2
votes
1answer
68 views

Tikz/Forest: highlighting level background

I am using the Forest package and I am trying to paint a gray background for odd and even rows, as well as a label. I already had a version of this diagram that I wrote "manually" with tikz. But it ...
0
votes
0answers
56 views

how can improve this tree (forest package) to fit in classicthesis?

I just learnt about the forest package, and following another question in this site, I produced a forest tree (see mwe). The question is very simple: how can I improve this tree? Indeed, I feel that ...
7
votes
2answers
272 views

Trees with only leaves in TikZ

Following Roel's answer to How to write a tree with no (visible) root with TikZ? I attempted to visualise my Huffman-Code for "Tennessee", but it didn't turn out as I expected: My MWE: ...
4
votes
2answers
105 views

representing a null child in a binary tree using `ground` symbol

I'm using ground symbol to represent a null child in a binary tree. But the ground symbol has arrows in it. How do I remove them? \documentclass{llncs} \usepackage{llncsdoc} \usepackage{tikz} ...
4
votes
3answers
254 views

Draw a binary tree using tikz

I'm trying to draw a binary tree using tikz package. If I use only circle, I get a tree. But I want to represent a subtree using a triangle. Now the tree gets uneven. I want to attach the arrows to ...
5
votes
1answer
159 views

TikZ: Re-arranging the hierarchical diagram

I was quite impressed by the solution given by "cfr" for the question posted here. Can you suggest a method to change the two main children (labelled Projection matrix Theory and Reconstruction ...
3
votes
1answer
162 views

Horizontal Probability Tree with Level Labels

I'm trying to create a Horizontal Probability Tree with Level Labels using tikz. (Not tikz-qtree). Right now, I have a horizontal tree. The labels are NOT aligned to the top of the diagram. I would ...
3
votes
1answer
101 views

Specifying the depth of a binary tree on the side

I'm trying to draw a tree, and I want to specify its depth along the side with a double headed arrow with the depth written on the arrow. Here is what I have so far: \begin{tikzpicture}[<-, ...
3
votes
0answers
103 views

Using tikz overlay / remember picture option with forest trees

I want to connect two forest trees with an arrow, in a similar way it is discussed here for plain tikz trees. However, it seems to be impossible to add options to the forest environment in a similar ...
2
votes
1answer
103 views

Regular Expression AST with forest or qtree

I would like to represent an abstract syntax tree over a regular expression. Preferable in the form of the following tree: <regexp> | ...
4
votes
1answer
151 views

Problem with probability tree

I am trying to make in LaTeX this probability tree: I tried using the tikz package but I keep having some issues. This is the best I got so far (link: ...
3
votes
0answers
41 views

How to draw a tree with fixed node distances? [duplicate]

I am trying to build on the filesystem tree example. I have a similar requirement to display a hierarchical tree, but I'm struggling to get the tree layout right. In the example, the link between a ...
2
votes
1answer
81 views

How can I coerce TikZ trees to have directed edges? [duplicate]

Consider the following \documentclass[tikz]{standalone} \begin{document} \begin{tikzpicture} \node{A} [grow=east] child {node{B} child {node{C}}}; \end{tikzpicture} \end{document} which ...
7
votes
2answers
230 views

Special tree in tikz

I'm trying to draw a tree like this: The root has three children and every of this two... The nodes in the first two tiers has additional informations.. I searched for examples like that, but could ...
7
votes
1answer
251 views

Automatic connection of text points in tikz-qtree

I have to draw pictures like the following a lot: I want to use tikz-qtree, since I have a lot of trees and this package simplifies things considerably. Right now I use the following code, since it ...
3
votes
2answers
1k views

tikz tree fork down edge labels

\documentclass{article} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} \begin{tikzpicture}[level distance=1.5cm, level 1/.style={sibling distance=3.5cm}, level 2/.style={sibling ...
4
votes
1answer
155 views

pgf/tikz line to triangle

I'm trying to draw a simple tree. Here's the latex code: \begin{tikzpicture} \node at (2,-2) [circle,draw,minimum size=8mm] (A) {$\alpha$}; \node at (0,-4) [circle,draw,minimum size=8mm] (B) ...
3
votes
1answer
321 views

Creating Tic-Tac-Toe boards with LaTeX/TikZ

I am trying to create a diagram of tic-tac-toe boards similar to the one attached below. I cannot seem to find any documentation or examples on how to create these boards in LaTeX or TikZ. Does ...
1
vote
1answer
288 views

Depth-first traversal of a binary tree

How can I achieve the drawing of a depth-first traversal of a binary tree like in this picture ?
20
votes
1answer
495 views

Drawing Bruhat--Tits trees with TikZ

I am not a regular user of TikZ, and I was wondering if there was a quick way of drawing trees that look like ? (the picture seems to have been taken from page 71 of J. P. Serre's book on trees). ...
1
vote
1answer
134 views

How to write a tree with no (visible) root with TikZ?

I’m trying to write a tree structure in TikZ. The trees in question are labelled on the leaf only; there is no label on inner nodes. Because I don’t use node on inner nodes, the tree structure joins. ...
3
votes
1answer
91 views

tikz draw tree with extra column

01, 001 and 0001 are not actually "childs". How do I add K=1,2,3 and K=4 to the left hand column? And I tried really hard to adjust the distance. But this is the best I can do. Thanks. ...
7
votes
1answer
302 views

Draw randomized tree in TikZ

I am trying to draw a randomized tree using TikZ, that is, I'm looking for a macro \randtree{NN}{x} that attaches a randomized tree of maximum depth x to a node named NN. The nodes need not be visible ...
10
votes
1answer
357 views

Drawing PQ-trees

I need to draw PQ-trees in LaTeX which look like these: I tried trees in tikz but I had two problems: partially shade rectangles use vertical pointers from children to the parent, if the parent ...
7
votes
1answer
312 views

Trees in latex : Depth of 4 nodes

I am following the current tutorial (MWE) : link However, I am facing difficulties to perform a tree of 4 nodes. Items are superposed, and even if I add a child [missing] {} it doesn't solve the ...
8
votes
2answers
455 views

how to draw a diagram that forks out, then joins in the middle then forks out again?

Update: ref comments: I've slightly corrected the terminology and the title. I am using the term diagram now, instead of tree, and I am just asking on how to draw this diagram in Tikz. Any tool or ...
6
votes
1answer
306 views

Customized edge in forest tree

Following the examples in the documentation, it is not too difficult to customize the edge of trees using the tikz-qtree package. The following code illustrates it: \documentclass{standalone} ...
3
votes
1answer
350 views

Vertical path to node in TikZ trees

How can I set the path between two specific nodes to "vertical" rather than "direct"? Currently my tree looks like this: \begin{tikzpicture}[level distance=1.5cm, every ...
11
votes
1answer
562 views

Using beamer overlays with forest generated trees

I am using the forest package from Sašo Živanović in order to create a wide tree on a beamer slide. Previously, I was using qtree. But due to the easier way of arranging nodes automatically with ...
2
votes
2answers
343 views

Drawing tree like structure

I have to draw the following figure. What I have now is uggly. Somehow the structure should be more balanced. Is there a way to do this with tikz-qtree? The point is that it is multiple dominance and ...
5
votes
1answer
541 views

Square edges in forest package

I can easily do trees with horizontal (square) edges in tikz-qtree (see MWE). The forest package is however a far superior alternative for my purposes. However, every attempt to do either horizontal ...
2
votes
2answers
784 views

[Tikz-]Qtree: force direction of single child to left or right?

I'm trying to draw a tree that has internal nodes with only one child, but which must be oriented. / \ /\ \ /\ Instead of the typical qtree where said children just "hang": ...
14
votes
1answer
412 views

Is it possible to emulate qtree with forest?

This question was actually asked by Alan Munn in a comment to How do I create a LCM tree diagram?. I repeat (and self-answer) it here because the answer is too long to fit the margin :-) qtree is a ...
12
votes
1answer
437 views

draw a many edge from a node- Tree - tikz

i want to draw the tree in the following picture : i have write : \documentclass{article} \usepackage{tikz} \usepackage{color} \definecolor{red}{rgb}{1,0,0} \begin{document} ...
7
votes
2answers
175 views

Seeking improvement on a poor solution---for descendant charts

I've a solution to a problem that screams out for improvement. I'm working on a second edition of a family history (mine) that has a great number of descendant charts. I've cobbled together a way of ...
5
votes
1answer
442 views

How to fix the overlapped nodes with long text, in TikZ. Concept maps

I'd like to get helping from you. I want to have paragraphs in the nodes of the concept map with Tikz, I mean, texts with multiple lines. I have a problem with texts, the nodes are overlapped. Here's ...
6
votes
3answers
1k views

drawing a syntax tree in tikz

I would like to draw a syntax tree, which resembles the below syntax tree. I know that I can use tikz to draw syntax trees, but I can't seem to figure out how to draw a straight line down to a node, ...
10
votes
1answer
820 views

Tikz tree and position of single leaf in binary tree

I am constructing a binary tree which looks as follows: \begin{tikzpicture} \node {root} child { node {left} } child { node {right} child { node {rightmost} } ...
10
votes
1answer
158 views

Indefinite Subtrees

While doing tree proofs, sometimes we need to consider a root with some subtrees, but we don't know the exact properties of the subtrees, so we just represent them using triangles. Is it possible to ...
0
votes
0answers
64 views

Strange line width problem with tikz-qtree [duplicate]

Possible Duplicate: TikZ borders showing through when they shouldn’t (overlapping circles) I have a strange problem with using tikz-qtree where the thickness of the lines are a bit odd. ...
6
votes
1answer
2k views

I'm getting the error: ! Paragraph ended before \@@label was complete

I've scoured this forum and it looks to me like I'm setting up the tree correctly, but I'm still getting this error, I have \usepackage{tikz} \usepackage{tikz-qtree} in the header. Here is the ...
3
votes
2answers
844 views

place several figure into one -tikz

I draw several trees and now I want to place them in a figure ( side by side or one below the other ) \documentclass{report} \usepackage{tikz} \usetikzlibrary{fit,shapes} \begin{document} ...
5
votes
1answer
636 views

Incomplete arrows and missing arrow heads in TikZ

I have the following plot which looks good, but there are two issues: Not all arrows have arrow-heads. I have no idea why this is. Some edges are not long enough. For example, the left edge of the ...
6
votes
1answer
428 views

How do I draw curve crossing one edge of a tree (using tikz-qtree)?

I am using tikz-qtree, and I'd like to draw a curve separating a set of nodes from the rest of the tree. For example, \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} ...
8
votes
3answers
304 views

Problem using macros to define tree substructures

Relatively simple problem: I want to use macros to define substructures of a tree. In the following example for illustration, I want to define some children (left and right) to be used several times ...
3
votes
0answers
125 views

Draw Tree using tikz [duplicate]

Possible Duplicate: Drawing a tree where many nodes have the same child in TikZ I'm trying the draw a tree using the tikz package, \begin{center} \begin{tikzpicture} ...
5
votes
1answer
439 views

Tree using Latex

I want to to reduce the size of the node to which they perceived better in my presentation; the problem is that the nodes are overlap. I have the code from Drawing a tree where many nodes have the ...
9
votes
1answer
723 views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling ...
8
votes
1answer
1k views

How to draw a joining line between two picture tikz-pgf

I'am having draw two tree using the tikz-pgf package \begin{frame} \begin{columns}[c] \begin{column}{2cm} \begin{tikzpicture}[scale=0.5] \tikzstyle{level 1}=[sibling distance=10mm] ...
6
votes
1answer
2k views

TikZ: Draw a B+ Tree

Having consulted this and this thread, I think the multipart feature of TikZ might just do what I need (see picture below). Is there any way to hide the vertical lines between node parts and still be ...