7
votes
2answers
255 views

Trees with only leaves in TikZ

Following Roel's answer to How to write a tree with no (visible) root with TikZ? I attempted to visualise my Huffman-Code for "Tennessee", but it didn't turn out as I expected: My MWE: ...
4
votes
2answers
87 views

representing a null child in a binary tree using `ground` symbol

I'm using ground symbol to represent a null child in a binary tree. But the ground symbol has arrows in it. How do I remove them? \documentclass{llncs} \usepackage{llncsdoc} \usepackage{tikz} ...
4
votes
3answers
157 views

Draw a binary tree using tikz

I'm trying to draw a binary tree using tikz package. If I use only circle, I get a tree. But I want to represent a subtree using a triangle. Now the tree gets uneven. I want to attach the arrows to ...
5
votes
1answer
147 views

TikZ: Re-arranging the hierarchical diagram

I was quite impressed by the solution given by "cfr" for the question posted here. Can you suggest a method to change the two main children (labelled Projection matrix Theory and Reconstruction ...
2
votes
1answer
37 views

Forest package: Left-align all nodes on every level

The tree below looks exactly the way it should. But is a more elegant way to left align all nodes on every level without explicitly specifying tier on every node? This is error-prone and really ...
3
votes
1answer
110 views

Horizontal Probability Tree with Level Labels

I'm trying to create a Horizontal Probability Tree with Level Labels using tikz. (Not tikz-qtree). Right now, I have a horizontal tree. The labels are NOT aligned to the top of the diagram. I would ...
0
votes
1answer
34 views

Trees with nodes consisting of multiple lines [duplicate]

I want to draw a tree but I want the nodes to be able to have multiple lines and specific width. I have searched about trees but all of them consist of a single line in each node. From what I have ...
7
votes
2answers
244 views

How do I draw merged red black tree into 2,3,4 tree in tikz?

I'm using tikz in study material and I want to show analogy between RB trees and B-trees (2,3,4 tree). I want my output looks something like this example from Wikipedia. For RB tree I'm using almost ...
3
votes
0answers
41 views

How to draw a tree with fixed node distances? [duplicate]

I am trying to build on the filesystem tree example. I have a similar requirement to display a hierarchical tree, but I'm struggling to get the tree layout right. In the example, the link between a ...
1
vote
1answer
87 views

How to Create an un-ordered tree in LaTeX?

Is there a way to create a tree in LaTeX without using any "ordering" ? So far, all the examples I came across are structured in this way child{ node [arn_n] {20} child{ ...
8
votes
2answers
1k views

How to draw empty nodes in tikz-qtree?

I'm new to tikz-qtree, and I would like to reproduce this figure in LaTeX: So far, I've managed to cobble this bit of code, but the results are a bit comical, as the empty nodes (those without ...
7
votes
2answers
227 views

Special tree in tikz

I'm trying to draw a tree like this: The root has three children and every of this two... The nodes in the first two tiers has additional informations.. I searched for examples like that, but could ...
3
votes
2answers
1k views

tikz tree fork down edge labels

\documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[level distance=1.5cm, level 1/.style={sibling distance=3.5cm}, level 2/.style={sibling ...
4
votes
1answer
151 views

Drawing tree in text (like inline math)

Is there a way to draw (with tikz/tikz-qtree) a tree directly in the text, like the inline math command? For a small tree with 2 or 3 nodes? Thanks!
1
vote
1answer
266 views

Depth-first traversal of a binary tree

How can I achieve the drawing of a depth-first traversal of a binary tree like in this picture ?
7
votes
1answer
212 views

Creating radial trees in TikZ

I am fairly new TikZ user and I am looking for a way to generate a radial tree similar this: or this: So far, I have two methods of doing this: 1) Program it manually - This involves quite a ...
1
vote
1answer
131 views

How to write a tree with no (visible) root with TikZ?

I’m trying to write a tree structure in TikZ. The trees in question are labelled on the leaf only; there is no label on inner nodes. Because I don’t use node on inner nodes, the tree structure joins. ...
3
votes
1answer
90 views

tikz draw tree with extra column

01, 001 and 0001 are not actually "childs". How do I add K=1,2,3 and K=4 to the left hand column? And I tried really hard to adjust the distance. But this is the best I can do. Thanks. ...
7
votes
1answer
281 views

Draw randomized tree in TikZ

I am trying to draw a randomized tree using TikZ, that is, I'm looking for a macro \randtree{NN}{x} that attaches a randomized tree of maximum depth x to a node named NN. The nodes need not be visible ...
5
votes
2answers
227 views

How to make TikZ draw right child before left

I'm trying to make a tree with two different colors of edges, black and gray. This is my code: \documentclass{article} \usepackage{tikz} \usetikzlibrary{positioning,automata} ...
10
votes
1answer
348 views

Drawing PQ-trees

I need to draw PQ-trees in LaTeX which look like these: I tried trees in tikz but I had two problems: partially shade rectangles use vertical pointers from children to the parent, if the parent ...
7
votes
1answer
298 views

Trees in latex : Depth of 4 nodes

I am following the current tutorial (MWE) : link However, I am facing difficulties to perform a tree of 4 nodes. Items are superposed, and even if I add a child [missing] {} it doesn't solve the ...
2
votes
1answer
173 views

How can I use fork style edges with explicitely positioned TikZ tree nodes?

As part of a graphical export facility, I try to render a tree in TikZ were all the node positions are exactly given and were the edges are fork-style. Doing that without the trees package demands ...
3
votes
1answer
342 views

Vertical path to node in TikZ trees

How can I set the path between two specific nodes to "vertical" rather than "direct"? Currently my tree looks like this: \begin{tikzpicture}[level distance=1.5cm, every ...
11
votes
1answer
548 views

Using beamer overlays with forest generated trees

I am using the forest package from Sašo Živanović in order to create a wide tree on a beamer slide. Previously, I was using qtree. But due to the easier way of arranging nodes automatically with ...
2
votes
2answers
338 views

Drawing tree like structure

I have to draw the following figure. What I have now is uggly. Somehow the structure should be more balanced. Is there a way to do this with tikz-qtree? The point is that it is multiple dominance and ...
2
votes
2answers
749 views

[Tikz-]Qtree: force direction of single child to left or right?

I'm trying to draw a tree that has internal nodes with only one child, but which must be oriented. / \ /\ \ /\ Instead of the typical qtree where said children just "hang": ...
12
votes
1answer
432 views

draw a many edge from a node- Tree - tikz

i want to draw the tree in the following picture : i have write : \documentclass{article} \usepackage{tikz} \usepackage{color} \definecolor{red}{rgb}{1,0,0} \begin{document} ...
0
votes
0answers
242 views

Example template for a hierarchy diagram [duplicate]

I wanted to draw a tree diagram so that i can put citations beside the node texts. Is there an example in code?
6
votes
3answers
1k views

drawing a syntax tree in tikz

I would like to draw a syntax tree, which resembles the below syntax tree. I know that I can use tikz to draw syntax trees, but I can't seem to figure out how to draw a straight line down to a node, ...
2
votes
0answers
235 views

How to convert Newick tree format to TikZ? [closed]

I need to draw a number of large phylogenetic tree diagrams in a document and it appears that tikz-qtree may be the best package for this task. A manual approach does not seem the best solution to ...
10
votes
1answer
777 views

Tikz tree and position of single leaf in binary tree

I am constructing a binary tree which looks as follows: \begin{tikzpicture} \node {root} child { node {left} } child { node {right} child { node {rightmost} } ...
0
votes
0answers
64 views

Strange line width problem with tikz-qtree [duplicate]

Possible Duplicate: TikZ borders showing through when they shouldn’t (overlapping circles) I have a strange problem with using tikz-qtree where the thickness of the lines are a bit odd. ...
4
votes
2answers
735 views

complex nodes with tikz-qtree

I am trying to convert my tree-dvips trees into something that is compatible with xelatex. I had a look at the tikz-qtree package, but it seems to be impossible to set complex nodes. In the old qtree ...
5
votes
1answer
622 views

Incomplete arrows and missing arrow heads in TikZ

I have the following plot which looks good, but there are two issues: Not all arrows have arrow-heads. I have no idea why this is. Some edges are not long enough. For example, the left edge of the ...
8
votes
3answers
304 views

Problem using macros to define tree substructures

Relatively simple problem: I want to use macros to define substructures of a tree. In the following example for illustration, I want to define some children (left and right) to be used several times ...
3
votes
0answers
124 views

Draw Tree using tikz [duplicate]

Possible Duplicate: Drawing a tree where many nodes have the same child in TikZ I'm trying the draw a tree using the tikz package, \begin{center} \begin{tikzpicture} ...
9
votes
1answer
716 views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling ...
8
votes
1answer
994 views

How to draw a joining line between two picture tikz-pgf

I'am having draw two tree using the tikz-pgf package \begin{frame} \begin{columns}[c] \begin{column}{2cm} \begin{tikzpicture}[scale=0.5] \tikzstyle{level 1}=[sibling distance=10mm] ...
2
votes
1answer
411 views

Writing a line from two sibling nodes in a TikZ tree

Recently I am struggling on TikZ and it is really difficult to find options and solutions considering it is such a huge and comprehensive library. What I actually would like to do is drawing, in a ...
1
vote
1answer
834 views

Problems with tikz tree growth on secondary levels in trees

I have the following code: \begin{tikzpicture}[grow=right, sloped] \tikzstyle{level 1}=[level distance=1.3cm, sibling distance=1cm] \tikzstyle{level 2}=[level distance=1.2cm, sibling distance=1cm] ...
4
votes
2answers
2k views

How to draw a horizontal tree with branches on the right and left?

I need to draw trees but they should extend (from the root) on both sides. TikZ seems a good solution but do not how to manage it.
4
votes
1answer
1k views

TikZ-tree: edge-alignment in horizontal org-chart

I'm working on some sort of org-chart/hierarchy-tree and ran into issues with the edge-alignment. As a guideline I used the family-tree-TeXample. See the TeX.sx-dicussion here. However, the text in ...
5
votes
1answer
496 views

How to align a vertical tree to the upper-left corner?

How do I align vertical trees to to the top? This is my current tree:       I want to get this tree:                  ^ That's a part of ...
7
votes
1answer
2k views

LaTeX probability tree

Please could you tell me if the Probability tree posted on 2006-12-14 by Kjell Magne Fauske can be done with three branches instead of just two.
2
votes
2answers
508 views

Tree in a graph's node

I am trying to figure out how I can draw a tree in a graph's node with tikz. Meaning, the node is not supposed to have a value or name but a tree inside of the circle around it. I tried the following ...
2
votes
1answer
319 views

How does one use \node[inner node]{}?

I'm trying to reproduce a TikZ tree from a Till Tantau presentation (see pg.33 of this .pdf) My code is as follows: \documentclass{article} \usepackage[latin1]{inputenc} ...
19
votes
3answers
5k views

Drawing a directory listing a la the tree command in TikZ

Good day everyone - Is there a fast and efficient way to draw directory tree structures (aka depth-indented listings) like the unix's tree command, that is, is there a way to draw the following using ...
4
votes
1answer
3k views

Probability Tree-diagram with TikZ

Thanks for helping me out. How can I make the following tree-diagrams? http://www.vias.org/tmdatanaleng/cc_prob_cond_independ.html
3
votes
3answers
1k views

Why is this tree overlapping and missing edges?

\node [circle, draw] at (6, 0) {63} child{node [circle, draw] (left node) {26} child{node [rectangle,draw] (left node) {A:12}} child{node [circle, draw] (right node) {14} ...