Tagged Questions
3
votes
2answers
55 views
Don't want sections to have titles/headers [duplicate]
If you use a default section in an article like this:
\section{something}
Lorem ipsum dolor sit amet
you get the "1 something" in the toc. And your page looks like this:
1 something
Lorem ...
3
votes
1answer
30 views
titleformat has no effect!
I have tried to specify the color for my section as shown here, but it has no effect. What am I doing wrong?
MWE:
\documentclass[10pt,letterpaper]{article}
\usepackage{lipsum}
\usepackage{multirow}
...
4
votes
1answer
52 views
Same vertical spacing for chapter and chapter*
I use \chapter*{} in the \frontmatter and \chapter{} in the \mainmatter.
I use titlesec and the styling of the chapter headings is this:
\documentclass[10pt,a4paper,openany,oneside]{book}
...
...
3
votes
2answers
52 views
Section command with default spaces between title and rule
Ho can I make a section command that have the same spaces between the \titlerule and the title of the original \section command? The overall look must be equal to the original \section command. So, Is ...
4
votes
1answer
31 views
Is there any way to put the section numbers after titles like “axiom”, “theorem”, etc?
The normal LaTeX input and output would be something like
\subsection{Theorem (Fundamental Theorem of Calculus)}
1.1 Theorem (Fundamental Theorem of Calculus)
Is there any way to use a ...
5
votes
0answers
83 views
titlesec titlemarks not working with pdfcolparallel
As you can see from the screenshot the numbers showing the verse locations in the titlemarks only show the very last values which were set. If you comment out the line \usepackage{pdfcolparallel} and ...
4
votes
1answer
50 views
Bad cross-reference using titlesec
When I define two new level using titlesec, the reference doesn't work correctly.
This is an example:
\documentclass{article}
\usepackage{titlesec}
% First level
...
4
votes
1answer
70 views
how to add number to the title of sections and subsection using the titlesec package
I am using the titlesec package but the numbering of section and subsections disappeared. I need to retrieve it. my code is
...
3
votes
2answers
68 views
The problem with the command: titleformat it is important
This is my first post here.
I am using a few commands and packages to make the titles behave according to my thesis specifications but when I used the \titleformat I get an error:
! Package ...
4
votes
2answers
90 views
How can I get legal style indentation on section, subsection, subsubsec.. using titlesec?
So far, I've been trying code from various examples, and landed with:
\usepackage(titlesec)
\titleformat{\section}[block]{\bfseries}{\thesection.}{1em}{}
...
0
votes
1answer
82 views
modifying the page header
This is a MWE
\documentclass[paper=a4,10pt, twoside]{scrbook}%
\usepackage{tgtermes}
\usepackage[titles]{tocloft}
\setcounter{tocdepth}{3}
\makeatletter
...
1
vote
2answers
101 views
Spacing before and after section titles
I know this subject has been mentioned before, but I'm still having a problem in creating a space under a section title. I used the titlesec package and then tried using the command ...
3
votes
2answers
61 views
\clearpage after every subsubsection
I'd like to clear the page at the end of every \subsubsection. I tried
\usepackage{titlesec}
\newcommand{\subsubsectionbreak}{\clearpage}
But this appears to force a \clearpage at the start of ...
2
votes
0answers
54 views
Follow-up question to: titlesec: \sectionmark breaking \ifthesection?
In answer to this question egreg showed how to trick titlesec into ignoring the fact that sectionmark command makes \ifthesection false when defining customization commands in headers. The solution ...
0
votes
1answer
53 views
Strict \titlespacing without glue
Problem Description
TeX seems to adjust the vertical space in a 2-column document, even though I have specified that no stretching or shrinking is to occur using \titlespacing. A short visualization ...
2
votes
1answer
50 views
\titlespacing* defaults using the compact option
Using the titlesec package with the compact option, what are the \titlespacing* defaults (for \section, \subsection, etc.) for the article document class? (I have the standard defaults from the ...
1
vote
0answers
27 views
Latex: conflict titlesec and tikz packages [duplicate]
I am using the IEEEtran class and I also call in my preamble the titlesec and tikz packages.
If tikz is not called my code runs fine. Otherwise, (when calling the tikz package) I am given this error ...
3
votes
1answer
62 views
New titleclass not counted in the table of contents
The following defines a new titleclass which I would prefer not counted in the table of contents defined. How can this be achieved?
\documentclass{book}
\usepackage{titlesec}
\usepackage{titletoc}
...
5
votes
1answer
77 views
Spacing in \chaptertitlename
Consider the following MWE:
\documentclass{book}
\usepackage{titlesec}
\usepackage{lipsum} % just to generate text for the example
\usepackage[tracking=smallcaps]{microtype}
...
0
votes
1answer
88 views
fancy heading … \section{} titles disappears
By combining the next two questions-answers Fancy chapter headings and Section title gradient
. I have this effect.
The problem is that the name of \section{} disappears. What is wrong?
...
1
vote
1answer
58 views
How to use a counter inside \titleformat in LaTeX?
I am writing a text in LaTeX and I want my \paragraphs to be numerated. I am using package titlesec and the following sentences:
\newcounter{artNumber}
\setcounter{artNumber}{1}
...
3
votes
1answer
135 views
Custom chapter title protruding in left margin
Based on this answer, I tried my hand at defining my own chapter title formatting. The idea is to align the chapter title to the right (a chapter always opening on an odd page) and underline it with a ...
2
votes
1answer
251 views
How to change section/subsection font size? [duplicate]
I'm writing a paper that requires the section titles to be in 12pt font, I can get the title to be in 12pt using:
\section{\fontsize{12}{15}\selectfont Introduction}
but the section number does not ...
3
votes
3answers
98 views
Double Names being included in Table of Contents
I have a final report that I am writing in LaTeX. I have a code to make the section headings appear in the center of the page (thanks to Jubobs):
\titleformat{\section}
...
2
votes
2answers
135 views
extra } when use titlesec package
In the .tex file, I want to use the package titlesec. But there is a error:
! Argument of \subparagraph has an extra }.
Is there some simple method to fix this?
The code is:
...
3
votes
2answers
193 views
Section title with subtitle
I'm using the memoir class, I would like to create a more fancy section title, but I don't have the necessary skills in LaTeX. I found many fancy section titles on this forum, but I don't know how to ...
1
vote
1answer
61 views
Conflict between titlesec and colortbl
I'm getting a conflict between titlesec and colortbl that I can't seem to fix.
The minimal working example is below. As soon as I put a \section in, pdflatex errors with ! Missing number, treated as ...
1
vote
1answer
79 views
titlesec and \section* in \titleformat
I use \titleformat (titlesec package) to make some fancy headings in my documents. But I did not find a way to know, in the \titleformat specifications, if the section is made with a \section or a ...
4
votes
1answer
107 views
Multiline title vertical alignment using classicthesis and arsclassica
I would like to align the 2nd line of my title to have the same baseline with the chapter number. What I have now is
, but I would like to have
instead.
I found that the tweak in How to get ...
15
votes
1answer
323 views
Different vertical spacing (parskip) between concurrent section titles and paragraphs
I'm trying to remove the spacing between section headings, but maintain the paragraph to section heading spacing.
Even though I set titlespacing before and after to *0, there is still spacing - quite ...
7
votes
2answers
138 views
Page number in the margin and separator
I want to produce this kind of header.
My first attempt includes the use of fancyhdr package but still I can't figure out how it is possible to move the page number in the margin and put the | bold ...
2
votes
1answer
74 views
Transfering Style of Sectioning-Titles to TOC-, LOF-, LOT-Titles
This is a continuation of my last (answered) question:
I want to style the Title of TOC, LOF and LOT exactly the same as the Sectioning-Titles. Problem is that they (a) start "higher" than normal ...
5
votes
1answer
127 views
Emulating book-class-sectioning using titlesec and modifiying it
In short:
Prerequisite: Need to emulate book-class for \part and \chapter using titlesec
Change both to hang, start on same page
Add titlerule to \chapter
I want to optimize my rather hacked ...
2
votes
1answer
73 views
Make the titles centered using the titlesec package
I am using the titlesec package to better define my section headings. I have a question about it: How can I make the titles already centered in the middle of the page? I have them centered (at the top ...
1
vote
1answer
119 views
Titletoc and Titlesec in just some chapters
I have a twocolumn document and I should insert the minitoc in the first chapters with titlesec and titletoc. I read the answer to Customize minitoc; however, if I change the \titleformat before ...
4
votes
2answers
162 views
Heading number in margin using titlesec and/or komascript
Using titlesec and/or komascript how do I format all headings so the number is left aligned in the margin, the title to the right, with a horizontal rule underneath it all (from margin to text width ...
15
votes
4answers
300 views
Using fixed space aroung headings to get text in sync with baseline grid
In order to make my text stay in sync with the baseline grid, I've set the vertical spacing before and after \section headings to integer multiples of \baselineskip (using the titlesec package). A ...
1
vote
1answer
101 views
Special chapter title formatting
Using the book class. I would like to have chapter titles that look like this:
| CHAPTER ## |
| Chapter Title (italic) |
Can titlesec do this?
0
votes
0answers
141 views
Paragraph headings followed by line space and no indent, but indents or line space for “unheaded” paragraphs [closed]
I would like to have paragraphs with a heading followed by a line space (i.e. blank line) and then no indent for paragraph text after that line space.
By "paragraphs with a heading", I mean ...
0
votes
1answer
100 views
\titleformat does not seem to work when used within a class file
The following block of code doesn't seem to do anything when I define it in a custom class. But when I use the class but put this block in my preamble, it works as expected.
\titleformat{\chapter}
...
3
votes
1answer
120 views
Two-line spanning number in chapter title
I try to have the chapter's number in my document twice as big as the title on the left and the two-line chapter title on the right. The number should span two lines, so the two lines of the title are ...
4
votes
1answer
83 views
Customize the section title with Latin Modern
I have created a thesis using mathptmx font. Now I would like to customize only the section title using Latin Modern Sans Bold.
I used titlesec with
\usepackage{titlesec}
\titleformat{\section}
...
7
votes
3answers
284 views
How can I make \titlespacing not omit the top spacing?
In a multicols*{2} environment for 12pt linehight text, I use
\titlespacing*{\subsection}{0pt}{12pt}{12pt}
To create exactly 12pt of space before and after subsections. Together with a line height ...
1
vote
2answers
94 views
Add a hrule to only chapter not numbered
I am thinking of adding a hrule to only chapters that are not numbered, in other words the chapters created using chapter*{}. I thought of using the titlesec package- My problem is that I cannot find ...
7
votes
1answer
191 views
Translating custom \section format to titlesec
I have some custom \section formatting with a horizontal rule, and I'm trying to DRY out my code by using titlesec to define default formatting options. But I can't exactly reproduce what happens when ...
6
votes
1answer
166 views
Title between lines
So I want to have one line above and one under the title of a chapter in scrreprt, like:
_________________________________________________
1. Introduction
...
5
votes
1answer
102 views
Section header for references shows wrong number
So I downloaded a nice looking article template which has a custom look for section titles. But now the number next to the References header is the same as that of the last section.
How do I fix ...
7
votes
1answer
103 views
titlesec: why is contents a section?
I've been playing around with the titlesec package combined with the scrartcl class. I find the headings titles of scrartcl a bit ugly, but I do like the fact that I can scale font sizes to 8pt.
...
1
vote
1answer
203 views
titlesec - set top margin for the appendix and bibliography
A while ago I was helped using titlesec to format the chapter title for my thesis. Today a reviewer says that the appendix and the bibliography need 1in top margin. How do I do it? Thanks.
...
1
vote
1answer
111 views
Using titlesec in beamerarticle with a modified section command
This is further to the solution provided to my previous question about allocating short and long titles correctly to the beamer and article output of a beamerarticle.
The solution provided there ...
