{titlesec} is a package providing an interface to {sectioning} commands.

learn more… | top users | synonyms

5
votes
1answer
284 views

Section header for references shows wrong number

So I downloaded a nice looking article template which has a custom look for section titles. But now the number next to the References header is the same as that of the last section. How do I fix ...
5
votes
1answer
1k views

Setting the upper margin of chapter titles in scrbook

In a scrbook document I need to set the chapter titles close to the upper page margin, without leading number and with a \hrule afterwards. Redefining \chapterheadstartvskip does the trick with the ...
5
votes
2answers
198 views

Section title with runin and KOMA class?

I would like to have section titles with runin so that there is no newline after the section title. This can be done with \documentclass{article} \usepackage{titlesec} ...
5
votes
1answer
1k views

How to affect the vertical gap between the glossary's name and its body

I'm using the glossaries package for producing of nomenclature/symbols/acronyms lists, but I don't know how to influence the vertical gap between the glossary title and the first glossary entry. ...
5
votes
1answer
3k views

Add a rule after chapter title using titlesec

I've been experimenting with chapter title formatting using titlesec but I can't seem to find the proper way to add a rule just below the chapter title. After reading the doc, I found that \titleline ...
5
votes
1answer
215 views

Title formatting with graphics

I am trying to achieve this look for my chapter titles: To achieve this formatting I use titlesec package like this : \titleformat{name=\chapter}[hang] ...
5
votes
2answers
282 views

Adjust settings that determine when sections should start on a new page/column

I'm using titlesec in a two column environment, and sometimes my sections start on a new page or the second column, and leave blocks of white space at the bottom of the previous page/column. I am ...
5
votes
1answer
59 views

Change Sectional Skip Conditioned on Text Existing or not Before Sectional Division

I have a simple document layout with a main heading for the title, and the possibility of starting the first sectional unit (with a standard \section command) right after the title -- meaning, with no ...
5
votes
1answer
188 views

titlesec titlemarks not working with pdfcolparallel

As you can see from the screenshot the numbers showing the verse locations in the titlemarks only show the very last values which were set. If you comment out the line \usepackage{pdfcolparallel} and ...
5
votes
2answers
994 views

Vertical Text Alignment in Title

I'm trying to make a title format with a large chapter number, and then smaller text with the name of the title. The following code mostly does what I want: \documentclass[12pt]{book} ...
4
votes
1answer
4k views

Usage of titlesec package when numbering sections

This question evolved from my earlier question posted here. It turnt out that what I gave as the MWE actually worked, so I investigated a bit and found the real problem. I have a document in which I ...
4
votes
2answers
1k views

Section title with subtitle

I'm using the memoir class, I would like to create a more fancy section title, but I don't have the necessary skills in LaTeX. I found many fancy section titles on this forum, but I don't know how to ...
4
votes
2answers
795 views

insert code before chapter title

I would like to insert some code before the chapter title appears. I have defined: \newcommand{\toptitle}[2]{\itshape #1 \hfill #2 \par} Then, if I am writing for example: \begin{document} ...
4
votes
2answers
78 views

Start new page with each part

How can I automatically start a new page with each part? I found this answer, which work nicely for section breaks, but was unable to customize the command to works with parts. I looked the titlesec ...
4
votes
2answers
277 views

How to have colored headings with one color per chapter

I'm typesetting a proceedings-style book that contains articles in their chronological order. Since the articles are also categorized, each category is assigned a color and the the chapter styles are ...
4
votes
2answers
2k views

How to adjust the size and placement of chapter heading in report class

How could I adjust the size and placement of chapter heading in my custom class? I am using report class as my base. When I used titlesec package inside my custom class, it threw error ! Package ...
4
votes
2answers
1k views

Problems with titlesec, hyperref, biblatex and tocbibind

I am using the titlesec package to change the section font to sans-serif. Unfortunately, this breaks the links to "unnumbered" sections both in the TOC and in the bookmarks sidebar of PDF readers. I ...
4
votes
1answer
2k views

Automatically adding \noindent after \section{*}

I'm using titlesec package and a document class ABNT Class which follows a Brazilian standard for document development. So far I've managed to follow the Brazilian Computer Association guidelines for ...
4
votes
1answer
479 views

Funny-ness with titlesec and section labels (“missing \begin{document}”)

Having a problem somewhat akin to "How to put section number into the right side of section title in LaTeX" (and neither of the two answers there floating my boat), I was tinkering with titlesec, and ...
4
votes
1answer
79 views

How can I calculate the distance added between a title and a titlerule?

Question How can I calculate the distance after a title such that I can place a node where the title rule would go? Example I would like a bar to drop from the top righthand corner of the page down ...
4
votes
2answers
423 views

titlesec troubles

I am working on a document that will consist of many sections and subsections. I want to have a table of contents per section. I am using titlesec, titletoc and titleps. I have the following MWE: ...
4
votes
2answers
443 views

Problem with titlesec/titletoc/tikz

I have a problem in the sheet dedicated to the table of contents. I'm using titlesec/titletoc/tikz which works fine except in the page "table of contents". I have this result : The problem is that ...
4
votes
2answers
507 views

Chapters and verses of current page in header

This question is linked to my other titlesec question Does any one know how to add the current segment location at the top of any particular page. What I need is the reference at the top of a ...
4
votes
2answers
2k views

titlesec versus titling; mangling \thetitle

I want to have the chapter name and title of the document appear in the header; I know how to do that with fancyhdr and titling, one of the miscellaneous functions of the latter is to preserve the ...
4
votes
2answers
852 views

Chapter title format back to default

I messed with various chapter title formats and now that I want to go back to default i.e Chapter 1 Title I only get 1.Title which misses "Chapter 1" appearing before the chapter title. I ...
4
votes
1answer
337 views

Titlesec, runin shape and amsthm

I'm trying to have an old fashioned style of (sub)section numbering as in EGA (Eléments de Géométrie Algébrique, by A.Grothendieck and J.Dieudonné). For a LaTeX written example, see here. I did it ...
4
votes
1answer
285 views

Customizing titlesec

I've read through section 2 and 3 of titlesec's package documentation, and unfortunately I find it extremely cryptic, so I've given up trying to come to terms with it. Please bear with me as I'm just ...
4
votes
2answers
271 views

same space between number and text in chapters/sections

I have been googleing for several hours now, my goal is to have the same indent for each chapter/section. Meaning there is the number but every chapter starts for example at 3cm from the left margin. ...
4
votes
1answer
211 views

Problems with paragraphs in margins

I am writing some papers for my class, and want to number the tasks with two or three levels. The first level should be a simple number like 1), while the next level should be labeled by numbers. ...
4
votes
2answers
810 views

Memoir class — Displayed heading for subsubsection

I am trying to make a subsection heading with the memoir class. The problem is the following: I want to have a displayed heading for my subsubsection. The text should begin right after the subsubsec ...
4
votes
2answers
56 views

Preserving part of Chapter text “as is”, from becoming uppercase as per titlesec definition?

Having this MWE: \documentclass{book} \usepackage[explicit]{titlesec} \titleformat{\chapter}[block]{\filcenter}{}{0pt}{\MakeUppercase{#1}} \begin{document} \chapter*{This should be all Uppercase. ...
4
votes
1answer
193 views

How to underline a section's title without using the sectsty package (memoir class)?

Can anyone tell me how to underline a section's title without using the sectsty package please? Indeed I am using the memoir class which prohibits this package. Thank You.
4
votes
4answers
195 views

Spacing capitals in section headings

I'm using titlesec to customise my section headings. I want to have my subsections in capitals, which I can achieve with the \uppercase function, but all typographic style guides suggest that caps ...
4
votes
2answers
166 views

Remove whitespace above section title with image formatted with leftmargin

I am trying to remove the whitespace above a title that is formatted with leftmargin and that also has an image as part of it. The problem is very similar to this question, but the solution there does ...
4
votes
1answer
603 views

Change chapter title format in scrreprt without titlesec?

I'm working with scrreprt and I have loaded minitoc to have a short TOC after each chapter title. However when I give the \chapter command I get: 1 Chapter Title I'd like to have: Chapter 1 ...
4
votes
2answers
182 views

Numbering the table of contents

I'm new to latex. I have successfully formatted the chapter heading, section heading and subsection heading with titlesec package: \usepackage{titlesec} \titleformat {\chapter} ...
4
votes
1answer
602 views

how to add number to the title of sections and subsection using the titlesec package

I am using the titlesec package but the numbering of section and subsections disappeared. I need to retrieve it. my code is ...
4
votes
1answer
10k views

“Missing \endcsname inserted” and other errors when trying to align title section

I want to somehow align section headings: unnumbered should be centerized; numbered should be aligned left and indented. I'm just trying to compile an example ...
4
votes
2answers
1k views

Vertical space after title of unnumbered chapters (bibliography/ToC)

The title pretty much says it all: It is possible to add arbitrary vertical space after the title of the ToC or bibliography page within the report document class?
4
votes
1answer
116 views

Starting counter from 0

I'm working on a sheet of exercises using LaTeX. I've set up my sections to look like Exercise # | <title>. How can I force the section counter to start from 0, so that I can have an exercise 0 ...
4
votes
1answer
97 views

Help on adding color option to chapter title

I'm trying to create an option to easily change a color bar in a chapter title. This code works on changing the color of the bar, but ruins the formatting. All of the chapter text is to be aligned ...
4
votes
2answers
166 views

Different numbering format between toc and body

To complete my memory, I would like to display different numbering format beetween my section in the body of my document and the one in the toc You will find just below my MWE : \documentclass{book} ...
4
votes
3answers
603 views

Chapter Title adjusting with koma-script

The following minimal working example is not giving me the desired results. I would like to keep the chapter titles layout, but without using the titlesec package. The titlesec package is interfering ...
4
votes
1answer
738 views

Customizing the style of the “Table of Contents” title

I used titlesec for customizing chapter titles. How can I put the Table of contents title above the horizontal line? (I am trying to customize the place of the title, not the title) Added figure is ...
4
votes
1answer
150 views

another specific section format

Is there a way to implement the following style in LaTeX? "Sections should be numbered using upper-case roman numerals (I, II, III, etc.). Section titles should appear on the first line of text, ...
4
votes
1answer
856 views

\normalsize for \section, \subsection and \subsubsection

I tried to change the font size of titles using titlesec, I want all my document in normalsize, and I have an error. Please help me. The error description is: Runaway argument? ./Thesis.tex:13: ...
4
votes
1answer
260 views

Same vertical spacing for chapter and chapter*

I use \chapter*{} in the \frontmatter and \chapter{} in the \mainmatter. I use titlesec and the styling of the chapter headings is this: \documentclass[10pt,a4paper,openany,oneside]{book} ... ...
4
votes
1answer
2k views

Chapter title alignment with titleformat

I am trying to typeset a title with titleformat as in the following example: I like the overall result, but when the title wraps around it is not left-aligned. Is there any way to indent the second ...
4
votes
1answer
250 views

Customize the section title with Latin Modern

I have created a thesis using mathptmx font. Now I would like to customize only the section title using Latin Modern Sans Bold. I used titlesec with \usepackage{titlesec} \titleformat{\section} ...
4
votes
1answer
525 views

\addvspace after a titlesec heading

So, I'm trying to make an environment that is always padded above and below by a certain vertical space, no more and no less (unless the previous or following elements require even more space). My ...