{titles} is about typesetting document titles, usually with the help of \maketitle or the titlepage environment. A popular package is {titling}.

learn more… | top users | synonyms (2)

8
votes
2answers
15k views

Custom title page in report or book class?

I have a long academic report to write and I am thinking of using the book class or the report class? However in both these classes the title page has the title in the centre. I want to make my own ...
1
vote
1answer
31 views

Some commands don't come out in the pdf - TeXmaker

I'm just starting to learn how to use the program and watching tutorials online, at the moment I'm using TexMaker. Everything seems to be going just fine however when I try to use the commands \title, ...
1
vote
1answer
61 views

apa6 documentclass makes ugly title-page

I have a problem using apa6 class and doc type: since paper has many authors/affiliations etc., title-page is set quite low, leaving only 'Abstract' title and the body of abstract on the next page. ...
3
votes
1answer
85 views

Title Page with LaTeX

Output I obtained the following output with code given below: \documentclass[oneside,english,a4paper, 12pt]{book} \usepackage{a4wide, fullpage, color, fancyhdr, lastpage, changepage, multirow, ...
4
votes
1answer
33 views

How to change the color of separator dots in ModernCV?

I want to change the color of the separator dots to the theme color of the CV. When I use normal color theme like \moderncvtheme[orange]{casual} I am getting the dot in grey color like the one in pic ...
3
votes
1answer
26 views

Two-sided amsbook with custom title page

I am using amsbook to typeset a two-sided document and want to add a custom title page. The problem is that it inserts the TOC right after the title page, without leaving an empty page inbetween. The ...
2
votes
0answers
15 views

Introductory pages in amsbook

Here is the preamble to my document, plus a little more. \documentclass{amsbook} \usepackage{amsmath} \usepackage{amsfonts}% \usepackage{amssymb} \usepackage{graphicx} \usepackage{mathtools} ...
4
votes
2answers
53 views

Two 'maketitle's in article

I'm writing a report with two parts using the article class. \documentclass[a4paper,11pt]{article} \usepackage[T1]{fontenc} \usepackage[english]{babel} \usepackage{amsmath,amsfonts,amsthm} ...
2
votes
0answers
58 views

Beamer - Title page is perturbed when adding notes

I'm working on a Beamer presentation in which I want my notes to be along with a small preview of the current slide only (bigger than the default). I worked on the following MWE, which seems to work ...
2
votes
1answer
65 views

Unwanted empty page in the middle of a chapter

I am having an empty page in the middle of a chapter of my document. The only information that appears is the page number. The pages before and after are filled with text and figures. I have checked ...
1
vote
0answers
17 views

Href in \subtitle

How can i put href at the page subtitle? I have a: \usepackage[% verbose, colorlinks=true, naturalnames=true, linkcolor=blue, ]{hyperref} \begin{document} % % Title page % \title{Title} ...
15
votes
2answers
17k views

Putting abstract at the titlepage

My LaTeX file: \maketitle \begin{abstract} For over a century, fingerprints have been an undisputed personal identifier. Recent court rulings have sparked interest in verifying unique... ...
2
votes
1answer
36 views

How to insert a personalised centred horizontal line separation in a thesis title page

I am trying to insert a horizontal line to separate the title of my thesis and the subtitle that simply describes that it is a PhD Tesis. However I have played around with \hrule and \hfill commands ...
4
votes
1answer
49 views

Create Title Page with Hepthesis produces error

I'm trying to create a title page with hepthesis but run into problems. Could you hint me in the direction where I skrewed up? MWE1: \documentclass[oneside,a4paper,]{hepthesis} \begin{document} ...
8
votes
1answer
188 views

Add a second website in moderncv banking

I wanted to include 2 websites in my resume which I am making using moderncv but it seems it allows only one website. How to show 2 websites in the header (showing the website icon for both)? I am ...
4
votes
1answer
63 views

Beamer Title Inside Node — Line Break

I am creating my own beamer theme, and the way I have conceived the title page needs the title to be inside a tikzpicture node, in this form: \node [anchor=center] (title) at ($(box)+(0,.25)$) {% ...
2
votes
1answer
34 views

Glossary-like list of subsection headings

I have a document, that has same subsection headings on multiple pages. I would like to create something like a glossary, that prints the list of headings and references to the pages where the ...
5
votes
2answers
78 views

Changing the \title in amsart

I am new to amsart. I want to give myself a default running header. So I try to redefine \title in the obvious way as follows. \documentclass{amsart} \let\AmStitle\title ...
1
vote
0answers
43 views

Reducing the space between the \title and the first line of the the abstract in IEEEtran

I am trying to reduce the space between the title and the abstract (the paper have no authors). IEEETran style is being used. I tried the \vspace command but it didn't work, any ideas, ...
3
votes
1answer
73 views

Show a shorter title in the bottom part of the presentation

How can I show a shorter title so it doesn't get cut, this is an example of my problem. In the bottom part the title is cut before finishing so i want to show something shorter just [Lorem Ipsum and ...
1
vote
0answers
35 views

How to generate multiple authors with multiple institutions in ACM style

The default ACM style looks like this However, I need the style as follows. The cls of the template can be found here.
4
votes
1answer
1k views

How do I position title, frametitle, navigation bar and contents in arbitrary absolute positions?

I am trying to adapt the structure of a slide in beamer in order to match a background I would like to use. However, if I just insert the components of the frame (title, frametitle, contents), things ...
1
vote
1answer
74 views

Writing first part of my thesis

\documentclass[a4paper,12pt]{report} \usepackage{amssymb} \usepackage{amsmath} \usepackage{latexsym} \usepackage{amsthm} \usepackage{eucal} \usepackage{eufrak} \usepackage{graphicx} ...
4
votes
1answer
66 views

How can I make a LaTeX poster with all affiliations on the same line, using Beamer?

I'm using the beamer class and all the examples I can find have the author affiliations on different lines. My research project requires us to have them all on 1 line, with superscripts indicating the ...
2
votes
1answer
54 views

Document class: APA6 - problem using the abstract

First of all, I am a bloody beginner in LaTeX, searching for some help. I am using the document class APA6.cls and I want to separate the content of title page from the abstract page. Using \newpage ...
2
votes
1answer
48 views

How to float a figure in LaTeX so it won't change text alignment?

I'm trying to create a title page in LaTeX. Here is my code: \begin{titlepage} \begin{center} \vspace*{1cm} \large \includegraphics[width=0.10\textwidth]{FIGURE1.jpg} ...
3
votes
1answer
67 views

customizing chapter title format in classicthesis

I'm using classicthesis and I'd like to change the formatting of the chapter title a little bit (f.e. size and color). I think I've found the according part in the classicthesis-style % ...
0
votes
0answers
38 views

Writing long email address in a footnote [duplicate]

I am writing a twocolumn document. But the problem is the author's email is split in to two lines with a hyphen. How can I remove the hyphen from the email? MWE \documentclass[twocolumn]{article} ...
1
vote
1answer
73 views

How to improve table of contents?

I want to improve my table of contents so that I have larger writing (but with different sizes for section, subsection etc..), better spacing between lines and to add 'page' above the numbers.., maybe ...
4
votes
1answer
2k views

Picture on title page

I'm trying to add a picture to my title page but the image appears on its own page. Can anyone help with this? \documentclass[a4paper,12pt]{scrartcl} \title{Report} \author{blah} \date{\today} ...
1
vote
3answers
4k views

Beamer: Line spacing in title

I have a long title for my beamer presentation and ue the \titlepage{} command. The title is automatically split over 4 lines. As I am using a tall font (arev), these lines are squashed together. I ...
3
votes
1answer
30 views

How to suppress newpage when using titling

I am using titling so I can reuse \maketitle many times in a document. My document will be a sequence of around 100 abstracts for a conference, each with their own title and author. I want to have ...
3
votes
1answer
93 views

Change header layout in moderncv

I am creating a CV with the moderncv classic style. My header looks so far like this: : I would like to achieve that the name and title are not aligned at the lower, but at the upper end of the ...
1
vote
1answer
34 views

how to use incgraph to obtain a landscape cover?

I tried this \documentclass[12pt,a4paper,x11names,landscape]{article} \usepackage[top=2.5cm, left=3.5cm, bottom=2.5cm, right=2.5cm]{geometry} \usepackage{incgraph,mwe} \usepackage[utf8]{inputenc} ...
0
votes
0answers
16 views

TitlePage header and footer comtaining logo

I'm writing a report, and i'm doing the title page. Well i would like to have a header containg three logo ,and to have text under a logo. This is the result i want to get for the header : This is ...
1
vote
1answer
82 views

tikzposter 4 logos title (2 at each side)

I am trying to place 4 logos two at each side of the title for a poster in tikzposter. Is there any way to overlap the title with the figures? Maybe placing the \titlegraphic in a different layer ...
5
votes
3answers
148 views

Adding an email to LaTeX file

Is it possible to add an email just below the authors in this code? \documentclass[11pt,oneside,a4paper]{article} \usepackage{hyperref} \title{Hello} \author{User1 \and User2} \begin{document} ...
20
votes
2answers
15k views

Different margins for title page

My document class is article with a4paper. The margins that I want for the body are: top: 1 inch bottom: 1 inch right: 0.5 inch left: 1.5 inch The title page should have a 1 inch margin on all four ...
2
votes
2answers
144 views

Blank page appears before title page

I am writing my thesis paper in LaTeX. I wrote the title page like below. But whenever I compile the .tex file one extra blank page is added before the title page. I can't figure out why is it ...
6
votes
1answer
91 views

“Torn page” decoration for Beamer

I am Basilio, I've been using stackexchange for a while and it's of course really useful. Here's my first question: in the thread Alternatives to the horizontal line in fancyhdr the user Gonzalo ...
1
vote
1answer
60 views

How to additional personal information in moderncv banking classic modified

The result should be as shown here: \name{John}{Doe} \title{Curriculum Vit\ae{}} \birthdate{07 June 2014} <============ adding this line. \addresss{}{} but my TeX code at the bottom doesn't ...
3
votes
2answers
78 views

How remove title page's set date

how to delete the surrounded date without deleting the footer's date? I've tried \date{}, but this would remove the footer's date too.
2
votes
2answers
52 views

How to extract author names

I am writing a project report with one of my friend. The problem is, somewhere (e.g., titlepage) I need to write all our details, but somewhere I need only names. Here's what I was trying to do: ...
4
votes
3answers
133 views

Can someone please tell me how to make a title center?

This is my title. \title{"IT" gas station Finder \newline Windows Mobile Application \newline \newline PROJECT REPORT\newline \newline}% This is the code \documentclass[a4paper, 11pt, ...
4
votes
1answer
69 views

How could I remove the blank page before the title page?

I'm using latexian to edit my manuscript. However, the first page is blank. The following is my latex code. How could I deal with this problem? \documentclass{article} \usepackage{authblk} ...
0
votes
0answers
49 views

Add collaborators' name in beamer title slide

How to add collaborators' name (perhaps their respective institute also) in the title slide for beamer? I don't want them to appear at the bottom of every slide.
2
votes
1answer
33 views

Odd lines that aren't entered after the titlepage

I'm working on my report and after putting a lowercase in the titlepage name, somehow weird numbers end up underneath the titlepage on an empty page. The numbers are: _033303333.27 04453.37 13713.48. ...
7
votes
3answers
88 views

How to align text in title with \fcolorbox

I have defined a new command to make some titles for a newsletter. I'm using the article class for the document. The command is defined with the following code: \definecolor{myblue}{rgb}{0.16, 0.32, ...
3
votes
1answer
71 views

Prevent title page from being considered as page “1”

I am write a big document use \frontmatter and \mainmatter to get different page numbering for different parts. All is fine except that the title page appears to be page 1; that is, there are two page ...
1
vote
0answers
45 views

Create a document cover using style class

I'm wanting to create a latex class called projeto.cls that should create this report cover image below, which has the following headers and footer for all reports generated. The fields defined entrie ...