc. were gone when starting the new TeXstudio. How ...
2
votes
1answer
443 views

Image file not found

I was developing a document in Latex using TexStudio that was installed in windows7 and now I want to continue in Ubuntu. I installed Latex in Ubuntu and compiled my same project but I got error ! ...
2
votes
1answer
102 views

How to hide the menu at the bottom in TeXstudio?

Is it possible to hide the menu at the bottom in TeXstudio? I can't find a way to do this...
2
votes
1answer
402 views

Resetting a dictionary in TexStudio/MikTeX

I accidentally "always ignore"d a wrong wrong word. How do I undo it and make the old dictionary clean again?
2
votes
1answer
6k views

“Failed to find …x.pdf” error message in Texstudio [closed]

I have been using Miktex for years and now wish to use Texstudio as it looks much easier and faster. To do so, I set up Texstudio on my PC and wrote a very simple code to start off. However, the code ...
2
votes
1answer
341 views

Tex Studio bib file error

When I compile my .bib file in texstudio it says that log file is not However when I compile the latexcode which refers to that .bib file. I can see the reference page, However let say I cite a ...
2
votes
1answer
748 views

Disabling command+scrolling in TeXstudio (OS X)

Is there any way to disable cmd+scroll zooming in TeXStudio for OS X?
2
votes
1answer
2k views

MikTeX and TeXStudio portables both unpacked to usb flash drive. Now What?

I downloaded the portable packages of MikTex and TeXStudio, and unpacked them onto usb flash drive. I do not understand what to do next to configure the TeXstudio to use or work with the MikTeX. I ...
2
votes
3answers
2k views

Problems with environments in TeXStudio

This document \documentclass{article} \usepackage{amsthm} \newtheorem{lemma}{Lemma} \newcommand{\mycommand}{Here is the command} \begin{document} \begin{lemma} Here is the lemma \end{lemma} ...
2
votes
1answer
421 views

How can I open View PDF in the page the cursor is at TexMakerX?

I've been using TexMakerX for about a week. In the document I'm producing, I use pdfLaTeX (F6) to generate the output file, and then I use View PDF (F7). When I use View PDF, it's supposed to open at ...
2
votes
2answers
49 views

tex file compilable on windows but not on OSX

first time Mac user. All my tex files (dissertation, CV, etc) compile fine on windows: texStudio + miktex. But the same files give errors on OSX: texStudio + macTex There are numerous error messages, ...
2
votes
1answer
61 views

Set up TeXstudio to compile either a *.tex or a *.ltx file

This question is probably not very specific for TeXstudio, since it has to do with command execution on a shell. Anyway, I want to set up TeXstudio to compile documents which either have *.tex or ...
2
votes
1answer
132 views

Problem using bibunits

I am trying to use bibunits package. If I compile the TeX file using the following sequence of commands, it works properly. pdflatex document bibtex bu1 pdflatex document pdflatex document However, ...
2
votes
1answer
99 views

TeXstudio's auto completion is completely not working on Fedora 20

I am a novice to the TeX community, and I am running Fedora 20 x64 on my workstation, with kernel version 3.17. I installed TeXlive and TeXstudio via yum, and compilation seems to be working fine for ...
2
votes
1answer
588 views

TexStudio, MiKTeX and Sumatra; Compilation Issue

All is in place: latest version of TexStudio, latest version of MiKTeX (I chose the installation for my 64x windows 8.1), and latest version of SumatraPDF. I installed every package by hand which ...
2
votes
1answer
90 views

Texstudio quick start wizard options managing

My aim was to add some language packages to the quick start wizard. Thus I cliqued the plus symbol of the 'other options' option. Then I was asked to type in this new option: Thinking that it was ...
2
votes
1answer
132 views

Spell check in TeXstudio with beamer

I found that spell check does not applied for frame title in beamer. It spell checks every thing else except those titles. For example: below the word "Literature" is written wrong, however, on ...
2
votes
1answer
233 views

miktex-makepk consistently fails to install fonts

I'm trying to use new typefaces with TeXstudio/MiKTeX, but every single time I try to use one from TeXLive that I install (which is done automatically for any package I include in the preamble that's ...
2
votes
1answer
574 views

“Go to source code” function with texstudio

I am using Texstudio. A useful function of the integrated visualizer is that if I right click at some point of the pdf, I can go to the corresponding code. This works for all of my tex files, except ...
2
votes
1answer
87 views

How to 'Go to Source' for a .Rnw file with knitr on TexStudio

So, I am TeXStudio and R on Windows 8 and have configured with knitr as follows: "C:\Program Files\R\R-3.0.3\bin\Rscript" -e "library(knitr, lib.loc='C:/Users/User/Documents/R/win-library/3.0'); ...
2
votes
1answer
138 views

Finding LaTex output files [duplicate]

I'm using TeXstudio 2.6.2 with MiKTeX-pdfTeX 2.9.4535 on Windows7. I configured TeXstudio to store all output files in a separate directory. It now looks like this: -src |_Report.tex ...
2
votes
1answer
365 views

TeXstudio: How to highlight text in \emph or \textit command, for example?

Is there a way to configure TeXstudio so that emphasized text will display in the editor in italics, for example: \emph{some text} The custom highlighting seems to apply only to environments or ...
2
votes
1answer
1k views

TexStudio ignores some accent keyboard input

I am using TexStudio as an editor and everything works great so far. But since I entered the "typing" phase of my document production, I realized that it has some problem with some french accents ...
2
votes
1answer
423 views

Printing Glossaries in amsart using TexStudio

I am trying to make a glossary in an amsart document using TeXstudio but the glossary will not print. I've downloaded xindy, arara, and perl and have tried to use all of them, but to no avail. Any ...
2
votes
1answer
436 views

Macro in TeXstudio with %<something%> and %(filefilter%) fails

I add the following macro: \begin{figure}[htbp] \centering \includegraphics[width=%<0.9%>\columnwidth]{%(*.png, *.pdf%)} \caption{%<caption%>} \label{fig%<label%>} ...
2
votes
1answer
505 views

Where to store macros for TeXstudio

I'm switching from Winedt to TeXstudio. I have lots of Winedt macros and I would like to write new ones for TeXstudio. Now I read about available macro functions, but I still don't understand where I ...
2
votes
1answer
732 views

Cursor on build error and temp build directory with TexStudio

Cursor position on build error I am using TexStudio with Beamer and TikZ graphic. In general it does a good job to sync TeX and PDF. Anyway, when there is a build error, it tries to move the cursor ...
2
votes
1answer
510 views

In TexMakerX, how can I generate only the PDF, with no log, aux or gz files? [duplicate]

Possible Duplicate: Prevent pdflatex from writing a bunch of files. Every time I generate the PDF in TexMakerX 2.1 for Windows, it also generates the log, aux and gz files, in which I have ...
2
votes
1answer
2k views

Paths in TeXStudio

At least, in teTeX/Linux, one can use environment variables like TEXINPUTS, BIBINPUTS, BSTINPUTS to change default directories. In TeXStudio/Mac, how to access these like variables to specify others ...
2
votes
0answers
57 views

TeXstudio and TikZ

Can someone please run me through the steps to install the TikZ package on TeXstudio? I have been struggling for hours but just can’t seem to get it installed so that I can use it. Thank you in ...
2
votes
0answers
16 views

Combine Bibliography and Reference

The LaTex file was made by someone else, now I'm trying to make some modifications to the file. Q1. The .pdf file generated from .tex only containes the Bibliography part. The reference is in the ...
2
votes
0answers
45 views

Highlight math characters erroneously used outside math environment

I am working on a document in LaTeX that I am copy/pasting from my original Word working file or an OCR-ed PDF file. The Word file has lots of math blocks, which are also copy/pasted, and the PDF has ...
2
votes
0answers
47 views

Concise bibliography entry list in texstudio

I'm working on my dissertation right now. I discovered that the structure tab in texstudio lists all the labels defined in a file. I thought it would be nice if I could see a list of labels from the ...
2
votes
0answers
92 views

TexStudio - internal embedded pdf viewer shows different figure than external pdf viewer of the output pdf

I use TexStudio (2.9.4) on a Mac OSX (10.10.3) with TexLive. The problem here is that when I insert figures, that are saved as pdf files, and compile with PDFLaTex, the output figures deviate from the ...
2
votes
0answers
2k views

Error: “Make sure that you have installed a (La)TeX distribution”

I just installed MiKTeX and TeXstudio, but when I try to compile a document I get the following error: Error: One command expansion invalid. Make sure that you have installed a (La)TeX ...
2
votes
1answer
251 views

TeXStudio and MiKTeX Portable - Could not start command

I have a problem with my TeXStudio. I am using a portable version (2.9.4) together with the latest MiKTeX. Everything used to work just fine and now that I have to finish my work from home instead of ...
2
votes
0answers
28 views

TexStudio auto-completer window not showing correctly

I am having a problem in using the autocompletion feature of TexStudio. When I start the autocompleter, I get a window that is not always being displayed correctly, due to the fact that it is ...
2
votes
0answers
362 views

Error : (Input index file full.idx not found. Usage: makeindex ). I am using texstudio editor

I am using Texstudio editor. I am using Latex to write my thesis. I have had no problem in the past that Latex list the references in my thesis write-up successfully. Suddenly, when I added one more ...
2
votes
0answers
262 views

Inkscape and --shell-escape with TexStudio

My purpose is to show fig1.svg in latex. Here is my code: \documentclass[12pt]{article} \usepackage{amsmath} \usepackage{listings} \lstset{language=Matlab} \lstset{tabsize=2} \usepackage{graphicx} ...
2
votes
1answer
166 views

Warnings In TexStudio when compiling

Firstly, I'm working on a Beamer Presentation; it appears to work correctly but there are some problems.. for instance , it does not apear the title..Blocks etc.. I have some problems in relation ...
2
votes
0answers
149 views

TeXstudio crashes after compilation due to “exception_access_violation”

Please, help me in TeXstudio configuration,, the file is compiled normally then closed without showing the PDF. I think the problem in DVI viewer. Please, check my configuration in attachment. ...
2
votes
0answers
116 views

How do I change the colors of the application interface in TexStudio?

I understand how to change the colors of the editor itself ( as in the link: Anyone willing to share his/her custom dark theme for TeXstudio? ) but now I want to change the application interface from ...
2
votes
0answers
269 views

add elsarticle class to texstudio [closed]

My question is generally about adding elsarticle document class to TeXStudio. In the installation documents it says that I should download .ins and .dtx files and compile them with latex. I don't know ...
2
votes
0answers
32 views

Image was not shown in LaTeX (with TeXstudio GUI), only a black filled box is shown [duplicate]

This is the mini example that I used. \documentclass[a4paper,11pt,reqno,twoside]{amsart} \usepackage{amsmath} \usepackage{amsfonts} \usepackage[demo]{graphicx} \usepackage{float} \begin{document} ...
2
votes
0answers
86 views

Tex studio- Bidirectional

I am using the xepersian package in Texstudio. The logical way of writing maths in Persian in Tex is that one writes in persian and when they press dollar, the font switches automatically to English. ...
2
votes
0answers
2k views

Texstudio and color scheme [closed]

I try to use texstudio for mac. How can i change the color scheme? I found this discussion Anyone willing to share his/her custom dark theme for TeXstudio?, but i do not know how use this color scheme ...
2
votes
0answers
128 views

Slanted TIPA text [closed]

I'm relatively new to LaTex, and am using it to write my linguistics thesis. I started out in TexShop. Although the TIPA faq says you can't use italics with TIPA, this seemed to be working fine. Now ...
2
votes
0answers
180 views

Spellchecking highlighting problem in TexStudio when writing in Arabic

When I write a document in Arabic it behaves differently than in English when it comes to highlighting words misspelled. Consider the screenshot below: Arabic comma right after the target word, ...
2
votes
0answers
306 views

Greek-Letters-Different in AdobeReader and TexStudio, who's right?

I want to use greek letters in my Matlab Figures and then use the figures in Latex. I'm using TexStudio, and the preview inside of TexStudio shows me, for example if I entered a \mu in Matlab ...