{tikz-trees} is for questions addressing issues related to trees in {tikz-pgf}.

learn more… | top users | synonyms

6
votes
2answers
221 views

Tikz Forest label positioning

I'm constructing a tree diagram using the forest package, and I want to label the edges. Usually, Tikz is quite good at avoiding a collision between the label and the edge, but if the branches of my ...
6
votes
3answers
339 views

Prevent TikZ tree text overlapping with later lines

I'm trying to create a family tree with TikZ growing right. I have the tree working, but the text at each node is too long, it overlaps with later lines (e.g. My Family Tree, Paternal GMother and ...
6
votes
3answers
917 views

What can I do to improve the spacing in a Tikz tree?

I finally managed to make a genealogy tree with Tikz, but there are some spaces that I can't figure out how to increase between nodes: ...
6
votes
2answers
156 views

move the green box to the top of the right grey box

The following is the graph I modified from the forest style, but I encounter an problem when I try to move the green box to the top of the right grey box, I know the main problem is the tree style, ...
6
votes
2answers
172 views

Decision Tree with Labels on Both Sides of Line

I am trying to generate a decision tree similar to this scanned example: Notice that some branches have text on the top as well as the bottom. I have not figured out how to do this. I can get text ...
6
votes
3answers
258 views

Horizontal - Vertical connectors in a tree (in place of slanted lines)

Here is the MWE: \documentclass[landscape]{article} \usepackage{tikz} \usetikzlibrary{shapes,arrows} \begin{document} \tikzset{ treenode/.style = {align=center, inner sep=2pt, rounded corners = ...
6
votes
2answers
302 views

How to draw an arc between edges connecting child nodes?

I have the following code to generate a couple of trees. How do I draw arcs between the edges (marked in red in the figure)? \usetikzlibrary{intersections} \begin{tikzpicture} \node {Goto(P$_A$)} ...
6
votes
2answers
1k views

Tikz mindmaps sharing children

Is it possible to have two mindmaps that share children? This is what I would like to have: Concept 1 is blue, and has some children. Concept 2 is red, and has some children. Concept 1 and two ...
6
votes
1answer
661 views

How do I create a Tikz mindmap that has two connected roots?

I am creating a mindmap that has multiple root concepts instead of just one. How can I create such a mindmap using Tikz? These are the mindmaps: \begin{tikzpicture}[small mindmap,concept ...
6
votes
1answer
845 views

How to check tikz version using \listfiles Command

I tried to the following code to get the version information about TikZ using \listfiles command. However, there is an error says File amsmath.sty not Found, may someone help me? ...
6
votes
1answer
685 views

tikz-qtree spoils tikz trees

When I enable the tikz-qtree package, the tree I am drawing with the tikz trees library looks different. Specifically the edges are no longer pointing to proper places on the nodes. In the example ...
6
votes
1answer
751 views

Incomplete arrows and missing arrow heads in TikZ

I have the following plot which looks good, but there are two issues: Not all arrows have arrow-heads. I have no idea why this is. Some edges are not long enough. For example, the left edge of the ...
6
votes
1answer
1k views

Custom sibling angle for child nodes

As I explored the TikZ manual and available examples; the position of child nodes are defined within the parent node. This means that all child nodes spread on the same radius from the parent with ...
6
votes
1answer
2k views

How to change the shape of TikZ's mindmap children?

Consider the original example of tikz's mindmap. The standard shape of both parent and children is circle. The official document states the difference of TikZ's mindmap from standard mindmaps by using ...
6
votes
1answer
126 views

How to put level 2 concept mindmap nodes alongside a rectangle

What I have done: I have looked in to the pgf manual. I have searched on this site for mindmap and did not find a solution. I have a mindmap with many nodes at level 2 and eight nodes at level 1. ...
6
votes
1answer
135 views

Constructing a tree in LaTeX

I am having real trouble creating a tree. So far I have \documentclass{article} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture}[every tree node, level distance=1.25cm,sibling ...
6
votes
1answer
224 views

Hyperlinks from a TikZ tree

I am trying to combine this answer on how to create hyperlinks with a tree hierarchy taken from the filesystem tree example. While the basic hyperlinking works, I get an error message as soon as I ...
6
votes
1answer
335 views

Forest: different growing directions for branches on the same level

Problem In TikZ, one can control the growing direction of a branch (and its sub-branches) by using the grow=<direction> key. In forest, however, the grow key only controls the growing direction ...
6
votes
1answer
1k views

Label on a tree edge to a node that has children

I have a problem when trying to label an edge that goes to a node that itself has children. Here is what I would like to do: \begin{tikzpicture} \node {A} child { node {B} edge from parent ...
6
votes
1answer
161 views

Relating tree nodes in forest to content in a table

I want to draw the following figure: I now converted my trees to forest and the following code is what I have: \documentclass{article} \usepackage{forest} \forestset{ sn edges/.style={for ...
6
votes
1answer
182 views

How to draw the physical tree with balls under both the stress of strings and gravity?

I want to draw the physical model of graph that has a ball for each vertex and a piece of string for each edge. In this model, if you lift a ball high enough, the other balls are pulled up along with ...
6
votes
1answer
1k views

Step-by-step revealing of tikz-tree using opacity trick and overlays in beamer

I am using the very elegant method from user Daniel described here to try and reveal my tikz-tree gradually. The brief idea is that the tree is always fully drawn to avoid "jumpy" nodes and make their ...
6
votes
1answer
163 views

Is it possible to change the edges for some tree level using forest package?

Is it possible to change this MWE which is using forest package to produce a tree, similar to that produced by the next MWE that is not using forest? The very last level of child nodes would have to ...
5
votes
2answers
319 views

Produce nice TIKZ picture (Tree)

so far i have the following code which gives me a ugly TIKZ picture (twe level tree). Is there a comfortable way to get a nice spacing for second level nodes? Thank you very much in advance! ...
5
votes
2answers
337 views

how to draw the complex work flow using tikz 2.0

I wish to draw a complex work flow using tikz 2.0 because I tried to update the tikz to 2.1, there are many problems. The work work flow is described as follows: I have tried to draw it by locating ...
5
votes
1answer
2k views

Decision trees in Tikz

So I can do this: But I want to do this: That is, its easy to add text alongside the connectors (either slanting alongside them or straight), but I would like part of the connector to be flat ...
5
votes
2answers
323 views

Unexpected result for child nodes: why they seem to be typeset in bold?

I was trying to draw something similar to: without the border around nodes and where arrows should have a line (with a given width to be visible) connecting the tail and the tip. My code is: ...
5
votes
2answers
1k views

Looking for an example of an OLAP cube with dimensions drawn in TikZ

I am looking for an example of a TikZ picture of an OLAP cube with dimension hierarchy. More-less something like this cube: I know how to draw a cube based on What is the easiest way to draw 3D ...
5
votes
3answers
1k views

Probability tree using TikZ for Bernoulli experiments?

Consider the tree below. Is there an easy way to label every left edge q, every right edge p, every left node f and every right node r, without doing it manually for every level? Second question: Is ...
5
votes
2answers
221 views

How to colour branch/edge on a tree using tikz?

I have created a tree diagram using tikz on Latex. However I'm not sure how to go about highlighting/adding colour to a branch. For instance, looking at the tree that I've illustrated, I want to ...
5
votes
2answers
101 views

Obtain a TikZ tree from a Lua table/string

Let's consider I have a database where with appropriate passages I obtain the a string that describes a layered tree. Consider the following listing: % !TEX encoding = UTF-8 % !TEX program = ...
5
votes
2answers
178 views

Tikz, nodes in a tree become not fitted.

I want to draw 4 trees and I want to have some nodes in each of them fitted like in the first picture. But what is coming out is in the second picture. What is wrong with the code? Thanks in advance!! ...
5
votes
2answers
255 views

How to converge various nodes with rectangular shapes and arrow in TikZ?

I'm very new to TikZ. I would like to join some nodes as shown in the attached image I've got some idea from this thread tree rectangular. However, I could not manage to implement this properly ...
5
votes
2answers
397 views

Drawing a LISP expression as a tree

Somewhat inspired by How to automatically draw tree diagram of prime factorization with LaTeX? and mostly motivated by laziness, I'd like to be able to draw a tree defined by LISP syntax for a class ...
5
votes
3answers
604 views

Making mixed trees with and without text-containing nodes

I’m using TikZ to draw linguistic syntax trees where some nodes have textual labels and some nodes don’t. I’d like the branch from a labelless node to continue at the same angle into the right hand ...
5
votes
2answers
122 views

Extending a tree

I am trying to extend the following tree, so that it is as in the picture: \documentclass[12pt,a4paper]{article} \usepackage{tikz-qtree} \usepackage{tikz-qtree-compat} ...
5
votes
2answers
228 views

Draw a tree with tikz

I have some problems I am not able to fix with this tree in tikz: 1. how can I avoid the empty space near the root? 2. how can I write a text on branches? I used "edge from parent" but does not work ...
5
votes
1answer
2k views

Drawing Graph of Markov Chain with “Patches” using Tikz

First time using Tikz. Haven't found any documentation on drawing graphs like these, so I have been reading other examples and trying to modify their code to fit my example. I am trying to reproduce ...
5
votes
3answers
4k views

Draw a binary tree using tikz

I'm trying to draw a binary tree using tikz package. If I use only circle, I get a tree. But I want to represent a subtree using a triangle. Now the tree gets uneven. I want to attach the arrows to ...
5
votes
1answer
1k views

TikZ trees grow right typesets things “upside down”

This is a pretty minor gripe with what is a great library. \documentclass[border=3em]{standalone} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[grow=right] \node {a} ...
5
votes
2answers
112 views

How to break lines in a node of a tikz tree

This is the code I have: \begin{tikzpicture} \tikzset{edge from parent/.style= {draw, edge from parent path={(\tikzparentnode.south) -- +(0,-5pt) ...
5
votes
1answer
204 views

pgfmathparse inside tikz child doesn't work

Consider the following MWE: \documentclass{article} \usepackage{pgf, tikz} \begin{document} \begin{tikzpicture} \node {} child foreach \i in {1,2,3} {node {$\i$}}; \end{tikzpicture} \end{document} ...
5
votes
2answers
304 views

Dotted line between nodes in two graphs

I need to create some match graphs for my masters thesis report, something like the following: I have found something called PG 3.0 that can make the graphs, but i do not know how to make the dotted ...
5
votes
1answer
513 views

TikZ nodepart children

I know how to create a multipart node in TikZ using \nodepart, and I know how I can draw lines from these nodeparts to hook them up to other nodes: \documentclass{standalone} \usepackage{tikz} ...
5
votes
1answer
165 views

Crossed hierarchy

I appreciate it if you let me know the most elegant way to draw a crossed hierarchy such as the followings: X /\ Y Z /\/\ p q t q has two parents Y and Z.
5
votes
1answer
849 views

how to draw arrow that looks like the symbol “\leadsto” in latex?

please refer to the answer of how to draw a process flow figure? Now I what to change all arrows look like \leadsto in latex, you are refer to the picture I can not find it in the manual, ...
5
votes
1answer
540 views

How to align a vertical tree to the upper-left corner?

How do I align vertical trees to to the top? This is my current tree:       I want to get this tree:                  ^ That's a part of ...
5
votes
1answer
145 views

Connecting arbitrary text in `forest`

I already asked this question with regard to tikz-qtree (Connecting text in a tikz-qtree with other text by arrow), but maybe there is a better way to do this in forest. I have the following tree: ...
5
votes
1answer
283 views

TikZ: Re-arranging the hierarchical diagram

I was quite impressed by the solution given by "cfr" for the question posted here. Can you suggest a method to change the two main children (labelled Projection matrix Theory and Reconstruction ...
5
votes
1answer
263 views

Still some of the flows missing in the flowchart

I have posted this question few days back but still I can't complete the algortihm. This is the uncompleted work done so far \documentclass[a4paper,10pt]{article} \usepackage[utf8]{inputenc} ...