{trees} is for questions about drawing or constructing tree {diagrams} (for example, family trees).

learn more… | top users | synonyms

6
votes
1answer
508 views

How to create syntactic trees and align them in LaTeX?

I want to create syntactic trees and align them in LaTeX as in the picture below. Can you help me?
12
votes
1answer
683 views

Using beamer overlays with forest generated trees

I am using the forest package from Sašo Živanović in order to create a wide tree on a beamer slide. Previously, I was using qtree. But due to the easier way of arranging nodes automatically with ...
2
votes
2answers
382 views

Drawing tree like structure

I have to draw the following figure. What I have now is uggly. Somehow the structure should be more balanced. Is there a way to do this with tikz-qtree? The point is that it is multiple dominance and ...
7
votes
1answer
765 views

Square edges in forest package

I can easily do trees with horizontal (square) edges in tikz-qtree (see MWE). The forest package is however a far superior alternative for my purposes. However, every attempt to do either horizontal ...
2
votes
2answers
1k views

[Tikz-]Qtree: force direction of single child to left or right?

I'm trying to draw a tree that has internal nodes with only one child, but which must be oriented. / \ /\ \ /\ Instead of the typical qtree where said children just "hang": ...
2
votes
0answers
455 views

Simple dendrogram [closed]

I am just trying to create a simple dendrogram in beamer to develop an intuition for heirarchical clustering and I have tried several sites and several tree diagrams but cannot get anything to do what ...
4
votes
1answer
405 views

Nodes within leaf text in tikz-qtree?

I'm trying to draw a box around only part of the text in a tikz-qtree tree, but the closest I can do is this: \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{document} ...
4
votes
2answers
581 views

Restoring qtree spacing in tikz-qtree

Is it somehow possible to achieve the same node spacing in tikz-qtree as in the original qtree package? Compare the two: qtree: tikz-qtree: The spacing between nodes in one level should be the ...
15
votes
1answer
509 views

Is it possible to emulate qtree with forest?

This question was actually asked by Alan Munn in a comment to How do I create a LCM tree diagram?. I repeat (and self-answer) it here because the answer is too long to fit the margin :-) qtree is a ...
12
votes
1answer
474 views

draw a many edge from a node- Tree - tikz

i want to draw the tree in the following picture : i have write : \documentclass{article} \usepackage{tikz} \usepackage{color} \definecolor{red}{rgb}{1,0,0} \begin{document} ...
7
votes
2answers
187 views

Seeking improvement on a poor solution---for descendant charts

I've a solution to a problem that screams out for improvement. I'm working on a second edition of a family history (mine) that has a great number of descendant charts. I've cobbled together a way of ...
5
votes
1answer
510 views

How to fix the overlapped nodes with long text, in TikZ. Concept maps

I'd like to get helping from you. I want to have paragraphs in the nodes of the concept map with Tikz, I mean, texts with multiple lines. I have a problem with texts, the nodes are overlapped. Here's ...
0
votes
0answers
243 views

Example template for a hierarchy diagram [duplicate]

I wanted to draw a tree diagram so that i can put citations beside the node texts. Is there an example in code?
6
votes
3answers
2k views

drawing a syntax tree in tikz

I would like to draw a syntax tree, which resembles the below syntax tree. I know that I can use tikz to draw syntax trees, but I can't seem to figure out how to draw a straight line down to a node, ...
2
votes
0answers
295 views

How to convert Newick tree format to TikZ? [closed]

I need to draw a number of large phylogenetic tree diagrams in a document and it appears that tikz-qtree may be the best package for this task. A manual approach does not seem the best solution to ...
10
votes
1answer
1k views

Tikz tree and position of single leaf in binary tree

I am constructing a binary tree which looks as follows: \begin{tikzpicture} \node {root} child { node {left} } child { node {right} child { node {rightmost} } ...
10
votes
1answer
172 views

Indefinite Subtrees

While doing tree proofs, sometimes we need to consider a root with some subtrees, but we don't know the exact properties of the subtrees, so we just represent them using triangles. Is it possible to ...
1
vote
0answers
183 views

Using tree-dvips with pdflatex? [closed]

It seems like using tree-dvips with pdflatex is not very easy. It has been documented in various places in the web. I wouldn't mind using latex and then convert to PDF, but I am actually interested ...
0
votes
0answers
65 views

Strange line width problem with tikz-qtree [duplicate]

Possible Duplicate: TikZ borders showing through when they shouldn’t (overlapping circles) I have a strange problem with using tikz-qtree where the thickness of the lines are a bit odd. ...
4
votes
2answers
880 views

complex nodes with tikz-qtree

I am trying to convert my tree-dvips trees into something that is compatible with xelatex. I had a look at the tikz-qtree package, but it seems to be impossible to set complex nodes. In the old qtree ...
3
votes
2answers
505 views

Using tree-dvips with XeLaTeX

I try to switch to XeLaTeX, but the package tree-dvips causes problems. It seems to require PostScript and pdftricks which causes a lot of other problems (puts a \begin{center} environment around ...
3
votes
1answer
573 views

A simple tree for a website structure?

I would create a simple picture of a small websitestructure and i found these nice example http://www.texample.net/tikz/examples/family-tree/. But I would change some things and I don't know if it is ...
6
votes
2answers
2k views

I'm getting the error: ! Paragraph ended before \@@label was complete

I've scoured this forum and it looks to me like I'm setting up the tree correctly, but I'm still getting this error, I have \usepackage{tikz} \usepackage{tikz-qtree} in the header. Here is the ...
3
votes
2answers
1k views

place several figure into one -tikz

I draw several trees and now I want to place them in a figure ( side by side or one below the other ) \documentclass{report} \usepackage{tikz} \usetikzlibrary{fit,shapes} \begin{document} ...
6
votes
1answer
707 views

Incomplete arrows and missing arrow heads in TikZ

I have the following plot which looks good, but there are two issues: Not all arrows have arrow-heads. I have no idea why this is. Some edges are not long enough. For example, the left edge of the ...
6
votes
1answer
479 views

How do I draw curve crossing one edge of a tree (using tikz-qtree)?

I am using tikz-qtree, and I'd like to draw a curve separating a set of nodes from the rest of the tree. For example, \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} ...
1
vote
1answer
481 views

Draw a tree with variable node number

I would like to draw a tree in tex that is more like a sketch of a tree: It should contain variable node numbers. Important is, that the dots are contained in the tree drawn. Is that possible with ...
8
votes
3answers
327 views

Problem using macros to define tree substructures

Relatively simple problem: I want to use macros to define substructures of a tree. In the following example for illustration, I want to define some children (left and right) to be used several times ...
3
votes
0answers
133 views

Draw Tree using tikz [duplicate]

Possible Duplicate: Drawing a tree where many nodes have the same child in TikZ I'm trying the draw a tree using the tikz package, \begin{center} \begin{tikzpicture} ...
5
votes
1answer
468 views

Tree using Latex

I want to to reduce the size of the node to which they perceived better in my presentation; the problem is that the nodes are overlap. I have the code from Drawing a tree where many nodes have the ...
9
votes
1answer
818 views

draw an ellipse into a Tree picture -tikz package

I have draw a tree using tikz package like this \begin{tikzpicture} \tikzstyle{level 1}=[sibling distance=40mm] \tikzstyle{level 2}=[sibling distance=20mm] \tikzstyle{level 3}=[sibling ...
8
votes
1answer
1k views

How to draw a joining line between two picture tikz-pgf

I'am having draw two tree using the tikz-pgf package \begin{frame} \begin{columns}[c] \begin{column}{2cm} \begin{tikzpicture}[scale=0.5] \tikzstyle{level 1}=[sibling distance=10mm] ...
3
votes
2answers
275 views

Demonstrating syntax of a sentence [duplicate]

Possible Duplicate: How to draw syntactical trees with parallel leafs for a natural language? Consider page 4 in following paper: Pantcheva 2007 Which package can be used to draw a ...
8
votes
2answers
2k views

TikZ: Draw a B+ Tree

Having consulted How do I draw a B+ tree with tikz in latex with more than 4 Key value pair in a node and How do I draw a B+ tree in latex? threads, I think the multipart feature of TikZ might just do ...
4
votes
1answer
2k views

AVL Trees in TikZ: draw outside of node

I'm trying to draw an AVL tree with TikZ. I got the basic tree structure covered, but I'm not sure how to draw the balance factor outside of the node (see picture below). Any suggestions?
3
votes
1answer
2k views

TikZ - game tree representation with continuum of moves

I have been using TikZ to draw game-trees for my game-theory lectures (mostly using the automata package) but I could not figure out how to draw an arc across the edges the leave a given node. When we ...
6
votes
1answer
268 views

What is a suitable package for drawing term algebra style trees

I want to be able to draw something like nested triangles that are arranged in a tree-like fashion. Or explicitly, a node of a tree is represented as an isosceles triangle pointed upward. Each ...
1
vote
1answer
434 views

Aligning trees built with tikzpicture

I want to align some trees I am creating. I want the root node of all the trees to be on the same line. Currently for each tree I create, the root node of each subsequent tree is on a line after the ...
6
votes
2answers
4k views

Tools for tree diagram

I would like to make a simple scheme looking like tree diagram (structure like this or that). The problem is that all the packages I did try, could make nice binary trees with little information in ...
2
votes
1answer
440 views

Writing a line from two sibling nodes in a TikZ tree

Recently I am struggling on TikZ and it is really difficult to find options and solutions considering it is such a huge and comprehensive library. What I actually would like to do is drawing, in a ...
1
vote
1answer
987 views

Problems with tikz tree growth on secondary levels in trees

I have the following code: \begin{tikzpicture}[grow=right, sloped] \tikzstyle{level 1}=[level distance=1.3cm, sibling distance=1cm] \tikzstyle{level 2}=[level distance=1.2cm, sibling distance=1cm] ...
4
votes
2answers
3k views

How to draw a horizontal tree with branches on the right and left?

I need to draw trees but they should extend (from the root) on both sides. TikZ seems a good solution but do not how to manage it.
4
votes
1answer
2k views

TikZ-tree: edge-alignment in horizontal org-chart

I'm working on some sort of org-chart/hierarchy-tree and ran into issues with the edge-alignment. As a guideline I used the family-tree-TeXample. See the TeX.sx-dicussion here. However, the text in ...
3
votes
1answer
1k views

Alignment of node labels in tikz-qtree

I am trying to draw a refutation tree: \documentclass{article} \usepackage{tikz} \usepackage{tikz-qtree} \begin{document} \begin{tikzpicture} \Tree [.\node[label= {$\langle ...
6
votes
1answer
1k views

How to specify left and right node of a tikz-qtree

I'm drawing a binary tree using tikz-qtree. In my binary tree the order of children is important, so I need distinguish which edge is the left one and the right one. In my sample code I can't ...
3
votes
1answer
363 views

How to generate labels next to junctions and avoid self-collision with tikz?

I have an ASCII-art phylogenetic tree that looks (in part) like /------ PLN /-----+ 0.9 | \------ IL1 /--------+ 1.8 | | /----- PVD | ...
5
votes
1answer
532 views

How to align a vertical tree to the upper-left corner?

How do I align vertical trees to to the top? This is my current tree:       I want to get this tree:                  ^ That's a part of ...
4
votes
1answer
384 views

Package for energy budget trees

Is there a package that can typeset trees used for energy budgets? The image is an extract from Dynamic Energy and Mass Budgets in Biological Systems by B.Kooijman which is easily identifiable as ...
4
votes
1answer
839 views

Visualizing broad Tikz tree graph

Modules of software I created produce Tikz QTree diagrams for visualisation. The problem is that some trees grow quite broad... Even when I try to massively shrink them by Tikz settings, I cannot ...
27
votes
1answer
3k views

How can I improve this family tree in TikZ?

To answer a question about how to draw family tree on LaTeX-Community.org, I created an example: \documentclass{minimal} \usepackage{tikz} \usetikzlibrary{trees} \begin{document} ...