Questions tagged [wrapfigure]
{wrapfigure} is an environment to allow flowing text around figures, usually defined by the {wrapfig} package or the {wrapfig2} package. To make clear, which version is used, you should also use tag {wrapfig} or {wrapfig2}.
743
questions
3
votes
1
answer
210
views
Wrapfigure not wraping around caption
I am kinda new to tex and I am confussed that wrapfigure is not wraping around caption properly. Here is my text :
\begin{wrapfigure}{r}{0.5\textwidth}
\vspace{-20pt}
\begin{center}
\...
3
votes
1
answer
2k
views
wrapfigure in a newtheorem environment: Why not put in correct place?
This must be easy but I can't figure out why the "figure" is not put at the
correct spot (in the example) with `wrapfigure'.
\documentclass{article}
\usepackage{graphicx}
\usepackage{wrapfig}
\...
3
votes
1
answer
3k
views
Wrapfig and page breaks after section heading
I'm experimenting with typesetting "pull quotes" using wrapfig and noticed some strange behaviour. Under certain conditions, having a wrapfigure at the beginning of the first paragraph after a new ...
3
votes
1
answer
5k
views
Wrap Figure Pushes Text Around
I have code like
\begin{wrapfigure}{r}{0.5\textwidth}
\centering
\includegraphics[width=0.4\textwidth]{Data/Graphs/shot.JPG}
\caption{Testing Apparatus}
\label{apparatus}
\end{wrapfigure}
Then on ...
3
votes
1
answer
876
views
Wrapfigure & Footnote, hyperlinks
I want to include a figure in my text. The text should be wrapped around this figure, thus using environment wrapfigure. In the figure's caption I need a footnote, that includes the reference to the ...
3
votes
1
answer
84
views
Aligning Graphics and multiple lines
I'm trying to align and image and some lines of text (not a paragraph) to resemble this.
this is my code:
\documentclass[a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{xcolor}
\usepackage[...
3
votes
1
answer
111
views
How can I expand / adjust the size (height) of a minipage to include the entire wrapfigure?
I have the following code:
\documentclass{article}
\usepackage{fontspec}
\usepackage{graphicx}
\usepackage{wrapfig}
\usepackage{parskip}
\begin{document}
\begin{minipage}{\linewidth}
\begin{minipage}...
3
votes
1
answer
309
views
Text fails to wrap a small table
I'm trying to create some exercises along with sample solutions. For each solution I want a small table on the left with the data from the exercise description and the actual calculations plus ...
3
votes
1
answer
4k
views
Text after wrapfigure out of place
After using {wrapfigure} and choosing the number of lines to wrap, a new paragraph still behaves as if I told it to continue wrapping. I'm sure that sounds confusing, here is an example. How can I fix ...
3
votes
1
answer
3k
views
Issue with placement of figure using wrapfig environment
As seen, I have used wrapfig package. However, I can see the fifth point (in the image attached) covers only half the width of the page. But that shouldn't happen, it should cover whole line. I do ...
3
votes
1
answer
2k
views
Wrong behaviour of wrapfigure environment when using "placement = outer"
I'm trying to place some pictures inside my text using the wrapfig package of Donald Arseneau with KOMAscript of Markus Kohm. The intention is to place the pictures partly in the margin area at the ...
3
votes
1
answer
669
views
Inserting wrapfig causes margin notes to disappear
I have this short example derived from this XeTeX CV template, which uses margin notes to show years. You can use the Mandrill picture for pic.jpg, and you could also use the original template to ...
3
votes
1
answer
7k
views
Wrapping text around figures in poster headerboxes
I am working on a poster with headerbox elements. In one of the boxes I try to have an image on the right side and have the text left of it. I tried different minipage and wrapfigure examples but the ...
3
votes
1
answer
215
views
Find a figure environment which could ragged the text into
I tried the wragfig package and picins package, but none of them could ragged the text into the figure. Does anybody know how to achieve the result:
3
votes
2
answers
454
views
Two wrapfigure overlapping; delay starting point of wrapfigure associated text
Working on my thesis and I want to have two wrapfigures (left and right) fit in one page. To be able to do this, one has to go inside the text area of the other. How can I delay locally the start of ...
3
votes
1
answer
2k
views
Placing an image by the side of the title in LaTeX
I'm trying to place an image besides the maketitle command without messing it up, but after a lot of trial and error, I have something that just partially resembles what I'm going for and the source ...
3
votes
1
answer
411
views
Place the tikzpicture environment inside a personalized box with mdframed
I am trying to place a graphic (with the tikz picture environment) on the right side of the text and within the environment of my custom box. Could you assure me or help me to place it correctly?
...
3
votes
2
answers
474
views
cannot make a wrapfigure
Does anyone know why i cannot make text around this wrapfigure ?
i have tries to move the image but with no success to make the text around the image
here the latex code:
\documentclass[apaper,...
3
votes
1
answer
1k
views
Controlling the whitespace padding around tikzpicture
I'm sure this has been asked here, but I can't seem to find a simple solution. I would like to use the wrapfigure environment to place a tikzfigure on the side of my text, as follows:
\documentclass{...
3
votes
1
answer
170
views
How can I draw slide with dashed hidden lines
I tried to draw hidden lines as shown in this picture but i could not figure out how to do it. Please help me to fix this problem, I try this code
\begin{document}
\begin{tikzpicture}[z={(3.85mm, -3....
3
votes
1
answer
2k
views
"Center" table offset, to account for floating figure?
I'm composing a document in which I use the wrapfig environment to let me wrap text around a floating figure. I've placed this figure (of width 0.3\textwidth) on the right of a page, and I'd like to ...
3
votes
1
answer
164
views
How to move first line of paragraph into block created by wrapfigure?
I have the following code:
\begin{wrapfigure}[7]{l}[3mm]{2.5cm}
\vspace{-12pt}
\includegraphics[scale=0.134]{pismena/n.png}
\end{wrapfigure}
ajskôr prišli slová, vzápätí tma.
Kračúň ubehol rýchlejšie,...
3
votes
1
answer
42
views
Spacing above and below a figure in wrapfigure mystery
In a simple setup that is
\documentclass{report}
\usepackage{amsmath,caption,wrapfig}
\usepackage{lipsum,blindtext}
\usepackage[demo]{graphicx}
\begin{document}
\lipsum[2]
\section{A Small Section}
\...
3
votes
1
answer
116
views
Wrap and scale text in Tikz
I am trying to wrap my text around the following picture but it doesn't seem to be working.
This is my MWE. And I have been trying to use wrapfigure but its not working the way I want to do.
\...
3
votes
1
answer
761
views
raggedright text writes over wrapfigure in a parbox
I want to have a parbox with an image in the top right corner and text floating around it. Using \wrapfigure, this works well. However, this doesn't seem to work with \raggedright, as the text simply ...
3
votes
1
answer
3k
views
Wide spacing of text next to a wrapfigure in latex
I've tried googling this for ages, but I can't find anyone else with this problem. As you can see in the included image, the text wrapping around the image gets a weird spacing, much wider than the ...
3
votes
1
answer
1k
views
What is causing a blank column below wrapfigure until end of chapter?
It happens when a wrapfigure is placed (by the system, not by myself) beside an ExSheets question.
This is a minimal working example:
\documentclass[a4paper,10pt]{book}
\usepackage{fontspec}
\...
3
votes
1
answer
459
views
circuitikz as a float
I used wrapfigure with its package to try to make a circuitikz as a float to put text beside, but I got a warning like
"wrapfigure used inside a conflicting environment"
and then it drops my ...
3
votes
1
answer
584
views
Wrapfigure with tikzpicture not appearing where it should
I am trying to insert insets of commutative diagrams into my tex, using wrapfigure and tikz. The first commutative diagram (inside a wrapfigure environment) appears as it should, but the second ...
3
votes
1
answer
2k
views
Problem with wrapfigure and line breaks in the text
How can I fix this problem? The text of the second paragraph overwrites the figure and doesn't contain line breaks.
\documentclass[parskip=half]{scrbook}
\usepackage[english]{babel}
\usepackage{...
3
votes
1
answer
641
views
Shifting text section to the right
I have a large picture on the left side of the page and text referring to the picture on the right side. My problem is that the code as it is atm makes the text overlap the figure. It looks like this:
...
3
votes
1
answer
432
views
Text on the left, picture on the right and other text follows
I use the following code to produce a picture on the right of the text
\documentclass[12pt,landscape]{article}
\usepackage[demo]{graphicx}
\usepackage{lipsum}
\usepackage{wrapfig}
\begin{document}
\...
3
votes
0
answers
99
views
Why is wrapping figures around text such a hard problem?
I'm writing a document where I wanted to wrap a list around a text box, and I eventually got the following result:
I had to search on the internet for hours before I found a way to wrap a list around ...
3
votes
0
answers
236
views
Error: File `pullquote.sty' not found
When I run these two, I get this error: File `pullquote.sty' not found.
\documentclass{article}
\usepackage{lipsum}
\usepackage[latin]{babel}
\usepackage{graphicx}
\usepackage{pullquote}
\begin{...
3
votes
1
answer
4k
views
Unreliable positioning of Wrapfigure
I am new to Latex and currently I am "probing" Latex for issues that I want an solution to before actually using Latex for work. My current problem is placement of wrapped figures. Wrapfigure{} seems ...
3
votes
0
answers
153
views
Wrap figure challenge: is it possible in LaTeX?
I am struggling with a problem: I need to have a lot of wrapfig positioned in the top right corner of the page.
I don't want to do a manual tweaking, but a solution similar to \begin{figure}[t], that ...
3
votes
0
answers
48
views
Dealing with columns while placing a figure at the top of next page [duplicate]
I am using ACM template and having problem while placing the figure at the top of next page.
I read threads here, but still instead of placing the figure at the top of whole page it only places it at ...
3
votes
1
answer
2k
views
wrapfigure with enumerate [duplicate]
I would like to use a wrapfigure with enumerate. But it doesn't work.
With this code:
\documentclass{article}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{tikz}
\usetikzlibrary{...
3
votes
0
answers
10k
views
Stationary wrapfigure forced to float
I have been using the wrapfigure for quite some time now and today, the following problem occured: My figure is floating instead of text being wrapped around it.
\documentclass[a4paper]{article}
\...
3
votes
0
answers
1k
views
How to insert Figure beside Text [closed]
As shown in attached
I am using memoir class to create my book.
What is the code should be?
3
votes
0
answers
173
views
Text-wrapping around image at top of page [duplicate]
Possible Duplicate:
Absolute positioning of wrapfig
I want to insert an image in a LaTeX document so that it is always positioned at the top of the page and the text flows around it.
I'm aware ...
2
votes
2
answers
630
views
Wrapfigure on top right corner
Hello I am using MikTex in TexStudios. I have this document:
\documentclass[paper=letter,fontsize=11pt]{scrartcl} % KOMA-article class
\usepackage[english]{babel}
\usepackage[utf8x]{inputenc}
\...
2
votes
2
answers
2k
views
Position figure (left, right, center ) minipage, wrapfigure etc.. and equation
I'm having a problem with the position of the equations and the image.
how come the second and third equations have an indentation and are not aligned? (in particular the second one). I think that by ...
2
votes
2
answers
1k
views
How do I raise a figure (placed with wrapfig) to be flush with the top of a paragraph?
I am using the wrapfig package to place a figure with text wrapped around it. Here is a minimal example, with a screenshot of the relevant part of the output below:
\documentclass{book}
\usepackage{...
2
votes
4
answers
828
views
Want to align figures
So I will try to make it as concise as possible.
This is what my code looks like
\begin{figure}[ht]
\centering
\begin{minipage}{.5\textwidth}
\begin{center}
\centering
\includegraphics[width=7cm]{II....
2
votes
2
answers
400
views
Custom built universal wrapfig using cutwin
The environment wrapfiguredoes not work well with theorem like environments. It can possibly be remedied by writing a custom (but restricted) mywrapfig environment using cutwin package. Which works OK ...
2
votes
1
answer
867
views
Initial with wrapfigure -- other idea?
The following minimal example shows how I'd like to make Initials in my document.
I make it with wrapfigure, but it seems to be hard to adjust manually or measure and adjust the height and width ...
2
votes
2
answers
324
views
Wrap Figure is not working properly in mdframed environment
I am using wrapfigure environment but I am getting some unwanted output. My code is
\usepackage{wrapfig}
\usepackage{lipsum}
\usepackage{mdframed}
\lipsum[2]
\begin{wrapfigure}{r}{0.5\textwidth}
\...
2
votes
2
answers
316
views
Miktex/XeLaTeX - wrong aligned images to the top of text using \wrapfigure
I'm trying to display image wrapped by text, but I'm not able to align them exactly. Image is always rendered one line below the begin of text block. Additionally, it's displayed line below even when ...
2
votes
2
answers
2k
views
Aligning graphics within wrapfigure
I'm trying to create a biography section for a list of authors am crammed for space. So when declaring the wrapfigure to provided text wrapping around each author's tessellated bio photo, I need to ...