{tikz-qtree} concerns drawing of tree diagrams using the TikZ-qtree package

learn more… | top users | synonyms

20
votes
2answers
2k views

How to change the level distance in tikz-qtree for one level only?

I am trying to draw a tree for a game theory problem. The problem is that the label p1=0.5 crosses label I. I would like to adjust the level distance of the first level, but the \tikzset{level ...
17
votes
5answers
7k views

drawing tree using tikz, child overlap

I am trying to draw a tree but unfortunately i have some childs overlap each other,I increased the sibling distance , even i have used the option scale but i have the same problem. here is my code : ...
15
votes
1answer
851 views

How to typeset a prefix tree (aka trie)

I am currently trying to typeset a prefix tree (also called a trie). I can make a tree just fine with TiKZ, but I find myself unable to make the prefix tree nodes draw acceptably. I have attached a ...
13
votes
2answers
813 views

TiKZ make lines connecting nodes have the same endpoints

Using the MWE below: \documentclass{standalone} \usepackage{tikz} \usepackage{tikz-qtree} \usepackage{tikz-qtree-compat} \usepackage{ textcomp } \begin{document} \begin{tikzpicture} \Tree [ .TP [ ...
11
votes
4answers
2k views

How to draw syntactical trees with parallel leafs for a natural language?

I need to draw syntactical trees for a natural language. The problem is that I need all the leafs to be parallel. How the other nodes are sorted in relation to the other at the same depth is not ...
11
votes
2answers
284 views

Successively reveal tree bottom up

I am trying build a tree bottom up in a beamer document, i.e. to draw it on screen starting from the most deeply embedded leaves. I've found a lot of Q&As and discussions on how to have trees ...
10
votes
2answers
817 views

How do I center this qtree?

I am trying to draw a tree using the tikz-qtree package, however I am having issues with the nodes of the tree being not centered. \documentclass[10pt]{article} \usepackage{tikz} ...
10
votes
1answer
1k views

macro for empty nodes in tikz-qtree

I'm trying to define a macro for writing empty nodes in a binary tree using tikz-qtree. Referring to the code below, I want the string \missing in my code to be replaced by \edge[draw=none]; {} as-is ...
9
votes
3answers
421 views

Mendelian Inheritence Chart

I would like to be able to create a simple chart that depicts Mendelian Inheritence, like this one: I'm not too picky about how it looks, as long as it depicts it accurately. Thanks!
9
votes
2answers
3k views

How can I produce this tree diagram in LaTeX?

I want to create the tree diagram shown below in TeX code (with the Level 1... level 3 by the side of the tree diagram). Also, I would like to know how to just put bullet points under a box. For ...
9
votes
1answer
767 views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling ...
9
votes
1answer
876 views

\draw alignment when connecting nodes using tikz-qtree, getting line centered

Here is my code and I will post a picture showing what it generates. I will manually draw in red where I would like to draw a line from. I am producing a family tree and I need to connect lines from ...
9
votes
1answer
886 views

Positioning of numbers in gb4e.sty examples

I'm planning to use the following numbered examples in a document (see example below). I would like the number to be at the top of the example, but for the ones with diagrams it ends up in the middle. ...
8
votes
2answers
1k views

Text tree using tikz-qtree is too wide, don't know how to break lines and make the tree compact

I want to make a tree like this one: It doesn't need to be exactly the same, but I want to translate the text, so I need to rebuild it, I'd also want to add a node, but that's easy. My first try: ...
8
votes
2answers
498 views

how to draw a diagram that forks out, then joins in the middle then forks out again?

Update: ref comments: I've slightly corrected the terminology and the title. I am using the term diagram now, instead of tree, and I am just asking on how to draw this diagram in Tikz. Any tool or ...
8
votes
1answer
434 views

Snow on tikz-qtrees

Is it possible to add some snow on the syntax trees drawn by tikz-qtree? A simple example: \documentclass[11pt]{article} \usepackage{fontspec} \usepackage{savetrees} ...
8
votes
1answer
2k views

Multi-rooted Tree-like Structures and Nodes with Multiple Parents in LaTeX

The qtree package seems to facilitate the drawing of simple trees only. Is there a way to incorporate: Multiple roots & Nodes with multiple parents in a tree in LaTeX?
8
votes
1answer
613 views

Edged arrows with tikz-qtree

I've seen this nice little example tree drawn with LaTeX, afaik not tikz. Can I draw similar arrows with tikz-qtree by specifying start and end point only?
8
votes
2answers
2k views

How to draw empty nodes in tikz-qtree?

I'm new to tikz-qtree, and I would like to reproduce this figure in LaTeX: So far, I've managed to cobble this bit of code, but the results are a bit comical, as the empty nodes (those without ...
8
votes
2answers
380 views

Tree in a growing bracket

I try to enclose my syntax tree in a growing double bracket using \left \llbracket ... \right \rrbracket. However, the tree always sits in the lower half and leaving the upper half blank, which is ...
8
votes
2answers
201 views

Need help with making Logic Trees in qtree/tikz-qtree (i.e. aligning, numbering lines)

I would like to make something similar to the logic tree below. I've tried using tikz-qtree, but I can't figure out how to number every line in the tree. I did however find something else doable in ...
8
votes
1answer
804 views

tikz-qtree: curved lines & multiple parent nodes

I am quite new to LaTeX, and I am stuck with a problem Google can't seem to help me with. Basically, I need some hand holding in doing something that is more complicated than my skills can handle at ...
7
votes
2answers
573 views

More efficient way to draw movement arrow to roof in tikz-qtree

When drawing syntactic representations in linguistics, one often uses a triangle to represent a unit whose internal structure is irrelevant. This can be accomplished with the tikz-qtree command ...
7
votes
2answers
559 views

How do I skip a level with tikz-qtree?

I'm trying to draw a tree, but I can't get it to skip one level. This is my code. \documentclass[border=1cm]{standalone} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} [every tree ...
7
votes
1answer
332 views

How to align parent nodes to the left/top in a tree

I am drawing trees in LATEX. The qtree library seems to be what I need but the parent is always placed in the center of its children like this: parent / \ child_1 child_2 (I'm a new ...
7
votes
1answer
491 views

TikZ flowchart child

Is it possible to show block C as a single block rather than having 3 blocks? \documentclass[landscape]{article} \usepackage[utf8]{inputenc} \usepackage[T1]{fontenc} ...
7
votes
1answer
206 views

Is it possible to use {tikz-qtree} along with {qtree}?

I've already drawn too many trees with qtree, but I've discovered that I'll need tree-dvips to draw movements, and this package is incompatible with pdf. I saw that it's quite simple to draw syntactic ...
7
votes
1answer
2k views

Horizontal hierarchy tree in tikz-qtree: bad layout for longer node-names

I'm trying to set a number of hierarchy trees directly in LaTeX and found tikz-qtree quite helpful for this task. Since the descriptions for the nodes and children are rather long words, the layout ...
7
votes
1answer
270 views

Automatic connection of text points in tikz-qtree

I have to draw pictures like the following a lot: I want to use tikz-qtree, since I have a lot of trees and this package simplifies things considerably. Right now I use the following code, since it ...
7
votes
1answer
432 views

tikz complex mindmap of all disciplines and subdisciplines of knowledge

just started using LaTex yesterday and I am stuck on my very ambitious diagram of all disciplines of knowledge. Problems (some simple, some probably more complicated): change the page size to even ...
7
votes
1answer
146 views

** ERROR ** DVI stack exceeded limit. with tikz-qtrees in xelatex

I've got a snippet of tikz-qtree which causes ** ERROR ** DVI stack exceeded limit. when compiling with xelatex, but works fine with pdflatex. But I need xelatex because I've got a lot of unicode ...
6
votes
3answers
352 views

Upside-down syntax trees for linguistics with horizontal lines

I know that syntax analysis can be done in Latex using using TikZ, but the tree-structure that produces isn't really used in my country. Here, we mostly use straight lines instead of hierarchy trees. ...
6
votes
1answer
451 views

How to create syntactic trees and align them in LaTeX?

I want to create syntactic trees and align them in LaTeX as in the picture below. Can you help me?
6
votes
1answer
2k views

I'm getting the error: ! Paragraph ended before \@@label was complete

I've scoured this forum and it looks to me like I'm setting up the tree correctly, but I'm still getting this error, I have \usepackage{tikz} \usepackage{tikz-qtree} in the header. Here is the ...
6
votes
2answers
212 views

How to add text around/below a node using tikz-qtree?

I read many examples in tikz-qtree, but I didn't find one which illustrates how to add text around/below a node using qtree. Anyone knows how to draw the following tree using tikz-qtree?
6
votes
1answer
621 views

Square edges in forest package

I can easily do trees with horizontal (square) edges in tikz-qtree (see MWE). The forest package is however a far superior alternative for my purposes. However, every attempt to do either horizontal ...
6
votes
1answer
137 views

aligning several trees to the baseline

I want to have the following trees aligned to the baseline. There is a problem which is probably due to the "g" in some of the trees. How do I get these trees aligned? I tried \strut, but this somehow ...
6
votes
1answer
316 views

Division by 0 when combining tikzpicture and resizebox

To draw a larger tree, I tried to use \documentclass[11pt]{article} \usepackage{tikz-qtree, tikz-qtree-compat} \tikzset{every tree node/.style={align=center, anchor=north}} ...
6
votes
1answer
838 views

Shrink tikz trees

How can I reduce the overall size of trees drawn by tikz-qtree? I've got a huge parse tree that doesn't even try to fit on one page. I'd like to either resize the full tree or tweak the placing ...
6
votes
1answer
450 views

How do I draw curve crossing one edge of a tree (using tikz-qtree)?

I am using tikz-qtree, and I'd like to draw a curve separating a set of nodes from the rest of the tree. For example, \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} ...
6
votes
3answers
226 views

reducing white space below tikz-qtree tree

I am including syntactic trees in my dissertation. Below each tree there is a tremendous amount of white space, which will cause the university's editorial office to scream and howl and moan, then ...
6
votes
1answer
330 views

How to set optimal level distance in qtree when different nodes have very different amount of text?

I am really a newbie in tikz (about 12 hrs experience) but I think I need to some hint on this. I am using tikz-qtree. Some of the nodes can contain more text than others. I set the text width to a ...
6
votes
1answer
403 views

How to use tkz-graph and tikz-qtree without conflict?

It seems that the tikz-qtree and tkz-graph packages both define (or redefine) the \edge macro... I'd like to use both, but it doesn't seem possible: \documentclass{article} \usepackage{tikz} ...
6
votes
1answer
345 views

Customized edge in forest tree

Following the examples in the documentation, it is not too difficult to customize the edge of trees using the tikz-qtree package. The following code illustrates it: \documentclass{standalone} ...
6
votes
1answer
3k views

Positioning labels on edges of tikz-qtree

I'm making a tree in a document with tikz-qtree and I managed to make the tree. I've also added labels to the edges, without any problems. However, the labels appear at the top of the edge, i.e. a lot ...
6
votes
1answer
611 views

tikz-qtree spoils tikz trees

When I enable the tikz-qtree package, the tree I am drawing with the tikz trees library looks different. Specifically the edges are no longer pointing to proper places on the nodes. In the example ...
6
votes
1answer
1k views

How to specify left and right node of a tikz-qtree

I'm drawing a binary tree using tikz-qtree. In my binary tree the order of children is important, so I need distinguish which edge is the left one and the right one. In my sample code I can't ...
5
votes
1answer
1k views

How to add decorations to tikz-qtree branches (for example, create AND-branches and OR-branches)?

Suppose I want to show the expression a IF b OR c b IF d AND e c IF f OR g as a tree, using tikz-qtree. I'd want to do something like this: \documentclass{article} \usepackage{tikz-qtree} ...
5
votes
1answer
331 views

How can I align captions with each level of a tree drawn with tikz-qtree?

I have drawn a binary tree using the TikZ-qtree package. 1) I now would like to align captions on the right of tree with each of its level---and I would like the placement to be automatic (ideally I ...
5
votes
1answer
62 views

tikz-qtree does not work with node

I am trying to create a tree using the tikz-qtree package. But I keep getting the following error. ! Paragraph ended before \@@@@litlabel was complete. Here is my tex-file: \documentclass[a4paper, ...