{two-column} is about the \twocolumn command and the class option of the same name. For questions about the {multicol} package, use the appropriate tag instead.

learn more… | top users | synonyms

0
votes
0answers
61 views

How to automatically (semi, if not fully) convert two-column LaTeX paper into MS-Word

I could not find full automatic conversion with math formulas and figures. Thought, let me get converted to ASCII then I will paste and format. Even that did not work well due to two-columns. I had to ...
4
votes
2answers
126 views

Showing two listings in a table side-by-side [duplicate]

I wonder is there any possibility to show two different listings in one table side by side? Here is my code that only show one listening but how can I embed it in a table and another one? EDIT: Even ...
4
votes
1answer
65 views

Picture taking up the space left on last (twocolumn, balanced) page

Let's say I have a two-column scrbook document, with its last page of each chapter balanced by using the balance package because multicol is not an option for me for reasons that are not part of this ...
1
vote
1answer
56 views

Why each section is shown in one page rather than in the same page when I use \onecolumn?

I don't know why each section is shown in one separate page when I use \onecolumn rather that the normal (two columns) format. \onecolumn \section{Goals} some text
3
votes
2answers
178 views

figure* environment skips page while using two-column document

I was told to use table* rather than the table environment to insert a table in a two-column document which is too small to fit in a single column. When I try to do the same thing with a figure, The ...
1
vote
1answer
112 views

Change to two columns

I have a paper written in LNCS style. Is there any easy way to convert it to a two-column style? Simply using /two-column doesn't work as the columns are narrow, lines overflow, and it looks terrible ...
0
votes
0answers
60 views

Make footnote span entire text width in `twocolumn` mode in `memoir`

I am trying to use the twocolumn option from memoir but it is also formatting the footnotes into two columns. \documentclass[12pt,twocolumn]{memoir} \usepackage{lipsum} \begin{document} \chapter{The ...
6
votes
1answer
66 views

How do I find memoir's margin settings for twocolumn mode?

I have a long document that I don't want to use twocolumn mode for, but I like the margins it uses. I'm going to manually use multicol to create two columns instead (so I can easily have footnotes and ...
6
votes
1answer
91 views

One column text under chapter title in memoir twocolumn mode?

I want to have one column text underneath the chapter name in twocolumn mode (where the majority of the text is in twocolumn). I can't. Even using onecolabstract doesn't do it. ...
2
votes
1answer
75 views

Full Width Table of Contents in Two Column Document (any document class)

How can one create a full width table of contents in a two column document, independent of documentclass?
2
votes
1answer
59 views

Specified Column Width, Centered Positioned Colum with Doouble Line (with bold line) in first row

How to create similar to this table in LaTeX for IEEE Transaction I am trying to make using similar to this one but cant make similar to the attached sample. \usepackage{array} \begin{table} ...
0
votes
0answers
41 views

Single Column layout

I'm writing a technical port as part of my studies, but, I'm learning how to use LaTeX. I have a skeleton structure based approach that requires makefiles. I cannot seem to figure out how I would ...
2
votes
1answer
105 views

Subfigures in a columnwide figure in a two-column document

I am trying to put two figures next to each other in the top of a two-column document. I found the following code on the internet and it works: ...
6
votes
1answer
106 views

Uneven columns' height!

I'm new to LaTeX and, although I find the program quite interesting, it is difficult to get things right immediately. This time I need to do something simple, but I haven't managed to find a solution. ...
8
votes
1answer
102 views

“Extra }, or forgotten \endgroup” when combining “fixltx2e” and “preview” packages

In a two-column document with figure* floats, where the preview package is set up to preview floats, compilation seems to fail if the fixltx2e package is loaded: \documentclass[twocolumn]{article} ...
3
votes
0answers
56 views

single column footnote in two column layout

I want to print my affiliation in the bottom of the chapter opening page as a footnote, I am using a two-column layout. Is it possible to get a single-column footnote in the two-column layout?
1
vote
1answer
55 views

Text in second column not starting where it should

\documentclass[margin]{res}[12pt] \usepackage{nth} \usepackage[T1]{fontenc} \setlength{\textwidth}{5.1in} \makeatletter \let\origsection\section ...
3
votes
1answer
223 views

Figure overlaps Table

When placing a table then a figure, the figure overlaps half the table.. Here is what the tex looks like: \begin{table}[h] ...
5
votes
1answer
100 views

ConTeXt: Font change shifts column content

Background I would like to place balanced itemized lists inside a two-column layout. Problem Changing the font affects the balanced layout; the fonts are: Chivo Gentium Basic Code The ...
2
votes
1answer
80 views

display both an image and a code, side-by-side

I'd like to display both an image and a code using pdflatex, side-by-side to illustrate a concept. The code uses listing package. How could I do that ?
1
vote
0answers
346 views

Putting two-column long figure in Revtex4-1

I have a problem with APS's revtex4-1. I want to place an twocolumn-wide figure at the bottom of the page. I know \begin{figure*}[position] picture \end{figure*} in {article} document class ...
0
votes
0answers
12 views

Even-spaced (two) columns in reference page using bibtex - automatically [duplicate]

I have a document I keep compiling, using latex and bibtex, and it automatically creates my reference page. My final page is references and I use two columns, so naturally, assuming the reference page ...
3
votes
1answer
90 views

latex figure figure* order

I am writing a journal which has two column. I am using {figure} as well as {figure*} to place the figures in one column as well as stretch across two columns. My problem is the order of the figures ...
8
votes
1answer
68 views

\pageref, but for columns

I need to point to a label on a page, but as my text is layed out in two columns, I'd also like to include the column (1 or 2). Is there a way to find out which column a label is in? ...
1
vote
1answer
116 views

Two column Algorithmicx with variable-width columns

In another post, @Jubobs suggested to use the multicol package around an algorithmic environment, to typeset the algorithm in two columns. Recently, I faced a rather aesthetic issue: It might be the ...
1
vote
0answers
92 views

XeLaTex Undefined control sequence []] with \twocolumn

I'm using the IEEEconf documentclass. I want the abstract to span two columns directly after the title so I added the following: \twocolumn[ \begin{@twocolumnfalse} \maketitle ...
4
votes
1answer
74 views

How can I automatically insert a command in a BibTeX-generated bbl file?

This question asks how to keep a code in a bbl file. Fortunately, the root cause could be found and solved without fiddling with the bbl file. Several answers pointed out that the bbl file should not ...
3
votes
2answers
143 views

Margin note left of mdframed images in a two column page

Is it possible to have a margin note to the left of the left column on the second page with this code and approximately halfway down the page? I cannot get it to show up using \marginpar or the ...
3
votes
1answer
97 views

Lstlisting in twocolumn document

I have a problem when using lstlisting in twocolumn document. At my university I have to make reports in twocolumn documents. My teacher send me pre done .tex file with this code in it: ...
4
votes
1answer
71 views

Changing side of line numbering in two columns documents part two

I have the same question as this one: tex.stackexchange.com/questions/9510/changing-side-of-line-numbering-in-two-columns-documents/ I'd like to use the listings package in a twocolumn document. An ...
7
votes
1answer
234 views

What is the advantage of using widetext package instead of cuted package?

I was looking for an answer to this question which is, by the way, unanswered :( After searching this site, I read many questions similar to this one, and I found out that all of the answers ...
5
votes
3answers
901 views

Uniformly itemize list in two columns throughout the document

How can I get lists arranged in two columns throughout the document. I would like to make changes only in preamble and not in the list. I am thinking of this structure . First item . second item ...
2
votes
0answers
103 views

Add an equation at the bottom of a KOMA-script article in twocolumn mode

how can I place a large equation at the bottom of a page when using the document class scrartcl with the twocolumn option enabled. I know about this solution using multicols, but I'd rather stick ...
0
votes
0answers
67 views

prevent page break while returning to twocolumn

I'm writing a IEEE conference paper. The format of paper is \documentclass[conference]{IEEEtran} For inserting a wide image i switched to one column using \onecolumn The image took half of my page. ...
4
votes
1answer
274 views

Splitting an algorithm across two columns

Consider the following short example, where a two column page is selected, and the algorithm is split across the two columns using a manual \pagebreak within the algorithm's code: ...
2
votes
1answer
162 views

Floats for order of figure in case of double column figure?

I have the following code: \subsection{sub1} \begin{figure*} \centering \includegraphics[scale=0.62]{fig1.png} \caption{ this is fig1. \label{fig:fig1} } \end{figure*} ...
0
votes
1answer
2k views

Placing a two-column figure using IEEEtran class

I have problems to get a two-column figure on the desired page. I'm using the IEEEtran class. here my minimal code: \documentclass[conference]{IEEEtran} \usepackage{cite} ...
5
votes
1answer
1k views

Latex widetext environment without the lines

In a two column latex document, I use widetext environment which results in a line above and below the widetext. This is to guide the reader from the two column to the widetext but I want to get rid ...
2
votes
1answer
109 views

Creating a two column table for a math class

I am having trouble creating two column tables. I want to create 2 two column tables side by side, but my code doesn't seem to work: \documentclass{article} \usepackage[english]{babel} ...
3
votes
1answer
58 views

Partial twocolumn itemize

Sometimes itemize/enumerate environments have some items who are quite short and some items who are longer. I wish to format such environments into a compact way. For example turning: * A * B * C * ...
2
votes
1answer
148 views

Right-justifying vertical subfigures in a two-column document

I am trying to include a pair of subfigures in my two-column document, stacked one on top of the other. I want them to be right-justified; to achieve this with individual figures I have been using ...
1
vote
1answer
134 views

Troubles with a two column document using tufte-handout

I found a LaTeX minimal guide (originally written by Alan Munn), and trying to translate it at the tufte-handout class I have a problem. I use an abstract environment that uses the full textblock ...
3
votes
1answer
80 views

Wide float positioning in two-column document

I am writing a lab report formatted in two columns. It is set to two columns at the beginning by\documentclass[a4paper,11pt,twocolumn]{article}, rather than using the multicols package, because I use ...
5
votes
1answer
382 views

Koma-Script (scrbook): twocolumn formatting and wide equation problem

I use scrbook class (see bellow) in my book and sometimes I need typeset wide equation. \documentclass[% ,fontsize=12pt % ,a3paper % pagesize ,twocolumn ]{scrbook} ...
4
votes
1answer
285 views

KOMA-Script (scrbook): onecolumn table of contents & minitoc in twocolumn document

I have problem with formatting of my tables of contents. Please see my MNWE below. I would like to switch all of my tables into one column layout. I try to use solution from this tex.stackexchange ...
3
votes
1answer
330 views

Span TikZ Picture Across Two Columns

I'm restricted to writing a paper with\documentclass[twocolumn,11pt]{article}, but I want to create a tikzpicture that spans across both of the columns, filling the width of the page. I have tried ...
6
votes
1answer
109 views

one-column figure in a two-column document goes to a next page

In a two-column document, I use the figure* environment to place a wide equation in a one-column format. It works fine, but the equation floats to the next page. What can I do to avoid this?
5
votes
1answer
284 views

Span text across columns in multicol

I am writing a long document with memoir class and multicol package, mostly writing in 2 columns. I am trying to insert a framed text that spans across the two columns, but does not break the flow of ...
1
vote
0answers
18 views

One column white space in double column? [duplicate]

I am writing in a double-column template (IEEE Conference Template). What has been bothering me is that once I have a figure/pseudocode/tikz in one column, sometimes it pushes the contents in the ...
1
vote
0answers
88 views

Single column figure leaves a blank in the other column?

I am writing in a double-column template (IEEE Conference Template). What has been bothering me is that once I have a figure/pseudocode/tikz in one column, sometimes it pushes the contents in the ...