{titles} is about typesetting document titles, usually with the help of \maketitle or the titlepage environment. A popular package is {titling}.
8
votes
3answers
12k views
How to write a footnnote attached to the author in a LaTeX paper?
I want to attach a footnote to each author of a paper and write that their research was supported by different grants. How do I do that? Simply \footnote after each author does not work!
0
votes
0answers
188 views
Title page report with TikZ [closed]
I want to make the front page shown in the attached PDF.
Someone! help me?
3
votes
1answer
34 views
Force Poem Title and graphics on the same page
I've been using \needspace{4\baselineskip} to keep Poem Titles with a graphic produced by lilypond-book (music typesetting engine) together. In a 184p. document with 79 different Poem Titles followed ...
2
votes
1answer
52 views
How to add multi-authors with different affiliations in Beamer using LyX?
I want to have two authors with different affiliations showing on the cover page in beamer. Can anyone help me how I can do this in LyX? Specifically, I want to have the below structure:
Title
...
0
votes
0answers
46 views
Put a break after authors
I want to put a page break after the authors as there is a small space between the authors block and the abstract.
3
votes
2answers
1k views
LyX: add multiple authors
In Lyx, I have to insert 3 authors in an article. For each one of them I will have to specify their email address and the university they belong to. Two belong to the same one:
author_a, ...
2
votes
1answer
36 views
Substituting lowerbacktitle in one-sided document
I'm using LyX and the thesis template that comes with it. When I changed my document from two-sided to one-sided a page in the output disappeared. I found out that this was the \lowertitleback that ...
41
votes
3answers
49k views
\subtitle doesn't work in article document class
I'm relatively new to TeX but until now I used mostly the beamer class. There I did this:
\documentclass{beamer}
\title{title}
\subtitle{subtitle}
\author{name}
\date{\today}
\begin{document}
...
4
votes
1answer
178 views
How to insert logo in exam document class?
I would like to insert a logo for the exam questionnaire on the upper right where the title is placed but i dont know how.. i would like to appear it this way.
3
votes
1answer
68 views
Changing the default title/author/institution/frametitle font in Beamer
I sadly haven't been able to answer this questions using Google. In beamer, I'd like to make the default font for the entire title page, as well as frame titles, to be the default font from the old ...
1
vote
1answer
111 views
Shared author footnotes in REVTeX
REVTeX automatically combines \email and \thanks macros into a single footnote, and uses the same footnote if multiple authors share the exact same set of macros.
Is there any way to force the \email ...
12
votes
2answers
3k views
How to add background only to title frame and an other only to the last frame?
I just want to add a background only in the beamer title page. I can add it in the .tex as follows:
\setbeamertemplate{background canvas}{
...
5
votes
1answer
35 views
Footnote on document author with footmisc
I'm using the following:
\documentclass[11pt]{article}
\usepackage[bottom,flushmargin,hang,multiple]{footmisc}
\title{Title}
\author{Joe Blow\footnote{Address}}
\begin{document}
\maketitle
...
3
votes
0answers
44 views
Footers are disappearing when adding text “behind” title page
I have a "book" with a cover and several chapters and appendices. I need to add some text and images (publishers) "behind" the cover. So I tried the \newpage command after the title page. It worked, ...
4
votes
1answer
173 views
Insert Picture on Titlepage
I have made a titlepage with a wide (104pt) vertical line and i want to place a logo on top of that line. I tried to do it with icluding a picture with tikzpicture, but it places the image at the ...
7
votes
1answer
2k views
How can I get \maketitle to create a separate title page with the article class?
I am working on a maths assignment and new to using LaTeX. I have written the assignment up but I would like the title page to be its own page. Currently my title page is a few lines generated by ...
2
votes
1answer
62 views
How to vertically align title in LaTex
I'm finishing my master's thesis and would like to move the title vertically more down towards center of the page...I googled, but couldn't get it to work =/
Here is a portion of my code from the ...
1
vote
1answer
61 views
Textbox on frontpage
in my thesis I would like to include a "textbox" in the lower left corner of the front page. It should contain the names of my supervisors. But I'm not able to put a box there, I suppose it has to do ...
6
votes
1answer
214 views
How to customize title page in beamer so that it looks like
How can I modify title page so that it looks like it is in this video. Please seek to 16 seconds and watch title page. I do not have permission to post images. I liked this theme and I want to make a ...
5
votes
2answers
1k views
Disable/toggle smallcaps in the title
I am using the amsart document class. I want to to change the text in the titles (such as in \author) to be written normally and not in small caps.
How can I change this globally? That is, so that ...
1
vote
1answer
58 views
Creating title page in revtex with twocolumn layout
I'm trying to create a separate title page for a report in revtex. This works fine if I have single column layout however I want the report to be in two column format. When I have this even including ...
2
votes
0answers
52 views
Pictures not inserting
I am trying to insert a picture using \usepackage[pdftex]{graphicx}. I have that in my preamble, and then I'm attempting to insert a picture on a title page. I use the \includegraphics command. I ...
2
votes
1answer
45 views
Is it possible to apply commands to specific pages (the first page)
Tricky question (for me at least!) I am using revtex which allows you to switch between a one and two column environment using the \onecolumngrid and \twocolumngrid commands.
I would like my first ...
4
votes
2answers
100 views
\and command in \author tag
I have a problem with the \and command in an \author tag. My documentclass is \documentclass[11pt,twoside]{eitExjobb} and the .cls file can be found here: http://cl.ly/code/28202Q2P3I3g
My code:
...
4
votes
2answers
100 views
Funny stuff in a Beamer title irreparably messes with the PDF metadata
I have the following beamer presentation:
\documentclass{beamer}
\usepackage{hyperref}
\title{%
\parbox{.25\textwidth}{funny}%
\parbox{.5\textwidth}{Real Title}%
\parbox{.25\textwidth}{stuff}}
...
3
votes
1answer
89 views
\twosides in KOMA - Why is my titlepage not centered
I'm using scrbook with the twosidesoption, and BCOR=10mm. The title page, being an odd page, has a large margin on the right, and a small margin on the left.
I'm currently using the following to make ...
3
votes
2answers
162 views
How can I make the title of my BeamerPoster appear on the same page as the actual poster?
Here is a minimal example:
\documentclass{beamer}
\usepackage[english]{babel}
\usepackage[orientation=portrait,size=a0]{beamerposter}
\mode<presentation>{%
\usetheme{Frankfurt}%
}
...
3
votes
2answers
58 views
Help with the titlepage
I need to write the title page for my work and I need that the author and director names be in the right side of the page, anyone can help me or give an idea?
This is what i tried
...
3
votes
2answers
69 views
How to make a short running author list?
I am writing a paper (using the amsart class) where we have four authors. The problem is that the author names on the even pages spill over onto the page numbers and obscure them. What I'd like to do ...
2
votes
1answer
75 views
How to typeset the titlepage and its verso in ConTeXt?
I typeset the titlepage and its verso, but it always generate an empty page on the right if facing. My codes are as follows:
\setupinteraction
[state=stop,
title=Life in These Days,
...
0
votes
0answers
15 views
Linespread in titlepage with \huge [duplicate]
What is the right way to increase the line height or spacing between lines in the titlepage environment when you have \huge titles?
I tried to increase it using the \linespread command but whatever ...
7
votes
4answers
125 views
No indent in modified \maketitle in article
I am looking to have the title left justified along with the name of the author and teacher and the date. I have managed to get it left justified but the name is being indented, this is not what I ...
14
votes
2answers
180 views
Extra space behind month for \today with \usepackage[norsk]{babel} in December
When using \today and \usepackage[norsk]{babel} (babel <v3.8l>) in December there is an extra space behind the month name. How do I get around this?
\documentclass{article}
...
4
votes
2answers
126 views
\endnote inside \author tag
I have a rather complicated document of the {scrartcl} class, derived from the .tex file I downloaded off this page http://www.howtotex.com/templates/template-added-two-column-color-article/
I try to ...
5
votes
3answers
159 views
Reparing the \jobname for use in titlehead
If I name a LaTeX file hw1, I want to print Homework 1. How can I do this?
I can print the string hw1 directly using \jobname, but I don't want spaces in my file name or have to type that out each ...
5
votes
3answers
2k views
How to insert an image in the front cover of a report?
I'm pretty new in LaTeX and I'm currently writing my BSc Report.
Does anyone happen to know how I can insert my uni logo on the front cover of my report?
I'm using
...
2
votes
1answer
76 views
Remove footer on title page or change content frame size
How can I change the size of the content frame to align it to the footer line? The distance between TEXT3 and the bottom page edge should be the same as the distance between TEXT1 and the top page ...
11
votes
1answer
223 views
Where can I translate the Bergen beamer style?
I would like to use the Bergen theme with orchid color scheme. It works well, but I have "Who?" and "Where?" on my title page - I would like to translate them to my language. How could I do this the ...
10
votes
1answer
123 views
Putting my name ahead of my co-authors on a latex title page
Grad student here, getting ready to submit a paper. I've done 92% of the work on a paper I'm submitting, but I've got three (senior) co-authors. I want to put my name up top, and put their names in ...
3
votes
1answer
102 views
Authors with multiple affiliations
The problem
Using this template I want to have an author in the list of authors with multiple affiliations.
Like in this mockup ("Othercoauthor" has multiple affiliations):
The code
This is ...
4
votes
3answers
83 views
How to change caption in a figure?
Let us consider the following example:
\documentclass{book}
\usepackage{graphicx}
\begin{document}
\title{\textbf{ \Huge{My \LaTeX}}}
\author{\textbf{MKS}}
\date{\today}
\maketitle
...
2
votes
2answers
232 views
Problem with \maketitle: “there's no line here to end”
I'm using MiKTeX 2.9 and i'm new to TeX.
Simplified, I have this code:
\newcommand{\aone}{Anna}
\newcommand{\atwo}{Bob}
\newcommand{\topic}{Tpoic}
\subject{University \\ Paper}
\title{ \\topic\\ ...
5
votes
1answer
58 views
eso-pic, watermark NOT on title page
I use eso-pic package to put watermark in my document.
It works very well.
But I have a problem with the first page - I would avoid this watermark on first page.
In describing of eso-pic I am not ...
1
vote
1answer
241 views
Moderncv casual header - photo right, name and title on the left
I like the moderncv casual theme, but I would like to change the order of the photo and the name / title.
I tried the solution described in this question:
Modify moderncv header
! Undefined control ...
2
votes
1answer
55 views
footnote rule on cover page
I have a document with a cover page and foonote. I would like to add a rule above the foonote. What is the way to do this?
\documentclass[english,titlepage]{article}
\begin{document}
\title{ddd}
...
1
vote
1answer
63 views
shift title text up with line
I have been inspired by this link; Shift title and author text up?
but when I use the tips on my own group (not using title). I still get that the text starts farther down on the page. I think this is ...
1
vote
1answer
73 views
signature fields beamer class
I want to add multiple (two) signature fields to the bottom of the first page of my beamer document. My first page is a \titlepage. I found a solution but it does not work for the beamer class because ...
1
vote
1answer
49 views
Dedicated ToC page
Currently I'm using:
\documentclass[twocolumn,notitlepage]{article}
\usepackage{verbatim}
\usepackage{amsfonts}
\usepackage{amsmath}
\usepackage{subfigure}
\usepackage{amssymb}
...
1
vote
1answer
63 views
What's the difference between these kinds of redefinitions?
Trying to implement an own titlepage style I am encountering a few problems.
Specifically I am trying to show the authors in a different style (the show case below is not restricted to \author but ...
7
votes
2answers
101 views
Defining \lastname from \author
Is it possible to read the white space in a very simple \author declaration? I understand that it's dangerous to expect such a thing to work very stably, but for a limited use case, I would like to be ...
