{theorems} are environments which are commonly numbered. They are extensively used in math texts. Examples of such environments are theorems, corollaries, lemmas, propositions, remarks and definitions. Popular packages are {amsthm}, {ntheorem}, and {thmtools}. Covers discussion on proofs too.

learn more… | top users | synonyms

0
votes
2answers
52 views

Is there a way to know what is the vertical space that LaTeX is leaving before and after a theorem?

I would like to know if there's some code I can enter in order to find what is the vertical space (in cm or pt) that LaTeX is leaving before and after a theorem. I'm using ...
4
votes
1answer
89 views

No indentation after theorem environment with amsthm

I use the amsthm package and dont want lines which start right after the theorem environment to be indented. I consulted the manual of the package and it said to define a new theorem style. I expected ...
6
votes
1answer
69 views

Theorem and lemma sharing counter with mdframed and cleveref

Problem Essentially I've got the same problem described in Cleveref with counters with same name: I've got theorems, lemmata and corollaries all sharing the same counter, and when referencing them ...
6
votes
1answer
67 views

Want theorem and equation numbering linked under section

Similar questions have been answered but the solutions didn't seem to give what I need. I would like theorems and equations both to proceed as follows within each section. Say we've begun Section ...
1
vote
1answer
44 views

Using enumerate environment within a theorem environment [duplicate]

I am writing a math article, and when I am in a theorem environment and I try to use the enumerate environment, everything is italicized where, out of the theorem environment, it wouldn't be. Is ...
2
votes
1answer
78 views

Case numbering within proof [duplicate]

I am currently using this in the preamble: \theoremstyle{plain}% default \newtheorem{thm}{Theorem}[section] \newtheorem{lem}[thm]{Lemma} \newtheorem{prop}[thm]{Proposition} ...
5
votes
1answer
100 views

How do I remove parentheses from theorem optional argument?

This is a MWE: \documentclass[12pt]{article} \usepackage{amsfonts, amsthm, amsmath, amssymb} \theoremstyle{definition} \newtheorem{Theorem}{Theorem}[section] \newtheorem*{Pythagorean ...
5
votes
1answer
88 views

Increasing depth of document

I am trying to type by using amsart. I want numbering of the definitions, lemma theorem etc should be of the form x.y.z, where x is section, y subsection and z the actual number of the theorem. I ave ...
2
votes
1answer
41 views

Setting Counters for Theorems

I'm using the following code to generate the "lemma" functionality in my document: \newtheorem{lemma}[theorem]{Lemma} However, the first lemma I define appears as Lemma 0.1. I tried using the ...
2
votes
1answer
81 views

Paragraph space

I'm currently writing a math document containing equations, theorems, remarks, etc. I find it difficult to understand how LaTeX manages the vertical space between two paragraphs. E.g. when you don't ...
2
votes
1answer
47 views

qed symbol not correctly aligned when ending a proof with a diagram

I know there is a myriad of questions about the alignment of the tombstone symbol, but I couldn't see any one that addresses this little issue. Say you end your proof with a diagram such as the ...
4
votes
1answer
61 views

Bracket problem with \newtheorem

\documentclass[a4paper, 11pt, notitlepage]{report} \usepackage{amsthm} \theoremstyle{plain} \newtheorem{thm}{Theorem}[section] % reset theorem numbering for each chapter \theoremstyle{definition} ...
8
votes
2answers
143 views

Intelligently Numbering “remarks” only when multiple are made

Problem. I am using the amsthm package, and have remarks after theorems. If there is only one remark between two theorems, the remark should not be numbered. If there are multiple remarks between ...
5
votes
1answer
106 views

Custom theorem-style environment

I use LaTeX to typeset notes and case briefs for law school. So far I have settled for a theorem-style layout for each case using thmtools. Here is a minimal working example: ...
6
votes
2answers
167 views

Numbering theorems in a chapter with no sections

Say I have an index such as: 1. Chapter 1.1 Section 1.2 Section 2. Chapter 3. Chapter and I number my theorems as \newtheorem{theorem}{Theorem}[section] with the last theorem in 1.2 being ...
1
vote
1answer
54 views

How to make an environment such as “theorem” not have italics [duplicate]

I found this: How to change the font style in theorem environment? as well as this: Italic in theorem environment Neither however seem to make sense to me as I have been using the following: ...
11
votes
3answers
124 views

Theorem style similar to equation

I was trying to treat theorems and lemmas as in the book Visual complex analysis which in my opinion has a very nice format for informal reading. I would like to have equations and propositions ...
5
votes
3answers
93 views

Figure number adjusted with theorems

I am trying to adjust the figure numbers linked to the theorem it is displayed in. In case of a theorem contains exactly one figure, the figure number will be theorem number; for multiple figures, the ...
1
vote
1answer
35 views

Wrong numeration using \newtheorem

by using the \newtheorem, the latex does not number the theorems in the right order. used code is \newtheorem{theo.a}{Proposition} \begin{theo.a} this is the proposition. \end{theo.a} changing ...
4
votes
1answer
53 views

How do I reset my theorem count (using mdtheorem)?

% define environments with counters \mdtheorem[style=mpdframe, style=wide ,% style=greyfr ,% style=wideln ] {discuss}{Discuss Topic} ...
3
votes
2answers
126 views

Definitions, theorems, … with description inside a box and the title above the box

I am searching for a definition (or similar) environment with the following features: Numbering Listing Definition title with number above the description Definition text inside a box with black ...
0
votes
1answer
81 views

Customizing list of theorems (LaTeX)

Is it possible to avoid brackets surrounding the name of a theorem in the \listoftheorems from thmtools? And if so, how do I do that?
0
votes
1answer
44 views

Is it possible to attach a label to a theorem so it can be cited later?

I want to know if it's possible to add some sort of label to a theorem such that I can cite it in the future. I know I can do this by writing explicitly the theorem's number every time I need it, but ...
9
votes
1answer
239 views

Change “Theorem” to “Věta” in beamer

I tried to use \uselanguage{Czech}\languagepath{Czech} as suggested in Babel (French) does not translate the theorem environment in Beamer class, but I still get "Theorem" instead of "Věta" for my ...
3
votes
2answers
54 views

How to italicize the heading and optional title of a theorem?

Consider the following code: \documentclass{amsart} \begin{document} \makeatletter \def\th@plain{ \thm@notefont{} \itshape} \makeatother \theoremstyle{definition} ...
1
vote
1answer
192 views

Special theorem command

My aim in the last few questions was to define a very flexible command allowing the definition of theorems of various kinds. The reason for that was to have a single command basically for all kinds of ...
2
votes
1answer
83 views

How to separate definitions from the following text?

Using the definition theorem style from amsthm does not enable the reader to separate between text that belongs to the definition and the text following it. Example: \documentclass{scrbook} ...
6
votes
2answers
121 views

Theorem without counter (any TeX)

I often use theorems on LaTeX and have defined various kinds of them. At times, however, it is best not to define a specific theorem which would otherwise be a once-in-a-long-time usage, as for ...
3
votes
1answer
602 views

Numbering of assumptions

Suppose I would like to have a title of assumption being Assumption 1-$\mathcal F$., Assumption 2-$\mathcal F$. and so on to be further called in the text with symbols different from $\mathcal F$. Let ...
8
votes
1answer
166 views

Space generated by theorem labels (XeTeX)

With the thmtools package, combining \begin{foo}[name=bar,label=x] with the line \newtheorem{foo}{Foo} in the preamble typesets to Foo xxx (bar), where xxx is a number. After the (bar) there is an ...
9
votes
3answers
212 views

Enumerating inside a proposition and inside a proof

I have one problem with enumerating. The symbols for items look differently when the enumerating is done ''inside'' propositions from the enumerating done ''inside'' a proof. The code ...
6
votes
1answer
85 views

How to change QED sign for theorem classes

I'm writing an article which contains some quite long proofs, some of which include claims with proofs of their own. I dealt with that by adding a claim environment using \newtheorem, but there's a ...
1
vote
0answers
52 views

How should one format a proof inside a proof, or 'inner proof'

I've come across this a few times and have yet to find a general consensus on how to format a proof inside of a proof. Should there be a proof environment within the proof environment that is ...
3
votes
2answers
142 views

Theorem Inside Tabular Environment

I'm putting together a Beamer presentation and want a theorem to appear on the left side of the slide and a picture on the right side. I tried to accomplish this with: \begin{frame} ...
0
votes
0answers
77 views

Spacing around thm environments when parskip is changed

I am a beginner with LaTeX and have this probably tyro problem - when I use asmthmpackage environments in combination with \parskip, the (vertical) spacing above and below theorems, definitions, etc ...
7
votes
3answers
183 views

Numbering Theorems/Definitions together, by section and without section symbol

I am fairly new to LaTeX and I am looking for a particular style: I want to number my theorems/propositions/corollaries/definitions together and by section. For example, Definition 1.1, Theorem 1.2, ...
0
votes
4answers
127 views

RTL theorem numbering problem - mdframed and xelatex

I have a problem with wrong numbering order when using mdframed theorem style. As in the MWE, the second theorem number should 2.1.1 (reading from right to left, 1.1 for the section and 2 for the ...
7
votes
1answer
249 views

Incorrect hypothesis counter

The hypotheses counter seems to work incorrectly. All hypotheses are numbered with a 1. What exactly am I doing wrong? I have the following code: \documentclass[12pt]{article} \usepackage{amsthm} ...
5
votes
1answer
73 views

How to enable line breaking in the standard proof environment with amsmath?

I want to redefine the proof so it accepts linebreaks in the name \renewenvironment{proof}[1][\proofname]{\par \pushQED{\qed}% \normalfont \topsep6\p@\@plus6\p@\relax \trivlist ...
7
votes
2answers
136 views

Reference to List Items in Theorem Environment with Label Type “Theorem”

I'm trying to set up references to list items in theorem environments. Using the thmtools and the cref-package I am able to reference theorem environments, such that the theorem type, e.g. theorem, ...
3
votes
2answers
78 views

Global emphsize the theorem name

I would like to global define the theorem environment such that the name of the thereom (like ABC in the following example) is emphasized (either \textit or \textbf), how can I do that? I know I can ...
8
votes
2answers
215 views

How do I get non-italic words in a theorem environment?

I want some words in my theorem environment to not be italic. I know there are simple ways to get the entire theorem in roman, but I'm looking for an italic theorem with specified words in roman. I ...
6
votes
2answers
90 views

Getting the number of a chapter-numbered theorem but without the chapter number

Suppose in Chapter 3 I have Theorem 3.17. I need to get the "17", NOT the "3.17" which would readily be obtained using \label then \ref. How do i do that? Edit: (Probably a more relaxing condition): ...
3
votes
1answer
71 views

How can I number subtheorems hierachically?

I want to create two hierarchy levels of theorems. The goal is to have something like this: Research Question 1: bla bla Research Question 2: bla bla And then in another section of the article, I ...
5
votes
1answer
163 views

controlling theorem numbers using llncs style

Is there a way to control the numbering of different types of theorems, when using the llncs style? With the envcountsame parameter, all theorems/definitions/claims use the same counter and get ...
7
votes
2answers
170 views

Change definition number in beamer

In a beamer presentation, I need to redefine one definition (the definition numbers have to be same). How can I do that? Here is my code. \documentclass{beamer} \setbeamertemplate{theorems}[ams ...
1
vote
2answers
72 views

Making an indented, bold definition/theorem/proof

I would like a result such as this: "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Curabitur aliquam tincidunt mi id elementum. Fusce nec mauris sodales, cursus massa id, feugiat mi: (My ...
7
votes
1answer
131 views

How to copy a lemma to appendix without changing its number?

I have a document with a lemma (using amsthm), like so: \begin{lem} \label{mylemma} % ... \end{lem} The proof of this lemma can be found in the appendix (see section \ref{sec:proof_of_mylemma}). ...
3
votes
2answers
35 views

Blocks at the End of a Solution Structure [duplicate]

so a couple of months ago I created my own package. Everything in it works great, and so far it does everything I need it to do, the way I need it to. But I want to change one thing. When I made the ...
1
vote
1answer
71 views

Using parskip with ntheorem in a book

I am writing a mathematical book and would like to use ntheorem for theorems. Also, I would like to use parskip, because I like these styles of paragraphs more. My problem is that as soon as I include ...