{tikz-qtree} concerns drawing of tree diagrams using the TikZ-qtree package

learn more… | top users | synonyms

1
vote
1answer
83 views

Adjust edge endpoints depending on node label

I would like to draw a tree where the position of edge endpoints relative to the node depends on contents of the node, and may change between the parent edge and the child edges, to point out a ...
3
votes
1answer
95 views

Showing Tikz tree nodes after each other (using bracketing format of \Tree)

I want to display a tikz tree node by node. First A, then A and B and in the end all nodes. Note that I need to do it with the presented format: \Tree [. \node{A};] since trees are automatically ...
5
votes
1answer
182 views

tikz-qtree does not work with node

I am trying to create a tree using the tikz-qtree package. But I keep getting the following error. ! Paragraph ended before \@@@@litlabel was complete. Here is my tex-file: \documentclass[a4paper, ...
4
votes
1answer
340 views

How to change the color of subtrees in tikz-qtree?

Is there an elegant way to color subtrees in tikz-qtree, without going through each of the respective nodes and edges by hand? The following code example shows the ugly way: ...
9
votes
2answers
5k views

How can I produce this tree diagram in LaTeX?

I want to create the tree diagram shown below in TeX code (with the Level 1... level 3 by the side of the tree diagram). Also, I would like to know how to just put bullet points under a box. For ...
2
votes
2answers
119 views

How to elongate the branches attached to one specific node?

I'd like to make longer only two immediate branches attached to the VP node (red ones in the picture) without altering the height of the other branches above and below. Any idea? Thanks! ...
2
votes
1answer
128 views

gb4e item numbers with tikz-qtree trees

I am using gb4e for numbered examples in my dissertation, since most of my examples are interlinear glosses. I am also including syntax trees, using tikz-qtree. One problem, though, is how to keep ...
6
votes
2answers
374 views

How to add text around/below a node using tikz-qtree?

I read many examples in tikz-qtree, but I didn't find one which illustrates how to add text around/below a node using qtree. Anyone knows how to draw the following tree using tikz-qtree?
1
vote
1answer
114 views

How to Create an un-ordered tree in LaTeX?

Is there a way to create a tree in LaTeX without using any "ordering" ? So far, all the examples I came across are structured in this way child{ node [arn_n] {20} child{ ...
7
votes
1answer
685 views

tikz complex mindmap of all disciplines and subdisciplines of knowledge

just started using LaTex yesterday and I am stuck on my very ambitious diagram of all disciplines of knowledge. Problems (some simple, some probably more complicated): change the page size to even ...
9
votes
3answers
462 views

Mendelian Inheritence Chart

I would like to be able to create a simple chart that depicts Mendelian Inheritence, like this one: I'm not too picky about how it looks, as long as it depicts it accurately. Thanks!
2
votes
1answer
179 views

Regular Expression AST with forest or qtree

I would like to represent an abstract syntax tree over a regular expression. Preferable in the form of the following tree: <regexp> | ...
6
votes
1answer
451 views

How to use tkz-graph and tikz-qtree without conflict?

It seems that the tikz-qtree and tkz-graph packages both define (or redefine) the \edge macro... I'd like to use both, but it doesn't seem possible: \documentclass{article} \usepackage{tikz} ...
2
votes
2answers
345 views

Straight and non-straight parent-child connections in tikz-qtree

I want to acheive something of this sort, (without the bounding boxes): Here, the first child has a straight line from the parent, and the following ones are diagonal. What tikzset settings will ...
2
votes
2answers
213 views

Centering vertically inside a block with figures

I want to center vertically different height figures inside the block they reside in. I use the 'tikz-qtree' for the trees, and I want the '5' tree and the right arrow aligned vertically. ...
6
votes
3answers
267 views

reducing white space below tikz-qtree tree

I am including syntactic trees in my dissertation. Below each tree there is a tremendous amount of white space, which will cause the university's editorial office to scream and howl and moan, then ...
3
votes
1answer
365 views

Align leaves of a tree

I have the following tree in which the left-most leave is out of sync: \documentclass{minimal} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \tikzset{level 1+/.style={level ...
4
votes
1answer
145 views

Vertical left branch in qtree

Let's consider a really simple tree like the following : \documentclass[12pt]{beamer} \usepackage{qtree, tikz-qtree, tikz} \begin{document} \begin{frame}{Title} \begin{tikzpicture} \Tree [.XP ...
3
votes
1answer
317 views

Drawing arrows to nodes in trees

I try to draw rhe following three figures. The left is just a sequence of symbols NP V NP AP, the middle one is a unary branching tree and the right one is a binary brancing tree. I want to place a V ...
4
votes
2answers
265 views

Progressive tikz picture in beamer

I have the following slide in my beamer presentation : \documentclass[11pt]{beamer} \usepackage{ulem} \usepackage{tikz-qtree} \usepackage{tikz-qtree-compat} \usetikzlibrary{positioning} ...
3
votes
1answer
64 views

Use of \Tree with a macro

I am using the qtree to produce some trees, for example with this syntax \Tree [.foo bar ]. Now, I have automated some part of the tree and get troubles. When I place [.foo bar ] inside of a macro, ...
5
votes
1answer
228 views

Remember coordinate in nested tikzpicture points to a weird place

I have problems with remembering the coordinates of names defined in nested tikz pictures. Look at the following minimal working example: \documentclass{article} \usepackage{tikz-qtree} ...
8
votes
2answers
2k views

How to draw empty nodes in tikz-qtree?

I'm new to tikz-qtree, and I would like to reproduce this figure in LaTeX: So far, I've managed to cobble this bit of code, but the results are a bit comical, as the empty nodes (those without ...
3
votes
2answers
219 views

Logic tree with tikz-tree — placing nodes on specific places

I am trying to reproduce the following with tikz: And also: Regarding the first image I could start with: \documentclass{article} \usepackage{tikz-qtree} \usepackage{tikz-cd} \tikzstyle{every ...
1
vote
1answer
77 views

Qtree Text Positioning

My document looks like this: \documentclass{beamer} \usepackage[T1]{fontenc} \usepackage[utf8]{inputenc} \usepackage{lmodern} \usepackage{tikz} \usepackage{tikz-qtree,tikz-qtree-compat} ...
2
votes
1answer
206 views

How to improve the spacing of branches in a tree?

I am trying to build a tree but the length of branches is of uneven size. Moreover, I might need to change the labels to strings of shorter/larger length. Do you have some suggestions to improve this ...
0
votes
0answers
31 views

Alignment with tikz-qtree [duplicate]

When using labels with different lengths with tikz-qtree, tree nodes are sometimes not aligned. See the following MWE: \documentclass{scrreprt} \usepackage{tikz-qtree} \begin{document} ...
5
votes
2answers
317 views

Upside down tikz-qtree with concentrated edges

I would like to create an upside down tree with concentrate edges and labels inside the nodes as labels above them. Right now I've come so far. But I still need the edges to concentrate/combine and ...
4
votes
1answer
290 views

tikz-qtree with scope ? (how to draw the Cayley formula)

I want to make a tree for the Cayley formula as this : (But with a vertical layout) I can use the tikz-qtree environments as show in section 1 below I can draw the graph as show in section 2 But ...
1
vote
1answer
126 views

Connecting text in a tikz-qtree with other text by arrow

I want to connect the NP[...], NP[...] text in the left daughter of the following tree with the NP[...], NP[...] in the right daughter. \documentclass{article} \usepackage{xspace} ...
1
vote
1answer
501 views

TikZ - same label for every left/right edge

Is there a way to give every edge on the left the same label up to a specific level (I don't want labels on my leaf nodes). I want to build a Huffman-Code, so it would be nice to have every left edge ...
4
votes
1answer
190 views

Drawing tree in text (like inline math)

Is there a way to draw (with tikz/tikz-qtree) a tree directly in the text, like the inline math command? For a small tree with 2 or 3 nodes? Thanks!
8
votes
2answers
447 views

Tree in a growing bracket

I try to enclose my syntax tree in a growing double bracket using \left \llbracket ... \right \rrbracket. However, the tree always sits in the lower half and leaving the upper half blank, which is ...
4
votes
1answer
746 views

Edge label distance from edge in TikZ-qtree

I'm making a tree using TikZ-qtree, and I need to put labels on my edges. Right now it looks something like this: \begin{tikzpicture} \Tree [.$\alpha$ \edge node[left, ...
4
votes
1answer
841 views

Visualizing broad Tikz tree graph

Modules of software I created produce Tikz QTree diagrams for visualisation. The problem is that some trees grow quite broad... Even when I try to massively shrink them by Tikz settings, I cannot ...
8
votes
2answers
577 views

how to draw a diagram that forks out, then joins in the middle then forks out again?

Update: ref comments: I've slightly corrected the terminology and the title. I am using the term diagram now, instead of tree, and I am just asking on how to draw this diagram in Tikz. Any tool or ...
6
votes
1answer
402 views

How to set optimal level distance in qtree when different nodes have very different amount of text?

I am really a newbie in tikz (about 12 hrs experience) but I think I need to some hint on this. I am using tikz-qtree. Some of the nodes can contain more text than others. I set the text width to a ...
6
votes
1answer
441 views

Customized edge in forest tree

Following the examples in the documentation, it is not too difficult to customize the edge of trees using the tikz-qtree package. The following code illustrates it: \documentclass{standalone} ...
4
votes
3answers
516 views

Adding nodes outside a tree and drawing arrows to them with tikz-qtree and tikz

I try to draw a picture that is supposed to explain the sentence dass er das Lied wird haben singen müssen that he the song will have sing must The idea is to write down the sentence and have the ...
2
votes
1answer
590 views

Drawing a tree with bottom-aligned leaves

I'd like to align all leaves of a tree at the bottom, so what I'd like to achieve should look like: p / \ / /\ c d e What I've tried so far (using tikz-qtree) results in: p / \ ...
7
votes
1answer
437 views

How to align parent nodes to the left/top in a tree

I am drawing trees in LATEX. The qtree library seems to be what I need but the parent is always placed in the center of its children like this: parent / \ child_1 child_2 (I'm a new ...
8
votes
1answer
2k views

Multi-rooted Tree-like Structures and Nodes with Multiple Parents in LaTeX

The qtree package seems to facilitate the drawing of simple trees only. Is there a way to incorporate: Multiple roots & Nodes with multiple parents in a tree in LaTeX?
3
votes
2answers
280 views

How to reflect duplicating a tree horizontally?

I'm following the solution from this post to construct a tree using tikz-qtree. It's working very well as you can see on the image below. The tree is to show the matches of a championship. But ...
3
votes
4answers
1k views

What is a more efficient way to draw this tree?

I have drawn the following tree in TikZ. What I don't like about it is that I have to manually adjust the sibling distance for each level; and the syntax is too cumbersome. It has been suggested ...
11
votes
2answers
362 views

Successively reveal tree bottom up

I am trying build a tree bottom up in a beamer document, i.e. to draw it on screen starting from the most deeply embedded leaves. I've found a lot of Q&As and discussions on how to have trees ...
7
votes
1answer
815 views

Square edges in forest package

I can easily do trees with horizontal (square) edges in tikz-qtree (see MWE). The forest package is however a far superior alternative for my purposes. However, every attempt to do either horizontal ...
6
votes
1answer
541 views

How to create syntactic trees and align them in LaTeX?

I want to create syntactic trees and align them in LaTeX as in the picture below. Can you help me?
2
votes
2answers
394 views

Drawing tree like structure

I have to draw the following figure. What I have now is uggly. Somehow the structure should be more balanced. Is there a way to do this with tikz-qtree? The point is that it is multiple dominance and ...
3
votes
2answers
1k views

[Tikz-]Qtree: force direction of single child to left or right?

I'm trying to draw a tree that has internal nodes with only one child, but which must be oriented. / \ /\ \ /\ Instead of the typical qtree where said children just "hang": ...
1
vote
1answer
2k views

How to draw dotted line between two nodes

\begin{tikzpicture} \tikzset{grow'=right,level distance=60 pt} \Tree [.I \edge node[auto=left]{M};[.II \edge node[auto=left]{L};$3,3$ \edge node[auto=right]{R};[.$x,0$ ]] \edge ...