Tagged Questions
1
vote
0answers
42 views
How to position wide figures in two column documents
I want to an image at the bottom of a page in a two column document. Using figure* causes the image to jump to jump to the bottom of the document. Is there a way to do avoid this?
Here is an example:
...
3
votes
2answers
47 views
Placing image in second column of two column page
I would like to use a two column layout and have images and text in the second column begin at the top of the page and continue down with even spacing. I've tried using the multicol package as well, ...
0
votes
0answers
22 views
Use a column in a twocolumn layout only for images when requested
to present additional informations I would like to use one column of a twocolumn layout, whichs moves to a certain header.
That would mean that all written informations should be presented in the ...
3
votes
1answer
58 views
Is that possible to put one figure in the top and one two-column figure in the bottom of a same page?
I am adding figures into a two-column LaTeX file. In one page, I need to put a one-column figure and a two-column figure in a same page. The one-column figure should be in the top of the page and the ...
2
votes
1answer
79 views
How to share a one column figure with two column text on same page
I am writing an article that is composed of a two column body. But on one page, I want a figure that takes up both columns at the top and below I want to continue writing in two column text.
So far I ...
3
votes
1answer
82 views
Figure width problem
I have a problem in a figure which i draw, the figure doesn't fit in one column of two column paper as shown in the fig below, any help?
\begin{figure}{H}
\centering
\begin{tikzpicture}[
...
3
votes
1answer
193 views
How to put a full-width table at the top or bottom of the same two-column page as the reference text?
I'm posting today because I would like to reduce white space in a document I'm writing.
The content is two-columns but I have floating tables that span across both columns (table*).
At some point, ...
6
votes
1answer
126 views
Figure and text vertical alignment in two column document
I am trying to set a layout for a twocolumn book with a particular page layout (specified with the geometry package) and with the text in both columns aligned to each other. For this I've already ...
5
votes
1answer
270 views
Image placement in LaTeX (twocolumn mode)
I'm beginning to work on my senior thesis for biochemistry and I'm excited to use LaTeX to make a nice looking final product.
I'm new to LaTeX though so I don't actually know that much about it. ...
0
votes
1answer
82 views
float a wide ctabular in two columns
I have a very long table (slightly more than 2 pages) and so, am using the ctabular environment of the memoir class. I understand how a float defeats the purpose of a continuous tabular but I would ...
2
votes
1answer
186 views
Tikzpicture in a two column way using a one column .cls template
I'm using a .cls IEEEtran from IEEE available here http://www.ieee.org/conferences_events/conferences/publishing/templates.html; and all document is in two columns.
I'm ploting using pgfplots a ...
0
votes
0answers
50 views
Force full with float into position when using twocolumn [closed]
I am writing a document which is in two columns and I wish to have a float across the bottom of the first page. I am using figure* to make it full width.
All the advice I have read says to use [h] or ...
2
votes
1answer
73 views
Figure spans two columns, but text going over half the image
I am using the float package to force an image to right below where the authors section normally is on a journal paper. Using [H] I get the image to show up in the right place, but the text does not ...
1
vote
0answers
43 views
sidewaystable* in two-column document - emulateapj
I have a big table that I want to display sideways in an emulateapj document, but I get a weird result:
\documentclass[]{emulateapj}
\usepackage{amsmath}
\usepackage{amssymb}
\usepackage{booktabs}
...
0
votes
1answer
92 views
Display a figure over 2 columns in a 2 column layout on a fixed position
I would like to display a figure in a 2 column document, though the figure has to appear over the 2 columns on a fixed position. I tried this:
\begin{figure*}[H]
\begin{center}
...
1
vote
1answer
215 views
Left column with a figure to the right (Beamer)
I can't understand how to make a column to the left with a figure to the right:
Here is one example of what I did:
\documentclass{beamer}
...
\begin{frame}\frametitle{Title}
\begin{columns}
...
3
votes
0answers
158 views
Uneven columns in two-column paper format [closed]
I am writing a paper in two-column format. I avoid using the multicol package as I deal with quite a bit of within-column figures and would rather have them float. However, I am facing a problem that ...
1
vote
1answer
148 views
How to insert a two-column figure in the current page when using LaTeX?
I know there is a command like
\begin{figure}[p]
\end{figure}
But when I use it in a two-column model, the $[p]$ cannot work. So I am wondering if there is any solution to preserve the figure in ...
11
votes
2answers
254 views
How do I put a wide figure on the top of the first page of a two-column paper?
I'd like my academic paper to have a page-width-spanning figure right underneath the title. How do I do this? Whenever I try using \begin{figure*}...\end{figure*} with the figure at the start of my ...
5
votes
1answer
862 views
multiple algorithm2e algorithms in two column documents
I tried this example Place four algorithms (algorithm2e) in a subfigure and arrange them in two rows and two columns on two column documents. It doesn't work. The error message is
! LaTeX Error: [H] ...
0
votes
0answers
65 views
How to put an image accross double column? [duplicate]
Possible Duplicate:
How to make a figure span on two columns in a scientific paper?
Below is a page using IEEE trans, how to put the image (see Figure 1) accross two columns?
1
vote
1answer
83 views
table numbers are wrong for double column table
My:
\begin{table*}[t]
\begin{minipage}{\textwidth}
\begin{tabular}
\end{tabular}
\CaptionType{table}
\caption{...}
\label{tab:res2}
\end{minipage}
\\
...
2
votes
1answer
524 views
Add four images on a beamer frame
What is the best way to add four images on a beamer frame? I am using
\documentclass[slidestop,compress,11pt,xcolor=dvipsnames]{beamer}
\usefonttheme[onlymath]{serif}
\definecolor{LHCblue}{RGB}{4, ...
1
vote
2answers
174 views
One column figure blocks text in adjacent column
I am facing this strange problem where a figure in one column of a two-column page is blocking the second column. In other words, text is not going there in other column with a figure in the adjacent ...
5
votes
1answer
427 views
How to get a double column verbatim in a single column table, in a double column document?
I have a double column document in which I need to place two source code listings side by side. Naturally a two column document's single column is too narrow so the two listings need to span the page ...
0
votes
0answers
527 views
Problem in revtex while placing floats on the entire page [closed]
Ηey there,
I have a not so uncommon question, yet haven't found any answer that would work for me so far.
I am writing a two-column paper using revtex 4-1 and of course I face difficulties in ...
2
votes
3answers
1k views
LaTeX figures in two column
Is there a convenient way to place a figure* at the end of the current page instead of taking up the entire next page in the twocolumn environment? Placement modifiers [Hb] do not work.
4
votes
1answer
116 views
In a 2-columned document, how do you get a table to stretch across the entire width?
I'm working on a document that runs two columns of text down the page, like many scientific conference proceedings. However, I'd like for a table to run across the entire width of the page, as it is ...
2
votes
2answers
164 views
2-col floats and citation order problem
I am writing a document using IEEEtran class. And I am dealing with typical problem with 2-col floats (in my case a table).
I am aware of issue that a table has to be declared one page before than I ...
0
votes
0answers
294 views
Single Column Table Contains Pictures in IEEEtran Class [closed]
I am trying to place a table that contains a few pictures, covering the all 2 columns. I learned how to do it in article class, but I do not know how to do it IEEEtran class. What should I do to do ...
4
votes
2answers
452 views
Start placing figures on right-hand side column of first page
I am trying to use IEEETrans to write a scientific paper in two column format. The issue is that one is not allowed to place figures in the left-hand side column of the first page. Figures should ...
16
votes
3answers
8k views
Placing figures inside a two-column document
I'm trying to get images in my document in two different ways:
On top of the entire page, centered
On top of a single column
I tried it with both twocols and multicols. I ruled out twocols because ...
2
votes
1answer
789 views
How to center the caption in onecolumn space?
I used the commands \onecolumn and \twocolumn to have some images in one column, but now the images' captions are not centered. How can I solve this problem?
My code is like below:
\one column
...
3
votes
1answer
226 views
Input a figure between title and body in twocolumn form
I'm using a LaTeX to write a small paper using CVPR template.
I'd like to put a figure between my title+name and body(which consists with two columns) like many CVPR papers do, but I don't find the ...
8
votes
1answer
1k views
IEEE-Template: Algorithm over both columns
I'm currently working on a paper using the IEEEtran template. I do have a pseudocode I would like to put into this paper. In a former paper I saw that it is possible to put this algorithm in a box ...
1
vote
1answer
284 views
\twocolumn undefined control sequence }] [closed]
I am trying to add a figure (a center environment) two a \twocolumn command. I tried this:
\documentclass[10pt,twocolumn]{article}
\usepackage{graphicx}
\usepackage{subfig}
\begin{document}
...
2
votes
1answer
6k views
Creating a table in two column style page
I want to create a table, in a two column style page (IEEEtran) which will range in both columns. Any idea about this issue?
2
votes
1answer
117 views
Is there a modern equivalent to the midfloat package?
The package claims to do the wonder of placing a one-column text in a two-column document, without ejecting the page. This seems to work, but breaks when I try to place a figure within the strip ...
2
votes
1answer
1k views
Figures and Tables 'push down' text in the right column
When I use the IEEE two-column latex template, sometimes the text in the right column does not start at the top, but gets 'pushed down'. This happens sometimes when adding figures or table. A similar ...
2
votes
1answer
336 views
A table and a figure, with captions, in the same wide float in a two-column document?
I'm trying to place a figure and a table inside the same wide float so that they are positioned together within a two-column document. However, they also need separate captions (i.e. a figure caption ...
2
votes
1answer
524 views
Want a big table in top-center of a two-column article page
\documentclass[11pt, twocolumn]{article}
\usepackage{fontspec} %%Should compile with XeLatex
\defaultfontfeatures{Mapping=tex-text}
\setmainfont[SmallCapsFont = Delicious SmallCaps]{Delicious-Roman} ...
0
votes
2answers
6k views
figure span to one column on double column page [duplicate]
Possible Duplicate:
How to make a figure span on two columns in a scientific paper?
I want my figures to span to whole page width while on double
column page, I am using subfloat, how to ...
6
votes
1answer
781 views
How do I make a figure that spans a spread of two pages? [duplicate]
Possible Duplicate:
How to include a picture over two pages, left part on left side, right on right (for books)?
I have a huge TikZ graphic inside a figure environment. I would like it to ...
2
votes
1answer
382 views
Avoid consecutive figures in two columns layout
Is there a way to tell LaTex to avoid putting figures consecutively in a single column. Instead, I want to distribute the figures in the top of the columns and/or other pages in the same way (only ...
4
votes
2answers
367 views
How to make table extend onto second column
I have a two column document and a long table. I would like the table to start in one column and then extend into the next column.
I know about the table* environment; I don't want a table that is ...
3
votes
2answers
524 views
table causing misalignment in two column layout
I'm fairly new to LaTeX and I've run into a problem I'm not even sure how to Google. I'm using the two column document class IEEEtran for a scientific paper. However the text in the right hand column ...
2
votes
1answer
5k views
Displaying a wide figure in a two-column document [duplicate]
Possible Duplicate:
How to make a figure span on two columns in a scientific paper?
It's my first time working with a two-column document (declared as an argument to \documentclass) and I ...
4
votes
1answer
239 views
Forcing figures position in (last page) column
I'm writing a two columns document and I have two figures on the last page stacked in one column. The first one at the top and the second one almost at the bottom. How can I force the second one to be ...
5
votes
2answers
2k views
How to enforce the position of table* (wide table)
I'm writing a paper using SIGPLAN conference 2 columns format. I maintain separate .tex files per each chapters:
%% main.tex
\documentclass[preprint, 10pt]{sigplanconf}
\usepackage{ ... }
...
...
5
votes
2answers
4k views
How to insert figures in two columns?
In my case the figure disappears.
\documentclass[a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{multicol}
\usepackage{lipsum}
\usepackage{tikz}
\begin{document}
\begin{multicols}{2}
...
