{titlesec} is a package providing an interface to {sectioning} commands.

learn more… | top users | synonyms

1
vote
1answer
2k views

titlesec - set top margin for the appendix and bibliography

A while ago I was helped using titlesec to format the chapter title for my thesis. Today a reviewer says that the appendix and the bibliography need 1in top margin. How do I do it? Thanks. ...
1
vote
1answer
282 views

How to change the formatting of chapter titles in the endnotes

I'm using pagenotes in the memoir class for a book. This is all the code I'm using that I think is relevant: \let\pagenote=\endnote \makeatletter \renewcommand*\prenotetext{% \list{}{% ...
1
vote
2answers
823 views

Use sections “inline”

How can I get the startpoints for my sections (see top part of MWE) as one inline text, similar to what can be done with the bottom part of my MWE? I need the sections since my title marks etc work ...
1
vote
1answer
454 views

is it possible to fake the amsart class format?

I often use the amsart documentclass. I like it because it is very compact (it also seems to be an industry standard in my area). What I don't like about it is that I'm not able to use kpfonts or ...
1
vote
1answer
76 views

Chapter formatting and spacing

I use report document class and the thing is that I would like to change the chapter both in format, letterspace and place on the page. Right now a chapter look like this: I want it to look like ...
1
vote
1answer
38 views

Make subsection text appear left aligned within the defined left margin?

How can I make subsection text appear left aligned within the defined left margin, with its "own" margin of 0.75in (instead of 3.0in)? I believe the package for the task is titlesec but I'm open to ...
1
vote
1answer
73 views

Problems with \nameref{} not refering to the correct label x titlesec

I'm using hyperref package to do cross-referencing, but I'm encountering some problems and it is related to \usepackage{titlesec,titleps} , for instance: \documentclass[a4paper,12pt,twoside]{report} ...
1
vote
1answer
246 views

How to use a counter inside \titleformat in LaTeX?

I am writing a text in LaTeX and I want my \paragraphs to be numerated. I am using package titlesec and the following sentences: \newcounter{artNumber} \setcounter{artNumber}{1} ...
1
vote
1answer
179 views

Why chapter label below the section label on new page even if by setting same spacing before title (use titlesec package)?

\documentclass{book} \usepackage[margin=0pt,papersize={50pt,70pt}]{geometry} \usepackage{titlesec} \titleformat{\chapter}{\Huge\bfseries}{}{0em}{} \titleformat{\section}{\Huge\bfseries}{}{0em}{} ...
1
vote
1answer
31 views

titlesec: different formats for numbered and unnumbered sections/chapters

I'm not sure if this is too minimal. (In the real document the problem appears at the bibliography, table of contents and \chapter*) \documentclass[a4paper, 11pt]{report} \usepackage[utf8]{inputenc} ...
1
vote
2answers
46 views

Change color of numbers of sections

I want to change this box in which I have the section number to black, which I can do. But then the text is the same color and illegible. I need to make it white. I tried this but it didn't do ...
1
vote
1answer
43 views

Latex document contains only \section{}?

I want to typeset a document with desired output such as: 1. blah blah ... blah blah .... 2. blah blah ... blah blah .... 3. blah blah ... blah blah .... That is simply numbered ...
1
vote
1answer
57 views

Text titles in table

I'm trying to universally adjust my text titles via titlesec package. Though I cannot use those titles (subparagraph in my case) in a table - there are excessive vertical gaps I'm not able to get rid ...
1
vote
1answer
83 views

tex4ht table of contents problems related to titlesec

I am having a problem that titlesec is making the sections disappear from the tex4ht table of contents. Here is the M(N)WE: \documentclass[10pt]{book} \usepackage{titlesec} \usepackage{titletoc} ...
1
vote
1answer
365 views

Titlerule and Wrapfig Interaction

Hey y'all I need some help! I would like to have my section headers have a titlerule underneath, but titlerule isn't playing nice with wrapfig. I'm using wrapfig and tcolorbox to make a sidebar, and ...
1
vote
1answer
161 views

\titleformat (titlesec) overfull vbox page break issue

I am currently writing a rule book using sections/subsections/subsubsection/paragraphs to break the rules down into parts. I am using the titlesec package to format the sections; however, the problem ...
1
vote
1answer
414 views

How do I put a short title in the header but a long title in the toc (clashing of titlesec package with sectionmark)?

The format of my thesis is as follows: \documentclass[oneside,11pt,english]{book} \usepackage{lipsum} \usepackage{fancyhdr} \usepackage{titlesec} \setlength{\headheight}{26pt} ...
1
vote
1answer
277 views

\titleformat is causing the section title to appear twice in Table of Contents

Here is how it shows: The section appears twice. Ideally I'd like it to be BACKGROUND AND RATIONALE with that dot and no bold. Here is the \titleformat that is causing this behavior: ...
1
vote
1answer
246 views

titlesec: \assignpagestyle problem with part

According to the titlesec documentation (section 3.5): You can assign a page style to levels of class top and page, as well as the default chapter with the following command: ...
1
vote
1answer
255 views

Titlesec: \ifthesection command issue with biblatex refsegment

I'm using titlesec to set my page style and biblatex to print a cumulative bibliography subdivided by chapter. There seems to be some problem with the \ifthesection command because in the following ...
1
vote
1answer
595 views

Strict \titlespacing without glue

Problem Description TeX seems to adjust the vertical space in a 2-column document, even though I have specified that no stretching or shrinking is to occur using \titlespacing. A short visualization ...
1
vote
1answer
282 views

Conflict between the packages titlesec and marginnote

In the following code, the use of the package titlesec modifies dramatically the formatting based on the package marginnote. The package titlesec is needed so as to use this. Is there one possibility ...
1
vote
2answers
1k views

Customizing Table of Contents Formatting

For the most part, the default formatting for the ToC, LoF, and LoT is fine. But I need to add an extra line (university's requirements for my thesis) between each numbered entry. In order to do this, ...
1
vote
1answer
842 views

Hiding chapter headings and including chapter name in section headings

I would like chapter names to not be printed but to appear in each section heading. For example: \chapter{Mychapter} \section{} \blinddocument \section{} Would print something like Mychapter 1 ...
1
vote
1answer
11 views

inline uppercase chapter title

Hi I want to put the chapters title in one line and uppercase, I found this code that makes it inline but how ti make it uppercase too code: \usepackage{titlesec} \titleformat{\chapter}[hang] ...
1
vote
2answers
48 views

Reduce white space above chapter title, and reduce space between title and text, for unnumbered chapters

How can I reduce the white space above the chapter heading? How can I reduce the space between the heading and the text? I want to be able to do this for selected chapters only, or after a given ...
1
vote
1answer
33 views

Tracking in chapter titles with titlesec

I've been trying to add tracking (letter spacing) to my chapter titles with titlesec, but to no avail. I'm using fontspec and XeTeX, so microtype isn't available to me. Another post said this can be ...
1
vote
1answer
35 views

How to set chapter layout to default?

I changed my chapter layout using the package "titlesec". Logically, the new layout impacts the heading of the table of contents and the bibliography as both are classified as "chapters". Is there a ...
1
vote
1answer
79 views

Customizing titlesec-etoc (further question)

Referring to this discussion: Further titlesec-etoc customization, I've a further question. Consider the fine working code furnished to me by Gonzalo Medina: \documentclass[a4paper,11pt]{report} ...
1
vote
1answer
41 views

linebreaking when using raisebox in section

How to break the line when using raisebox command in \section. My MWE is : \documentclass{book} \usepackage[explicit]{titlesec} \usepackage{lmodern} \usepackage{graphicx} ...
1
vote
1answer
77 views

How can I access short section content to avoid repetition?

I'm making frequent use of short section names for styling. I want the short names to appear in page headers and the longer name only in the document itself. I have that worked out, but it requires a ...
1
vote
1answer
194 views

Using titlesec to have \chaptertitle and \sectiontitle in twosided report

I would like to customize the headers of my report. These should contain chaptertitle and sectiontitle. From here: Header not displaying correctly on chapter page due to subsection I have made an ...
1
vote
1answer
76 views

Indent entire section using only preamble

I heavily use org-mode in Emacs to create TODO lists with timekeeping, which has a handy export to LaTeX feature. The problem is that in order to get my exported LaTeX document to look right, I want ...
1
vote
1answer
312 views

Using titlesec in beamerarticle with a modified section command

This is further to the solution provided to my previous question about allocating short and long titles correctly to the beamer and article output of a beamerarticle. The solution provided there ...
1
vote
1answer
665 views

Titlesec ruins Table of Contents formatting

I'm trying to use the titlesec package, but somehow section names in the \tableofcontents become overlapped with the TOC numbers and subsection names become improperly indented. Here's an example, ...
1
vote
1answer
319 views

Help understanding/debugging spacing around headings (and other places)

I am trying to get my headings set up to meet my university's thesis formatting requirement. I'm using the titlesec package because it has the ability to suppress the spacing before the second heading ...
1
vote
0answers
36 views

Titlesec problem with hang indent

I am trying to edit my subsection format with titlesec package. I'm using a runin style and adding a \hangindent to try and get the words following but the downside to that is when section numbering ...
1
vote
0answers
44 views

Formatting Appendix Title

I'm having a heck of a time trying to get the \chapter titles in my appendix section formatted correctly. My goal is to make it look something like this : I am able to change Appendix to Annex by ...
1
vote
2answers
37 views

Include class numbering in TOC with a subclass entry when using titlesec and titletoc

I am trying to use titleclass to define two new classes : savoir and subsavoir. In the TOC, I would like to get something like this : Savoir 1 -- First knowkledge title Savoir 1.a -- First ...
1
vote
1answer
97 views

Classicthesis remove cleardoublepage after part [closed]

I am trying to remove the double page break after the start of each part in classicthesis v4.1. I believe I need to modify the following code on lines 376-381 of classicthesis.sty: ...
1
vote
0answers
34 views

What are skip values? [duplicate]

On page 5 of the titlesec manual (released on June 14, 2000), it is written that full skip values, including the plus and minus parameters can be abbreviated as * n. The example on page 24-25 (the ...
1
vote
0answers
84 views

How to match vertical alignment of titlesec with tocloft?

I want to vertically align the Contents title including the horizontal rules (using tocloft) with the Introduction chapter title (using titlesec). However, I am confused as both packages seem to ...
1
vote
0answers
93 views

Missing font shapes [closed]

I have a problem with missing font shapes. I'm working on lecture notes and made some corrections to a very large latex document, so I did not set up everything by myself. Now I encoutered the problem ...
1
vote
0answers
66 views

New class prevent XeLaTeX to compile the section title

I created a new class, called capitulo to prevent a page break with every chapter. But when I activate those code lines, the section number won't print. Here's a MWE: ...
1
vote
0answers
84 views

How to get just ONE space between the number of a section's title and its title in the TOC (memoir class)? [closed]

In my Toc Iam trying to get just one space from the escape key between the number of the section and its title. Example (TOC): 1. My section For the moment, I am using this many time: ...
1
vote
0answers
141 views

Different format styles for section and appendix titles

I'm using the appendix and titlesec packages to control section titles and formatting. I would like to redefine the appearance of appendix section titles: How can I define the appendix title style to ...
1
vote
1answer
586 views

title chapter in middle of page latex

I try to put title of my chapter in middle of page, so google it and i finish with this, \titleformat{\chapter}[display] {\normalfont\huge\bfseries\centering}{\chaptertitlename\ ...
1
vote
0answers
62 views

titleformat deviation from specified vertical space

I have specified using titleformat (titlesec) the distances around different headings. This works fine, however sometimes, LaTeX deviates from the specified spaces, presumably to better fill up the ...
1
vote
0answers
85 views

Setup Multiline Title in Titlesec

I need to put next line in multiline title aligned with label title. How can I accomplish this? I guess it has to do with removing the auto-indentation of the next line.
1
vote
0answers
61 views

Figure between title number and title [closed]

I'm using titlesec package and \titleformat command in display shape mode. (Unfortunately I am forced to do it, it's the format required for MSc thesis in my university...). The command in my .cls ...