{tikz-trees} is for questions addressing issues related to trees in {tikz-pgf}.

learn more… | top users | synonyms

3
votes
2answers
751 views

Is this a TikZ bug?

I have this TikZ code: \documentclass{minimal} \usepackage{tikz} \usetikzlibrary{positioning} \begin{document} \begin{tikzpicture} [ level 1/.style={sibling distance = 2cm, level distance = ...
3
votes
2answers
130 views

How to define edges in tikz

When I use absolute position for the edges, I get almost intersecting arrows. Here is my code. Kindly help. \begin{tikzpicture} [ node distance = 2cm and 0.8cm, >=stealth, ...
3
votes
1answer
750 views

how could we create this tree diagram?

How could we create the following tree diagram in a seperate page which has horizontal landscape?
3
votes
2answers
223 views

How to make Tikz Node Content fit?

I'm trying to make a decision tree with Tikz, but the text in my nodes overlap. Does anyone know how to fix that? Thanks so much! \begin{tikzpicture} \node {{Lorem ipsum dolor sit amet, ...
3
votes
2answers
518 views

How to Create Directed Graphs in LaTeX

How can one create a tree structure in LaTeX that begins with a single number and extends with an arbitrary number of arrows that connect numbers below with numbers above such that the head faces ...
3
votes
1answer
459 views

Horizontal Probability Tree with Level Labels

I'm trying to create a Horizontal Probability Tree with Level Labels using tikz. (Not tikz-qtree). Right now, I have a horizontal tree. The labels are NOT aligned to the top of the diagram. I would ...
3
votes
2answers
2k views

tikz tree fork down edge labels

\documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[level distance=1.5cm, level 1/.style={sibling distance=3.5cm}, level 2/.style={sibling ...
3
votes
1answer
41 views

How to use bracket symbol in node name in forest?

\documentclass{article} \usepackage{forest} \begin{document} \begin{forest} [Z [$K[2]$] ] \end{forest} \end{document} How can I use brackets in a node name? Not necessarily inside math. The above ...
3
votes
2answers
72 views

boundary around nodes corresponding to euler walk

How can one automatically draw the red line corresponding to euler walk in tikz. I tried using beizer curve, and a lot of other methods, but had to finally set coordinates manually to get somewhat ...
3
votes
1answer
152 views

TikZ: Skinny ellipse around two horizontally and vertically offset nodes in a tree

As a follow up question to draw an ellipse into a Tree picture -tikz package, how would one go about making a skinnier ellipse that encircles two horizontally and vertically offset nodes in a tree? ...
3
votes
1answer
114 views

tikz draw tree with extra column

01, 001 and 0001 are not actually "childs". How do I add K=1,2,3 and K=4 to the left hand column? And I tried really hard to adjust the distance. But this is the best I can do. Thanks. ...
3
votes
1answer
750 views

Bringing the nodes of a TikZ decision tree closer to each other vertically

I am currently working on creating a decision tree for a journal publication and need to save space. As of right now, my decision tree looks like Although this is nice, I would like to "compress" ...
3
votes
1answer
466 views

Decision Tree with Tikz - Not to fill and grow down instead of growing west

I am trying to build this decision tree I was take out fill option at \tikzstyle{choice} = [circle, minimum width=8pt, fill, inner sep=0pt] and also make the tree grow down \tikzstyle{level ...
3
votes
1answer
183 views

how to draw special line in a picture

Here is my current code for the picture: \documentclass[a4paper,12pt]{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \resizebox{.5\textwidth}{!}{ \tikzset{level 1/.style={level ...
3
votes
1answer
758 views

Example of matrix node in trees in tikzpicture

I'm trying to recreate this image using tikz matrices in a tree. I can create the first node and can hook up to children, but I can't get the syntax for including more matrices as child nodes of ...
3
votes
2answers
3k views

Fit flowchart into one page

I am trying to create a flowchart using TikZ and i have few difficulties... My flowchart doesn't fit into one A4 page The text Yes \ No is on the line and not on the side of it. The size of decision ...
3
votes
3answers
68 views

Change the distance of text lines in tikz nodes with Beamer

I have a tikz tree that doesn't fit on the slide. The theme and the linespread is given, so I only want to change the line distances of the text in the tikz nodes. But nothing worked for me :( ...
3
votes
1answer
234 views

Close a cycle in a TikZ graph with a loop

Consider the following simple flow diagram. I like using the graph drawing library in TikZ for its simplicity and semantics: \documentclass{standalone} \usepackage{tikz} ...
3
votes
2answers
76 views

TikZ tree (not aligned text at a given level of the tree because use exponent)

I have a tree (see example) for which the text at level 1 is not aligned since one of the text uses some math expression with an exponent (i.e., $\mathtt{int}^2$). Any idea how to get all the texts ...
3
votes
1answer
213 views

How to draw AVL rectangle represention in TikZ?

I am trying to represent AVL's in an old way that I was taught and found more intuitive to display in comparison to most common books nowadays. The raw images with the features I am interested in are ...
3
votes
1answer
267 views

tikz trees - children attached to wrong node

Consider \usetikzlibrary{calc,decorations.pathreplacing,shapes.symbols} \begin{tikzpicture} \node [shape=cloud,aspect=2,draw] {\strut} [level distance=6em,sibling distance=1.5em,grow=45] child ...
3
votes
2answers
1k views

Tikz, Tree without overlaps

I'm trying to get a nice tree without the overlaps, can anyone help me to improve my code? \documentclass{standalone} \usepackage{amssymb} \usepackage{amsmath} \usepackage[utf8]{inputenc} ...
3
votes
1answer
384 views

Big table in beamer

I have a big table that does not fit in the slides with Beamer, i write this : \documentclass[10pt]{beamer} \usetheme{CambridgeUS} % theme \usepackage{tikz} \begin{document} \begin{frame} ...
3
votes
2answers
1k views

TeX memory size error when using TikZ foreach children in trees

Nearly Identical: How to expand TeX's “main memory size”? (pgfplots memory overload) I'm getting the same error as the other question, but the answer there is not handling my issue. I believe the ...
3
votes
1answer
63 views

Incompatibility of calc and some styles for forest

I got a cool solution for integrating a tabular-like object into a forest figure (Relating tree nodes in forest to content in a table) but this is incompatible with another cool solution for fixing ...
3
votes
1answer
61 views

Showing Tikz tree nodes after each other (using bracketing format of \Tree)

I want to display a tikz tree node by node. First A, then A and B and in the end all nodes. Note that I need to do it with the presented format: \Tree [. \node{A};] since trees are automatically ...
3
votes
2answers
293 views

Problems with \newgeometry by using landscape and minipage

I try to rotate a tikz-tree and a table which are in a minipage environment by using \landscape because the tree besides the table is to wide. Now, the tree and the table are not centered. The last ...
3
votes
1answer
402 views

flow chart page size issue

I have been doing this since from last month. I want to draw this flow chart using \documentclass[a4paper,11pt]{report} but if I use above configuration (which I want to use) the flow chart does ...
3
votes
1answer
271 views

Drawing arrows to nodes in trees

I try to draw rhe following three figures. The left is just a sequence of symbols NP V NP AP, the middle one is a unary branching tree and the right one is a binary brancing tree. I want to place a V ...
3
votes
1answer
73 views

How to adust the location of the inner component in the Outer component constructed by “fit”?

I use "fit" to make two small rectangles inside a bigger rectangle. And then add some words at the top of the bigger one, which causes a large blank space at the bottom of the bigger rectangle as ...
3
votes
1answer
396 views

How specify tree levels nodes sizes?

I am working on a TikZ tree following the tutorial called A Lecture Map for Johannes from the TikZ manual. I am having trouble to get nodes from deeper level smaller than ones of previous level. I am ...
3
votes
1answer
410 views

How to connect two childs? [duplicate]

Possible Duplicate: How two connect any arbitrary nodes of tree in tikz Hello everyone I'm new to latex. And just started using the tikz package to draw. I have here a code below, which is ...
3
votes
1answer
55 views

How to obtain the same-sized-boxes?

I want all the rectangle have the same size. What should I do? \documentclass{article} \usepackage{tikz} \usetikzlibrary{positioning} \usepackage{tikz-qtree} \tikzset{edge from parent/.style= {draw, ...
3
votes
1answer
48 views

tikz Controlling the position of prongs of underbrackets in an equation

I would like to make a two (or more) pronged underbracket (or overbracket). In particular, I would like to control the: number of prongs. position of the prongs by specifying to which characters in ...
3
votes
2answers
71 views

Getting non-sense edges in my tree, or, how to get labels on edges

I have the following code. If I remove the edge commands, everything is fine. I suppose the problem is that my nodes have the same contents, but I can't avoid this obviously. Bad code: ...
3
votes
1answer
464 views

Inserting floating text near decision tree arrows

How do I insert Yes and No beside the solid arrows? I tried putting node [near end, right] {Yes} after each node and child declaration but this just messes up the flow of the decision tree. Code ...
3
votes
1answer
381 views

Tikz example doesn't compile

I tested this example (from tikz package) example's link and my IDE TexMaker with MiKTeX returns an error ! Package pgfkeys Error: I do not know the key '/tikz/edge from parent fork dow I aalo ...
3
votes
1answer
94 views

Labels above tikz tree forks

I have an upward-growing tree showing the flow of a proof, as follows: \documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \resizebox{\textwidth}{!}{% ...
3
votes
1answer
67 views

Alter location of edge in graph in tikz

So I have the following: \begin{tikzpicture}[shorten >=1pt,node distance=1.75cm,thick] \node (A) {$A$}; \node (B) [below left of=A] {$B$}; \node (C) [below right of=A] ...
3
votes
0answers
32 views

Connecting two nodes from different forest trees [duplicate]

I want to draw the following figure without pstricks: What I have is the following code: \documentclass{minimal} \usepackage{forest} \usepackage[external]{adjustbox} ...
3
votes
0answers
154 views

Tikz graphdrawing library with tree layout throws error

When I compile the following snippet \documentclass[tikz,border=0pt]{standalone} \usetikzlibrary{graphdrawing} \usetikzlibrary{graphs} \usetikzlibrary{shapes.misc} \usegdlibrary{trees} ...
3
votes
0answers
44 views

How to draw a tree with fixed node distances? [duplicate]

I am trying to build on the filesystem tree example. I have a similar requirement to display a hierarchical tree, but I'm struggling to get the tree layout right. In the example, the link between a ...
3
votes
0answers
130 views

Draw Tree using tikz [duplicate]

Possible Duplicate: Drawing a tree where many nodes have the same child in TikZ I'm trying the draw a tree using the tikz package, \begin{center} \begin{tikzpicture} ...
2
votes
2answers
1k views

Create a syntax tree with LaTeX

Is is possible to create this tree with LaTeX ? \documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture} \node {E} child { node {F} } ...
2
votes
3answers
172 views

Strange graph in tikz

I want to make a strange graph in tikz. This graph has some nodes inside the nodes... like this figure: I tried this: \newcommand{\twonodes}[2]{% \begin{tikzpicture}[node distance=0.7cm] ...
2
votes
2answers
105 views

How to elongate the branches attached to one specific node?

I'd like to make longer only two immediate branches attached to the VP node (red ones in the picture) without altering the height of the other branches above and below. Any idea? Thanks! ...
2
votes
1answer
250 views

Connecting two nodes in tree rectangular

I want to draw a tree like this: The closest I could get to this was the following code: \documentclass{minimal} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \tikzset{level ...
2
votes
1answer
374 views

Draw a vertical flow chart [closed]

I would like to draw a Diagram like the one in the attached picture.
2
votes
2answers
305 views

Style inheritance in TikZ trees

As I read the rule for style inheritance in a tree (pgfmanual 18.4, page 215), the naked [rect] below should mean that the node labeled "empty" be rectangular. But it's not. What am I doing wrong? ...
2
votes
1answer
32 views

How can I change < to [ ?? I want the picture with 1 2 3 4

\documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \tikzset{grow'=right,level distance=32pt} \tikzset{execute at begin node=\strut} ...