{tikz-qtree} concerns drawing of tree diagrams using the TikZ-qtree package

learn more… | top users | synonyms

8
votes
1answer
2k views

Multi-rooted Tree-like Structures and Nodes with Multiple Parents in LaTeX

The qtree package seems to facilitate the drawing of simple trees only. Is there a way to incorporate: Multiple roots & Nodes with multiple parents in a tree in LaTeX?
3
votes
2answers
215 views

How to reflect duplicating a tree horizontally?

I'm following the solution from this post to construct a tree using tikz-qtree. It's working very well as you can see on the image below. The tree is to show the matches of a championship. But ...
7
votes
2answers
561 views

How do I skip a level with tikz-qtree?

I'm trying to draw a tree, but I can't get it to skip one level. This is my code. \documentclass[border=1cm]{standalone} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} [every tree ...
3
votes
4answers
778 views

What is a more efficient way to draw this tree?

I have drawn the following tree in TikZ. What I don't like about it is that I have to manually adjust the sibling distance for each level; and the syntax is too cumbersome. It has been suggested ...
11
votes
2answers
284 views

Successively reveal tree bottom up

I am trying build a tree bottom up in a beamer document, i.e. to draw it on screen starting from the most deeply embedded leaves. I've found a lot of Q&As and discussions on how to have trees ...
6
votes
1answer
451 views

How to create syntactic trees and align them in LaTeX?

I want to create syntactic trees and align them in LaTeX as in the picture below. Can you help me?
1
vote
1answer
327 views

TikZ - same label for every left/right edge

Is there a way to give every edge on the left the same label up to a specific level (I don't want labels on my leaf nodes). I want to build a Huffman-Code, so it would be nice to have every left edge ...
2
votes
2answers
367 views

Drawing tree like structure

I have to draw the following figure. What I have now is uggly. Somehow the structure should be more balanced. Is there a way to do this with tikz-qtree? The point is that it is multiple dominance and ...
6
votes
1answer
623 views

Square edges in forest package

I can easily do trees with horizontal (square) edges in tikz-qtree (see MWE). The forest package is however a far superior alternative for my purposes. However, every attempt to do either horizontal ...
1
vote
1answer
1k views

How to draw dotted line between two nodes

\begin{tikzpicture} \tikzset{grow'=right,level distance=60 pt} \Tree [.I \edge node[auto=left]{M};[.II \edge node[auto=left]{L};$3,3$ \edge node[auto=right]{R};[.$x,0$ ]] \edge ...
2
votes
2answers
914 views

[Tikz-]Qtree: force direction of single child to left or right?

I'm trying to draw a tree that has internal nodes with only one child, but which must be oriented. / \ /\ \ /\ Instead of the typical qtree where said children just "hang": ...
5
votes
1answer
194 views

How to save space in qtree

Suppose, I have a qtree: \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree,tikz-qtree-compat} \begin{document} \begin{tikzpicture} \tikzset{ % Define arrow style pil/.style={ ...
4
votes
1answer
355 views

Nodes within leaf text in tikz-qtree?

I'm trying to draw a box around only part of the text in a tikz-qtree tree, but the closest I can do is this: \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{document} ...
7
votes
1answer
491 views

TikZ flowchart child

Is it possible to show block C as a single block rather than having 3 blocks? \documentclass[landscape]{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} ...
4
votes
2answers
518 views

Restoring qtree spacing in tikz-qtree

Is it somehow possible to achieve the same node spacing in tikz-qtree as in the original qtree package? Compare the two: qtree: tikz-qtree: The spacing between nodes in one level should be the ...
6
votes
1answer
3k views

Positioning labels on edges of tikz-qtree

I'm making a tree in a document with tikz-qtree and I managed to make the tree. I've also added labels to the edges, without any problems. However, the labels appear at the top of the edge, i.e. a lot ...
4
votes
1answer
180 views

bug in tikzqtree/tikzscale

Background I was trying to find out if I can use tikzscale to scale the tikz-qtree figure in Text tree using tikz-qtree is too wide, don't know how to break lines and make the tree compact to fit ...
3
votes
1answer
144 views

allowing only horizontal edges (with labels) by using boxes of varying height for nodes

I would like to take advantage of tikz-qtree's spacing algorithm to draw (horizontal) trees of the following form S _ C ---| |--------- | | B |a|--------- | | A _ U |_|---| ...
8
votes
2answers
1k views

Text tree using tikz-qtree is too wide, don't know how to break lines and make the tree compact

I want to make a tree like this one: It doesn't need to be exactly the same, but I want to translate the text, so I need to rebuild it, I'd also want to add a node, but that's easy. My first try: ...
7
votes
1answer
207 views

Is it possible to use {tikz-qtree} along with {qtree}?

I've already drawn too many trees with qtree, but I've discovered that I'll need tree-dvips to draw movements, and this package is incompatible with pdf. I saw that it's quite simple to draw syntactic ...
6
votes
1answer
317 views

Division by 0 when combining tikzpicture and resizebox

To draw a larger tree, I tried to use \documentclass[11pt]{article} \usepackage{tikz-qtree, tikz-qtree-compat} \tikzset{every tree node/.style={align=center, anchor=north}} ...
7
votes
1answer
146 views

** ERROR ** DVI stack exceeded limit. with tikz-qtrees in xelatex

I've got a snippet of tikz-qtree which causes ** ERROR ** DVI stack exceeded limit. when compiling with xelatex, but works fine with pdflatex. But I need xelatex because I've got a lot of unicode ...
8
votes
1answer
435 views

Snow on tikz-qtrees

Is it possible to add some snow on the syntax trees drawn by tikz-qtree? A simple example: \documentclass[11pt]{article} \usepackage{fontspec} \usepackage{savetrees} ...
2
votes
1answer
244 views

Connecting two nodes in tree rectangular

I want to draw a tree like this: The closest I could get to this was the following code: \documentclass{minimal} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \tikzset{level ...
8
votes
1answer
613 views

Edged arrows with tikz-qtree

I've seen this nice little example tree drawn with LaTeX, afaik not tikz. Can I draw similar arrows with tikz-qtree by specifying start and end point only?
2
votes
0answers
275 views

How to convert Newick tree format to TikZ? [closed]

I need to draw a number of large phylogenetic tree diagrams in a document and it appears that tikz-qtree may be the best package for this task. A manual approach does not seem the best solution to ...
4
votes
1answer
222 views

tikz-qtree mangles edge anchors in trees [duplicate]

Possible Duplicate: tikz-qtree spoils tikz trees When I draw a tree using TikZ, for example \documentclass{article} \usepackage{tikz} \begin{document} \tikzset{every ...
4
votes
1answer
258 views

tikz-qtree with scope ? (how to draw the Cayley formula)

I want to make a tree for the Cayley formula as this : (But with a vertical layout) I can use the tikz-qtree environments as show in section 1 below I can draw the graph as show in section 2 But ...
6
votes
1answer
838 views

Shrink tikz trees

How can I reduce the overall size of trees drawn by tikz-qtree? I've got a huge parse tree that doesn't even try to fit on one page. I'd like to either resize the full tree or tweak the placing ...
0
votes
0answers
64 views

Strange line width problem with tikz-qtree [duplicate]

Possible Duplicate: TikZ borders showing through when they shouldn’t (overlapping circles) I have a strange problem with using tikz-qtree where the thickness of the lines are a bit odd. ...
4
votes
1answer
646 views

Dimension too large with tikz-qtree

I want to draw a tree with tikz-qtree, but it bails with Dimension too large. \documentclass[11pt]{article} \usepackage[utf8]{inputenc} \usepackage{pdflscape} \usepackage{tikz} ...
3
votes
1answer
214 views

Shifting parts of a tree to the left, create overlapping sisters in tikz-qtree?

I have a problem with a very large tree. What I woul like to do is moving the first node (1 NP) to the left to give more room for the others. The second node V_e1 dominating er could also go to the ...
8
votes
1answer
804 views

tikz-qtree: curved lines & multiple parent nodes

I am quite new to LaTeX, and I am stuck with a problem Google can't seem to help me with. Basically, I need some hand holding in doing something that is more complicated than my skills can handle at ...
4
votes
1answer
262 views

Can I remove the last leaf line in tikz-qtree?

I've got \Tree [.CP [.TP [.NP [.D the ] [.N woman ] [.CP [.TP [.NP [.N who ] ] [.VP [.V stole ] [.NP [.D my ] [.N necklace ] ] ] ] ] ] [.VP [.V entered ] ] ] ] which gives me a nice tree, but the ...
1
vote
1answer
266 views

Making roofs smaller in tikz-qtree

Is there a way to decrease the size of roofs in tikz-qtree? I want the roofs not to stick out but match the strings below them. \documentclass{scrbook} \usepackage{tikz} \usepackage{tikz-qtree} ...
1
vote
1answer
344 views

Adding space between triangle nodes in separate levels in tikz-qtree

I now switched to tikz-qtree and want to add more space between the two triangle nodes. I cannot figure out a way to do this, since the nodes are on different levels. Is this possible? ...
4
votes
2answers
786 views

complex nodes with tikz-qtree

I am trying to convert my tree-dvips trees into something that is compatible with xelatex. I had a look at the tikz-qtree package, but it seems to be impossible to set complex nodes. In the old qtree ...
5
votes
1answer
1k views

How to add decorations to tikz-qtree branches (for example, create AND-branches and OR-branches)?

Suppose I want to show the expression a IF b OR c b IF d AND e c IF f OR g as a tree, using tikz-qtree. I'd want to do something like this: \documentclass{article} \usepackage{tikz-qtree} ...
6
votes
1answer
612 views

tikz-qtree spoils tikz trees

When I enable the tikz-qtree package, the tree I am drawing with the tikz trees library looks different. Specifically the edges are no longer pointing to proper places on the nodes. In the example ...
3
votes
1answer
507 views

tikz-qtree: edge overlaps with nodes

I'm drawing a tree using the tikz-qtree package. There is a lot of text in the nodes. I'm finding it difficult to get the edges to meet the edge of the nodes. For some nodes with lots of text, the ...
3
votes
1answer
436 views

Creating level labels for (horizontal) tikz trees

I want to create labels and the corresponding lines cutting through the branch levels of a (horizontal) tikz-qtree. Here's the idea. I tried for quite some time and searched the net, but could not ...
2
votes
1answer
247 views

Pushing siblings together in tikz tree

I tried several approaches, but none of them worked... Here is my tree code: \begin{figure}[bh!] \centering \begin{tikzpicture}[ level distance=1cm, growth parent anchor=east, grow=right,scale=0.78, ...
6
votes
1answer
2k views

I'm getting the error: ! Paragraph ended before \@@label was complete

I've scoured this forum and it looks to me like I'm setting up the tree correctly, but I'm still getting this error, I have \usepackage{tikz} \usepackage{tikz-qtree} in the header. Here is the ...
15
votes
1answer
852 views

How to typeset a prefix tree (aka trie)

I am currently trying to typeset a prefix tree (also called a trie). I can make a tree just fine with TiKZ, but I find myself unable to make the prefix tree nodes draw acceptably. I have attached a ...
17
votes
5answers
7k views

drawing tree using tikz, child overlap

I am trying to draw a tree but unfortunately i have some childs overlap each other,I increased the sibling distance , even i have used the option scale but i have the same problem. here is my code : ...
6
votes
1answer
403 views

How to use tkz-graph and tikz-qtree without conflict?

It seems that the tikz-qtree and tkz-graph packages both define (or redefine) the \edge macro... I'd like to use both, but it doesn't seem possible: \documentclass{article} \usepackage{tikz} ...
6
votes
1answer
450 views

How do I draw curve crossing one edge of a tree (using tikz-qtree)?

I am using tikz-qtree, and I'd like to draw a curve separating a set of nodes from the rest of the tree. For example, \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} ...
5
votes
1answer
264 views

tikz-qtree and tikz trees not playing nice with each other

I have the following problem: I have tikz with tikz-qtree installed. Hence, if I draw a tree with q-tree it works perfectly. However, I have to recycle one drawing done without q-tree, so that the ...
9
votes
1answer
768 views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling ...
10
votes
1answer
1k views

macro for empty nodes in tikz-qtree

I'm trying to define a macro for writing empty nodes in a binary tree using tikz-qtree. Referring to the code below, I want the string \missing in my code to be replaced by \edge[draw=none]; {} as-is ...